Re: Looking for V210/V240 testers

Hello,

On Wed, 25 Feb 2026 21:15:31 +0100
Julian Coleman <[email protected]> wrote:

> Hi,
> 
> With the changes to the monitoring driver on the V210 and V240, we now
> show the limits set in the chip and warn if a limit is exceeded (as I
> mentioned before).  On my V240, I don't see any output and the chip limits
> seem reasonable.  However, on a V210, we see warnings that limits have
> been exceeded for external 1 and V3.0 0.
> 
> If anyone has a V210 or V240 to test a -current kernel, that would be
> very useful as a comparison.  You can also drop in a -current kernel
> from:
> 
>   https://nycdn.netbsd.org/pub/NetBSD-daily/HEAD/latest/sparc64/binary/kernel/
> 
> and check for lines like:
> 
>   adm1026hm0: critical over limit on 'external 1'

Here's my v210:
Sun Fire V210, No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.16.2, 6144 MB memory installed, Serial #63994595.

[   1.0000000] NetBSD 11.99.5 (MENTA) #0: Sat Feb 28 12:55:38 EST 2026

[     1.000000] adm1026hm0 at iic0 addr 0x2e: ADM1026 hardware monitor: rev. 0x4, step. 0x5
[     1.000000] adm1026hm0: 8 fans, 3 temperatures, 15 voltages
[     1.000000] lmtemp0 at iic0 addr 0x4e: temperature-sensor LM75 Temperature Sensor

~> envstat
                        Current  CritMax  WarnMax  WarnMin  CritMin  Unit
[adm1026hm0]
               fan 0:     12500                       2647            RPM
               fan 1:     12980                       2647            RPM
               fan 2:     12980                       2647            RPM
               fan 3:     12980                       2647            RPM
               fan 4:     16875                       2647            RPM
               fan 5:     16875                       2647            RPM
               fan 6:     16875                       2647            RPM
               fan 7:     17763                       2647            RPM
            internal:    39.000   80.000   55.000 -128.000           degC
          external 1:    62.000  100.000   80.000 -128.000           degC
          external 2:    52.000  100.000   80.000 -128.000           degC
               Vbatt:     0.518             4.000                       V
        V3.3 standby:     3.326             4.440                       V
           V3.3 main:     3.343             4.440                       V
                V5.0:     5.046             6.667                       V
                Vccp:     1.470             3.000                       V
                V+12:    11.922            16.001                       V
                V-12:   -12.026             2.500  -15.928              V
              V3.0 0:     1.529             3.000                       V
              V3.0 1:     2.506             3.000                       V
              V3.0 2:     2.529             3.000                       V
              V3.0 3:     1.212             3.000                       V
              V3.0 4:     2.517             3.000                       V
              V3.0 5:     0.000             3.000                       V
              V2.5 0:     1.245             2.500                       V
              V2.5 1:     1.470             2.500                       V
[lmtemp0]
  temperature-sensor:    23.500   80.000  degC

Guess I need to look at the battery...

I didn't enable the rtc at ebus yet, will check that one later.

have fun
Michael