Re: NetBSD/sun3 9.0_RC1 on 3/60

--000000000000fb29c2059bdfaad9
Content-Type: text/plain; charset="UTF-8"

I have not tried NetBSD on my ancient Sun systems for several years. I will
have time later this year to try it again. I have a 3/60, 3/80, and a 3/470
that all should work.

On Sat, Jan 11, 2020 at 10:55 AM Izumi Tsutsui <[email protected]>
wrote:

> Hi,
>
> Naruaki Etomi ([email protected]) kindly sent me working sun3/60 recently,
> then I've confirmed NetBSD/sun3 9.0_RC1 GENERIC works fine:
>
>  https://dmesgd.nycbug.org/index.cgi?do=view&id=5289
>
> root on sd0 is also working with full 24MB RAM:
> ---
>
> Selftest Completed.
>
> Sun Workstation, Model Sun-3/60C/G.
> ROM Rev 2.8.3, 24MB memory installed, Serial #57905.
> Ethernet address 08:00:20:06:A2:15.
>
> EEPROM: Using RS232 A port.
>
> Selftest Completed.
>
> Sun Workstation, Model Sun-3/60C/G.
> ROM Rev 2.8.3, 24MB memory installed, Serial #57905.
> Ethernet address 08:00:20:06:A2:15.
>
>
> Testing 24 Megabytes of Memory ... Completed.
>
> Auto-boot in progress...
> Boot: sd(0,0,0)
> >> NetBSD/sun3 ufsboot [1.13 (Wed Nov 27 16:14:52 UTC 2019)]
> ufsboot: trying netbsd
> 1754348+93012 [167792+151501]=0x211358
> starting program at 0x4000
> console is ttya
> [   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
> 2003, 2004, 2005,
> [   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014,
> 2015, 2016, 2017,
> [   1.0000000]     2018, 2019 The NetBSD Foundation, Inc.  All rights
> reserved.
> [   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
> [   1.0000000]     The Regents of the University of California.  All
> rights reserved.
>
> [   1.0000000] NetBSD 9.0_RC1 (GENERIC) #0: Wed Nov 27 16:14:52 UTC 2019
> [   1.0000000]  [email protected]:
> /usr/src/sys/arch/sun3/compile/GENERIC
> [   1.0000000] Model: sun3 60
> [   1.0000000] fpu: mc68881
> [   1.0000000] total memory = 24576 KB
> [   1.0000000] avail memory = 22096 KB
> [   1.0000000] mainbus0 (root)
> [   1.0000000] obio0 at mainbus0
> [   1.0000000] zsc0 at obio0 addr 0x0 ipl 6: (softpri 3)
> [   1.0000000] kbd0 at zsc0 channel 0: baud rate 1200
> [   1.0000000] ms0 at zsc0 channel 1: baud rate 1200
> [   1.0000000] zsc1 at obio0 addr 0x20000 ipl 6: (softpri 3)
> [   1.0000000] zstty0 at zsc1 channel 0 (console i/o)
> [   1.0000000] zstty1 at zsc1 channel 1
> [   1.0000000] eeprom0 at obio0 addr 0x40000
> [   1.0000000] oclock0 at obio0 addr 0x60000 ipl 5: intersil7170
> [   1.0000000] memerr0 at obio0 addr 0x80000 ipl 7: (Parity memory)
> [   1.0000000] intreg0 at obio0 addr 0xa0000
> [   1.0000000] le0 at obio0 addr 0x120000 ipl 3: address 08:00:20:06:a2:15
> [   1.0000000] le0: 8 receive buffers, 2 transmit buffers
> [   1.0000000] si0 at obio0 addr 0x140000 ipl 2: options=0xf
> [   1.0000000] scsibus0 at si0: 8 targets, 8 luns per target
> [   1.0000000] obmem0 at mainbus0
> [   1.0000000] bwtwo0 at obmem0 addr 0xff000000 (1152x900)
> [   1.0000000] enabling interrupts
> [   1.0300220] scsibus0: waiting 2 seconds for devices to settle...
> [   5.3500220] sd0 at scsibus0 target 0 lun 0: <MELCO, DSC-UE4.3G, 1.05>
> disk fixed
> [   5.3900220] sd0: 4103 MB, 12968 cyl, 6 head, 108 sec, 512 bytes/sect x
> 8403264 sectors
> [   5.4200220] sd0: async, 8-bit transfers
> [   7.9200220] boot device: sd0a
> [   7.9600220] root on sd0a dumps on sd0b
> [   8.0700220] root file system type: ffs
> [   8.1000220] kern.module.path=/stand/sun3/9.0/modules
> Sat Jan 11 15:30:47 GMT 2020
> Starting root file system check:
> /dev/rsd0a: file system is clean; not checking
> swapctl: adding /dev/sd0b as swap device at priority 0
> Starting file system checks:
> /dev/rsd0g: file system is clean; not checking
> Loaded entropy from /var/db/entropy-file.
> Setting tty flags.
> Setting sysctl variables:
> ddb.onpanic: 1 -> 0
> vm.anonmin: 10 -> 10
> vm.filemin: 10 -> 0
> vm.execmin: 5 -> 30
> vm.anonmax: 80 -> 50
> vm.filemax: 50 -> 5
> vm.execmax: 30 -> 50
> Starting network.
> Hostname: hydra
> Configuring network interfaces: le0.
> Adding interface aliases:.
> add net default: gateway 192.168.20.1
> Waiting for DAD to complete for statically configured addresses...
> Building databases: dev, utmp, utmpx.
> Starting syslogd.
> Could not open /dev/crypto: Device not configured
> Setting date via ntp.
> Mounting all file systems...
> Clearing temporary files.
> Updating fontconfig cache: done.
> Creating a.out runtime link editor directory cache.
> Checking quotas: done.
> Setting securelevel: kern.securelevel: 0 -> 1
> Starting virecover.
> Checking for core dump...
> savecore: (null): _dumpdev not in namelist
> Jan 12 00:35:02 hydra savecore: (null): _dumpdev not in namelist
> Starting local daemons:.
> Updating motd.
> Starting sshd.
> Starting inetd.
> Starting cron.
> Sun Jan 12 00:42:53 JST 2020
>
> NetBSD/sun3 (hydra) (ttya)
>
> login: tsutsui
> Password:
> Jan 12 00:47:59 hydra login: tsutsui on tty ttya
> Last login: Sat Jan 11 03:24:10 2020 on ttya
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
>     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
>     2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
>
> NetBSD 9.0_RC1 (GENERIC) #0: Wed Nov 27 16:14:52 UTC 2019
>
> Welcome to NetBSD!
>
> This system is running a release candidate of the NetBSD operating system,
> aimed at shaking out the most serious bugs that may affect the next formal
> release.  It should be considered close to release quality, but may still
> contain unresolved issues.
>
> You are encouraged to test this version as thoroughly as possible.  Should
> you
> encounter any problem, please report it back to the development team using
> the
> send-pr(1) utility (requires a working MTA).  If yours is not properly set
> up,
> use the web interface at: https://www.NetBSD.org/support/send-pr.html
>
> Thank you for helping us test and improve this NetBSD release candidate.
>
> But scientists, who ought to know
> Assure us that it must be so.
> Oh, let us never, never doubt
> What nobody is sure about.
>                 -- Hilaire Belloc
> hydra-%
> ---
>
> Miniroot installtion also works
>  https://gist.github.com/tsutsui/00d204d2e96ae45e05bf25ec776891f8
>
> except two minor bugs:
>
> - https://gnats.netbsd.org/54833
>  (miniroot install fails to configure network)
> - https://gnats.netbsd.org/54835
>  (miniroot install.sub uses sh(1) function not enabled with SMAL)
>
> I'll commit fixes for these two bugs soon.
>
> ---
> Izumi Tsutsui
>


-- 
Michael Thompson

--000000000000fb29c2059bdfaad9
Content-Type: text/html; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr">I have not tried NetBSD on my ancient Sun systems for seve=
ral=C2=A0years. I will have=C2=A0time later this year to try it again. I ha=
ve a 3/60, 3/80, and a 3/470 that all should work.</div><br><div class=3D"g=
mail_quote"><div dir=3D"ltr" class=3D"gmail_attr">On Sat, Jan 11, 2020 at 1=
0:55 AM Izumi Tsutsui &lt;<a href=3D"mailto:[email protected]">tsutsu=
[email protected]</a>&gt; wrote:<br></div><blockquote class=3D"gmail_quote"=
 style=3D"margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);p=
adding-left:1ex">Hi,<br>
<br>
Naruaki Etomi ([email protected]) kindly sent me working sun3/60 recently,<br=
>
then I&#39;ve confirmed NetBSD/sun3 9.0_RC1 GENERIC works fine:<br>
<br>
=C2=A0<a href=3D"https://dmesgd.nycbug.org/index.cgi?do=3Dview&amp;id=3D528=
9" rel=3D"noreferrer" target=3D"_blank">https://dmesgd.nycbug.org/index.cgi=
?do=3Dview&amp;id=3D5289</a><br>
<br>
root on sd0 is also working with full 24MB RAM:<br>
---<br>
<br>
Selftest Completed.<br>
<br>
Sun Workstation, Model Sun-3/60C/G.<br>
ROM Rev 2.8.3, 24MB memory installed, Serial #57905.<br>
Ethernet address 08:00:20:06:A2:15.<br>
<br>
EEPROM: Using RS232 A port.<br>
<br>
Selftest Completed.<br>
<br>
Sun Workstation, Model Sun-3/60C/G.<br>
ROM Rev 2.8.3, 24MB memory installed, Serial #57905.<br>
Ethernet address 08:00:20:06:A2:15.<br>
<br>
<br>
Testing 24 Megabytes of Memory ... Completed.<br>
<br>
Auto-boot in progress...<br>
Boot: sd(0,0,0) <br>
&gt;&gt; NetBSD/sun3 ufsboot [1.13 (Wed Nov 27 16:14:52 UTC 2019)]<br>
ufsboot: trying netbsd<br>
1754348+93012 [167792+151501]=3D0x211358<br>
starting program at 0x4000<br>
console is ttya<br>
[=C2=A0 =C2=A01.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, =
2002, 2003, 2004, 2005,<br>
[=C2=A0 =C2=A01.0000000]=C2=A0 =C2=A0 =C2=A02006, 2007, 2008, 2009, 2010, 2=
011, 2012, 2013, 2014, 2015, 2016, 2017,<br>
[=C2=A0 =C2=A01.0000000]=C2=A0 =C2=A0 =C2=A02018, 2019 The NetBSD Foundatio=
n, Inc.=C2=A0 All rights reserved.<br>
[=C2=A0 =C2=A01.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993<br>
[=C2=A0 =C2=A01.0000000]=C2=A0 =C2=A0 =C2=A0The Regents of the University o=
f California.=C2=A0 All rights reserved.<br>
<br>
[=C2=A0 =C2=A01.0000000] NetBSD 9.0_RC1 (GENERIC) #0: Wed Nov 27 16:14:52 U=
TC 2019<br>
[=C2=A0 =C2=A01.0000000]=C2=A0 [email protected]:/usr/src/sys/arch=
/sun3/compile/GENERIC<br>
[=C2=A0 =C2=A01.0000000] Model: sun3 60<br>
[=C2=A0 =C2=A01.0000000] fpu: mc68881<br>
[=C2=A0 =C2=A01.0000000] total memory =3D 24576 KB<br>
[=C2=A0 =C2=A01.0000000] avail memory =3D 22096 KB<br>
[=C2=A0 =C2=A01.0000000] mainbus0 (root)<br>
[=C2=A0 =C2=A01.0000000] obio0 at mainbus0<br>
[=C2=A0 =C2=A01.0000000] zsc0 at obio0 addr 0x0 ipl 6: (softpri 3)<br>
[=C2=A0 =C2=A01.0000000] kbd0 at zsc0 channel 0: baud rate 1200<br>
[=C2=A0 =C2=A01.0000000] ms0 at zsc0 channel 1: baud rate 1200<br>
[=C2=A0 =C2=A01.0000000] zsc1 at obio0 addr 0x20000 ipl 6: (softpri 3)<br>
[=C2=A0 =C2=A01.0000000] zstty0 at zsc1 channel 0 (console i/o)<br>
[=C2=A0 =C2=A01.0000000] zstty1 at zsc1 channel 1<br>
[=C2=A0 =C2=A01.0000000] eeprom0 at obio0 addr 0x40000<br>
[=C2=A0 =C2=A01.0000000] oclock0 at obio0 addr 0x60000 ipl 5: intersil7170<=
br>
[=C2=A0 =C2=A01.0000000] memerr0 at obio0 addr 0x80000 ipl 7: (Parity memor=
y)<br>
[=C2=A0 =C2=A01.0000000] intreg0 at obio0 addr 0xa0000<br>
[=C2=A0 =C2=A01.0000000] le0 at obio0 addr 0x120000 ipl 3: address 08:00:20=
:06:a2:15<br>
[=C2=A0 =C2=A01.0000000] le0: 8 receive buffers, 2 transmit buffers<br>
[=C2=A0 =C2=A01.0000000] si0 at obio0 addr 0x140000 ipl 2: options=3D0xf<br=
>
[=C2=A0 =C2=A01.0000000] scsibus0 at si0: 8 targets, 8 luns per target<br>
[=C2=A0 =C2=A01.0000000] obmem0 at mainbus0<br>
[=C2=A0 =C2=A01.0000000] bwtwo0 at obmem0 addr 0xff000000 (1152x900)<br>
[=C2=A0 =C2=A01.0000000] enabling interrupts<br>
[=C2=A0 =C2=A01.0300220] scsibus0: waiting 2 seconds for devices to settle.=
..<br>
[=C2=A0 =C2=A05.3500220] sd0 at scsibus0 target 0 lun 0: &lt;MELCO, DSC-UE4=
.3G, 1.05&gt; disk fixed<br>
[=C2=A0 =C2=A05.3900220] sd0: 4103 MB, 12968 cyl, 6 head, 108 sec, 512 byte=
s/sect x 8403264 sectors<br>
[=C2=A0 =C2=A05.4200220] sd0: async, 8-bit transfers<br>
[=C2=A0 =C2=A07.9200220] boot device: sd0a<br>
[=C2=A0 =C2=A07.9600220] root on sd0a dumps on sd0b<br>
[=C2=A0 =C2=A08.0700220] root file system type: ffs<br>
[=C2=A0 =C2=A08.1000220] kern.module.path=3D/stand/sun3/9.0/modules<br>
Sat Jan 11 15:30:47 GMT 2020<br>
Starting root file system check:<br>
/dev/rsd0a: file system is clean; not checking<br>
swapctl: adding /dev/sd0b as swap device at priority 0<br>
Starting file system checks:<br>
/dev/rsd0g: file system is clean; not checking<br>
Loaded entropy from /var/db/entropy-file.<br>
Setting tty flags.<br>
Setting sysctl variables:<br>
ddb.onpanic: 1 -&gt; 0<br>
vm.anonmin: 10 -&gt; 10<br>
vm.filemin: 10 -&gt; 0<br>
vm.execmin: 5 -&gt; 30<br>
vm.anonmax: 80 -&gt; 50<br>
vm.filemax: 50 -&gt; 5<br>
vm.execmax: 30 -&gt; 50<br>
Starting network.<br>
Hostname: hydra<br>
Configuring network interfaces: le0.<br>
Adding interface aliases:.<br>
add net default: gateway 192.168.20.1<br>
Waiting for DAD to complete for statically configured addresses...<br>
Building databases: dev, utmp, utmpx.<br>
Starting syslogd.<br>
Could not open /dev/crypto: Device not configured<br>
Setting date via ntp.<br>
Mounting all file systems...<br>
Clearing temporary files.<br>
Updating fontconfig cache: done.<br>
Creating a.out runtime link editor directory cache.<br>
Checking quotas: done.<br>
Setting securelevel: kern.securelevel: 0 -&gt; 1<br>
Starting virecover.<br>
Checking for core dump...<br>
savecore: (null): _dumpdev not in namelist<br>
Jan 12 00:35:02 hydra savecore: (null): _dumpdev not in namelist<br>
Starting local daemons:.<br>
Updating motd.<br>
Starting sshd.<br>
Starting inetd.<br>
Starting cron.<br>
Sun Jan 12 00:42:53 JST 2020<br>
<br>
NetBSD/sun3 (hydra) (ttya)<br>
<br>
login: tsutsui<br>
Password:<br>
Jan 12 00:47:59 hydra login: tsutsui on tty ttya<br>
Last login: Sat Jan 11 03:24:10 2020 on ttya<br>
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,<b=
r>
=C2=A0 =C2=A0 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2=
016, 2017,<br>
=C2=A0 =C2=A0 2018, 2019 The NetBSD Foundation, Inc.=C2=A0 All rights reser=
ved.<br>
Copyright (c) 1982, 1986, 1989, 1991, 1993<br>
=C2=A0 =C2=A0 The Regents of the University of California.=C2=A0 All rights=
 reserved.<br>
<br>
NetBSD 9.0_RC1 (GENERIC) #0: Wed Nov 27 16:14:52 UTC 2019<br>
<br>
Welcome to NetBSD!<br>
<br>
This system is running a release candidate of the NetBSD operating system,<=
br>
aimed at shaking out the most serious bugs that may affect the next formal<=
br>
release.=C2=A0 It should be considered close to release quality, but may st=
ill<br>
contain unresolved issues.<br>
<br>
You are encouraged to test this version as thoroughly as possible.=C2=A0 Sh=
ould you<br>
encounter any problem, please report it back to the development team using =
the<br>
send-pr(1) utility (requires a working MTA).=C2=A0 If yours is not properly=
 set up,<br>
use the web interface at: <a href=3D"https://www.NetBSD.org/support/send-pr=
.html" rel=3D"noreferrer" target=3D"_blank">https://www.NetBSD.org/support/=
send-pr.html</a><br>
<br>
Thank you for helping us test and improve this NetBSD release candidate.<br=
>
<br>
But scientists, who ought to know<br>
Assure us that it must be so.<br>
Oh, let us never, never doubt<br>
What nobody is sure about.<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -- Hilaire Belloc<b=
r>
hydra-% <br>
---<br>
<br>
Miniroot installtion also works<br>
=C2=A0<a href=3D"https://gist.github.com/tsutsui/00d204d2e96ae45e05bf25ec77=
6891f8" rel=3D"noreferrer" target=3D"_blank">https://gist.github.com/tsutsu=
i/00d204d2e96ae45e05bf25ec776891f8</a><br>
<br>
except two minor bugs:<br>
<br>
- <a href=3D"https://gnats.netbsd.org/54833" rel=3D"noreferrer" target=3D"_=
blank">https://gnats.netbsd.org/54833</a><br>
=C2=A0(miniroot install fails to configure network)<br>
- <a href=3D"https://gnats.netbsd.org/54835" rel=3D"noreferrer" target=3D"_=
blank">https://gnats.netbsd.org/54835</a><br>
=C2=A0(miniroot install.sub uses sh(1) function not enabled with SMAL)<br>
<br>
I&#39;ll commit fixes for these two bugs soon.<br>
<br>
---<br>
Izumi Tsutsui<br>
</blockquote></div><br clear=3D"all"><div><br></div>-- <br><div dir=3D"ltr"=
 class=3D"gmail_signature">Michael Thompson</div>

--000000000000fb29c2059bdfaad9--