Re: 10.0_RC5 at boot on VAX 4000/200

Hi,
 
it is a "CMD CQD-223/M" controller and some Toshiba XM3401B (dua0) + SCSI2SD v3.0 (dua1) connected to it.
 
Greetings, Robert 


> Anders Magnusson <[email protected]> hat am 14.03.2024 10:51 CET geschrieben:
> 
>  
> Robert, is your uda a real KDA or is it something else?
> 
> -- R
> 
> Den 2024-03-14 kl. 10:27, skrev Johnny Billquist:
> > That's an interesting observation, true...
> > The qbus is found, and the ethernet, but no disk controller at all. 
> > And it really should be, based on the output from 3.1.1
> >
> >   Johnny
> >
> > On 2024-03-14 10:21, Anders Magnusson wrote:
> >> It do not find any uda.  Strange.
> >>
> >> -- R
> >>
> >> Den 2024-03-14 kl. 10:14, skrev Johnny Billquist:
> >>> uba? Where did you get that idea from? uba would be a unibus adapter 
> >>> (might also be used for qbus, can't remember), but it's not a disk, 
> >>> and it can't be your root device.
> >>>
> >>> Based on your 3.1.1 system, root device there was ra1. If you are 
> >>> installing from the CD, that looks like it might have been ra0. 
> >>> Which also looks like the device you gave at the boot prompt (DUA0).
> >>>
> >>>   Johnny
> >>>
> >>> On 2024-03-13 20:48, Robert Doerfler wrote:
> >>>> Hi,
> >>>> after using NetBSD 3.1.1 on this VAX 4000/200, I just thought it 
> >>>> would be about time to do a plain reinstall using some cdrom with 
> >>>> NetBSD 10.0 RC5, but at boot it couldn't "find any uba devices":
> >>>>  >>>init
> >>>>  >>>boot dua0
> >>>>  >> NetBSD/vax boot [1.12 (Tue Feb 27 05:27:39 UTC 2024)] <<
> >>>>  >> Press any key to abort autoboot 0
> >>>> getdisklabel: no disk label
> >>>> nfs_open: must mount first.
> >>>> open netbsd.vax: No such file or directory
> >>>>  > boot netbsd
> >>>> getdisklabel: no disk label
> >>>> nfs_open: must mount first.
> >>>> 3557656+185792 [249504+235927]=0x408b20
> >>>> [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 
> >>>> 2002, 2003,
> >>>> [ 1.0000000] 2009, 2010, 2011, 2012, 2013,
> >>>> [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 
> >>>> 2023,
> >>>> [ 1.0000000] 2024
> >>>> [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
> >>>> [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
> >>>> [ 1.0000000] The Regents of the University of California. All 
> >>>> rights reserved.
> >>>> [ 1.0000000] NetBSD 10.0_RC5 (GENERIC) #0: Tue Feb 27 05:27:39 UTC 
> >>>> 2024
> >>>> [ 1.00000/usr/src/sys/arch/vax/compile/GENERIC
> >>>> [ 1.0000000] VAX 4000/200
> >>>> [ 1.0000000] total memory = 40896 KB
> >>>> [ 1.0000000] avail memory = 34952 KB
> >>>> [ 1.0000000] mainbus0 (root)
> >>>> [ 1.0000000] cpu0 at mainbus0: KA660, SOC (ucode rev. 6), 6KB L1 cache
> >>>> [ 1.0000000] ze0 at mainbus0
> >>>> [ 1.0000000] ze0: hardware address 08:00:2b:26:58:fc
> >>>> [ 1.0000000] shac at mainbus0 not configured
> >>>> [ 1.0000000] uba0 at mainbus0: Q22
> >>>> [ 1.0600040] WARNING: system needs entropy for security; see 
> >>>> entropy(7)
> >>>> [ 2.1700040] swwdog0: software watchdog initialized
> >>>> [ 2.1800040] boot device: <unknown>
> >>>> [ 2.1900040] root device:
> >>>> [ 2.2300040] use one of: ze0 ddb halt reboot
> >>>> [ 2.2600040] root device: ^G[A^G^H^Huda0
> >>>> [ 2.4200040] use one of: ze0 ddb halt reboot
> >>>> [ 2.4500040] root device: uba0
> >>>> [ 2.4900040] dump device:
> >>>> [ 2.5100040] file system (default generic):
> >>>> [ 2.5300040] can't determine root device
> >>>> [ 2.5400040] root device:
> >>>> Using NetBSD 3.1.1 dmesg has been:
> >>>> NetBSD 3.1.1 (GENERIC) #0: Thu Jul 12 15:39:27 CEST 2007
> >>>> [email protected]:/home/builds/netbsd-3-1-1-RELEASE/sys/arch/vax/compile/GENERIC 
> >>>>
> >>>> VAX 4000/200
> >>>> cpu0: KA660, microcode Rev. 6
> >>>> total memory = 40896 KB
> >>>> avail memory = 36840 KB
> >>>> mainbus0 (root)
> >>>> ibus0 at mainbus0
> >>>> ze0 at ibus0
> >>>> ze0: hardware address 08:00:2b:26:58:fc
> >>>> device shac at ibus0 not configured
> >>>> uba0 at ibus0: Q22
> >>>> uda0 at uba0 csr 172150 vec 774 ipl 17
> >>>> mscpbus0 at uda0: version 6 model 13
> >>>> mscpbus0: DMA burst size set to 4
> >>>> ra0 at mscpbus0 drive 0: RRD40
> >>>> ra1 at mscpbus0 drive 1: RA90
> >>>> Kernelized RAIDframe activated
> >>>> ra0: no disk label: size 871128 sectors
> >>>> ra1: size 2201599 sectors
> >>>> boot device: ra1
> >>>> root on ra1a dumps on ra1b
> >>>> root file system type: ffs
> >>>> TODR stopped - CHECK AND RESET THE DATE.
> >>>> Any advice whats going wrong?
> >>>>
> >>>> Greetings Robert
> >>>>
> >>>>
> >>>> PS: My first mail on [email protected] 
> >>>> <mailto:[email protected]> ;)
> >>>
> >>
> >