Re: Whats about Cyrix ?

Thanks,

i will try it ;-)

and configuring as a ADSL-Router / Firewall.
I Have a DiscOnChip 8MB (ISA) for booting and a HDD 
as a fileserver planned.



On 27 Jun 2002 at 11:43, Matthew Mondor wrote:

Date sent:      	Thu, 27 Jun 2002 11:43:09 -0400
From:           	Matthew Mondor <[email protected]>
To:             	"Ralf Riedel" <[email protected]>
Copies to:      	[email protected]
Subject:        	Re: Whats about Cyrix ?
Send reply to:  	[email protected]

> On Wed, 3 Jul 2002 19:54:32 +0200
> "Ralf Riedel" <[email protected]> wrote:
> 
> > does NetBSD works on a Cyrix MediaGX 233MHz with the companion Chip
> > CX5530 (National Semiconductors). 
> 
> Here is a dmesg of a system I have here, which has been running for quite
> a while, and very stably despite the cheap architecture:
> 
> NetBSD 1.5.2 (mmondor.gobot) #2: Sun Apr 21 17:38:46 EDT 2002
>     [email protected]:/data/src/sys/arch/i386/compile/mmondor.gobot
> cpu0: Cyrix MMX-enhanced MediaGX (GXm) (586-class), 233.87 MHz
> total memory = 127 MB
> avail memory = 115 MB
> using 1659 buffers containing 6636 KB of memory
> BIOS32 rev. 0 found at 0xfb510
> mainbus0 (root)
> pnpbios0 at mainbus0: nodes 18, max len 78
> com5 at pnpbios0 index 16 (PNP0501)
> com5: io 3f8-3ff, irq 4
> com5: ns16550a, working fifo
> lpt3 at pnpbios0 index 18 (PNP0400)
> lpt3: io 378-37f, irq 7
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled
> pchb0 at pci0 dev 0 function 0
> pchb0: vendor 0x1078 product 0x0001 (rev. 0x00)
> ne2 at pci0 dev 7 function 0: RealTek 8029 Ethernet
> ne2: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto
> ne2: Ethernet address 00:e0:29:4f:36:b9
> ne2: interrupting at irq 10
> vga1 at pci0 dev 8 function 0: vendor 0x1002 product 0x4750 (rev. 0x5c)
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> pcib0 at pci0 dev 18 function 0
> pcib0: vendor 0x1078 product 0x0002 (rev. 0x00)
> isa0 at pcib0
> ne0 at isa0 port 0x280-0x29f irq 9
> ne0: NE2000 Ethernet
> ne0: Ethernet address 00:80:29:64:cb:fa
> pckbc0 at isa0 port 0x60-0x64
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> wdc0 at isa0 port 0x1f0-0x1f7 irq 14
> wd0 at wdc0 channel 0 drive 0: <FUJITSU MPD3043AT>
> wd0: drive supports 16-sector pio transfers, lba addressing
> wd0: 4125 MB, 8940 cyl, 15 head, 63 sec, 512 bytes/sect x 8448300 sectors
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
> wdc1 at isa0 port 0x170-0x177 irq 15
> wd1 at wdc1 channel 0 drive 1: <FUJITSU MPE3064AT>
> wd1: drive supports 16-sector pio transfers, lba addressing
> wd1: 6187 MB, 13410 cyl, 15 head, 63 sec, 512 bytes/sect x 12672450 sectors wd1:
> 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
> pcppi0 at isa0 port 0x61 spkr0 at pcppi0 sysbeep0 at pcppi0 isapnp0 at isa0 port
> 0x279: ISA Plug 'n Play device support npx0 at isa0 port 0xf0-0xff: using
> exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 fd0 at fdc0 drive 0:
> 1.44MB, 80 cyl, 2 head, 18 sec isapnp0: read port 0x203 isapnp0: <CMI8330. Audio
> Adapter, @@@0001, , > port 0x530/8,0x388/8 irq 11 drq 0 not configured isapnp0:
> <CMI8330. Audio Adapter, @H@0001, , > port 0x330/2 irq 9 not configured isapnp0:
> <CMI8330. Audio Adapter, @P@0001, , > port 0x200/8 not configured sb1 at isapnp0
> port 0x220/16 irq 5 drq 1,5 sb1: CMI8330. Audio Adapter : dsp v4.13 audio0 at
> sb1: full duplex, mmap, independent midi0 at sb1: SB MIDI UART opl0 at sb1:
> model OPL3 midi at opl0 not configured biomask e94d netmask ef4d ttymask ffcf
> IPsec: Initialized Security Association Processing. boot device: wd0 root on
> wd0a dumps on wd0b root file system type: ffs
> 
> Sound also works fine.
> 

Ralf Riedel
technical product manager
Met@box AG 
Daimlerring 37
31135 Hildesheim
-Germany-		www.metabox.de