Re: Trouble getting X running

>Given that you have a TGA framebuffer, you should be able to run X by 
>starting it as root with the '-keepPriv' option.

Hi!
Upgraded to 3.8 and now trying:

# X
X: libio is only available on bwx capable machines

# X -keepPriv

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: OpenBSD 3.8 alpha [ELF]
Current Operating System: OpenBSD alphastation.my.domain 3.8
GENERIC#627 alpha
Build Date: 30 September 2005
        Before reporting problems, check http://wiki.X.Org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 28 16:44:15 2005
(==) Using config file: "/etc/X11/xorg.conf"
X: libio is only available on bwx capable machines

OpenBSD 3.8-current (GENERIC) #627: Tue Oct 18 08:03:09 MDT 2005
    [email protected]:/usr/src/sys/arch/alpha/compile/GENERIC
AlphaStation 200 4/166, 166MHz
8192 byte page size, 1 processor.
total memory = 100663296 (98304K)
(2048000 reserved for PROM, 98615296 used by OpenBSD)   
avail memory = 79364096 (77504K)
using 1203 buffers containing 9854976 bytes (9624K) of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21064-0 (pass 2 or 2.1)
apecs0 at mainbus0: DECchip 21071 Core Logic chipset
apecs0: DC21071-CA pass 2, 64-bit memory bus
apecs0: DC21071-DA pass 2
pci0 at apecs0 bus 0
siop0 at pci0 dev 6 function 0 "Symbios Logic 53c810" rev 0x02: isa irq 11
scsibus0 at siop0: 8 targets 
sd0 at scsibus0 targ 0 lun 0: <DEC, RZ29B (C) DEC, 0007> SCSI2 0/direct fixed
sd0: 4091MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sec, 8380080 sec total
sd1 at scsibus0 targ 3 lun 0: <FUJITSU, M2934S-512, 0138> SCSI2 0/direct fixed
sd1: 4153MB, 3421 cyl, 18 head, 138 sec, 512 bytes/sec, 8506782 sec total
cd0 at scsibus0 targ 4 lun 0: <DEC, RRD43 (C) DEC, 1084> SCSI2 5/cdrom removable
sio0 at pci0 dev 7 function 0 "Intel 82378IB ISA" rev 0x03
de0 at pci0 dev 11 function 0 "DEC 21040" rev 0x23: isa irq 5
de0: DEC  pass 2.3 address 08:00:2b:e4:b2:34
de1 at pci0 dev 12 function 0 "DEC 21140" rev 0x22: isa irq 9

de1: DEC DE500-AA  pass 2.2 address 00:00:f8:09:8c:16
tga0 at pci0 dev 13 function 0 "DEC 21030" rev 0x02: DC21030 step B, board type T8-02
tga0: 1280 x 1024, 8bpp, Bt485 RAMDAC
tga0: interrupting at isa irq 10 
wsdisplay0 at tga0 mux 1: console (std, vt100 emulation)
isa0 at sio0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo  
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
isabeep0 at pcppi0
lpt0 at isa0 port 0x3bc/4 irq 7
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70/2: mc146818 or compatible
root on sd0a swap on sd0b
siop0: target 0 now using tagged 8 bit 10.0 MHz 8 REQ/ACK offset xfers
rootdev=0x800 rrootdev=0x800 rawdev=0x802

stray isa irq 4
stray isa irq 3
syncing disks... done
halted.