RE: hang on reboot

> try installing the 3.1 boot loader and making sure you have
> the latest rev of firmware from soren...
>
> The 3.1 boot loader seems to play nicer

Guys....I'll apologize up-front for being the Moron Of the Year...but I've
really monkey'ed by system up.  Was having this same ReBoot problem -
downloaded the 3.1 BootEasy program
(ftp://ftp.openbsd.org/OpenBSD/3.1/tools/booteasy/Boot.bin ) and issued
(according to the FAQ) the following to reinitilize the MBR:

fdisk -i -f /root/Boot.bin wd0

no errors...but when I reboot, I get the following:

Soekris Engineering net4501               CPU 80486 134 Mhz

0064 Mbyte Memory

Primary   Master Micron MTCF032A                         31 Mbyte

PXE-M00: BootManage UNDI, PXE-2.0 (build 082)

Slot Vend Dev  ClassRev Cmd  Stat CL LT HT  Base1    Base2   Int
-----------------------------------------------------------------
0:00 1022 3000 06000000 0006 2280 00 00 00 00000000 00000000 00
0:18 100B 0020 02000000 0107 0290 00 3F 00 0000E001 A0000000 10
0:19 100B 0020 02000000 0107 0290 00 3F 00 0000E101 A0001000 11
0:20 100B 0020 02000000 0107 0290 00 3F 00 0000E201 A0002000 05

 1 Seconds to automatic boot.   Press Ctrl-P for entering Monitor.

F4 . . . ??

Default: F?



But the machine now seems to be LOCKED?!?!  I've tried two different
terminal softwares to see if it was a problem with the term program NOT
being able to transmit a F4...no luck...any advice?  It seem I'll have to
connect the CF to an OpenBSD machine and redo - any advice on which CF
connection to get?

Thanks again - Dave