Re: HP 9000 K200 (819) ...
Rob Sciuk <[email protected]> Tue, 11 Dec 2007 15:24:40 -0500 (EST)
| Newsgroups | gmane.os.openbsd.hppa |
|---|---|
| Message-ID | <[email protected]> |
On Tue, 11 Dec 2007, Mark Kettenis wrote: > Date: Tue, 11 Dec 2007 11:31:48 +0100 (CET) > From: Mark Kettenis <[email protected]> > To: [email protected] > Cc: [email protected] > Subject: Re: HP 9000 K200 (819) ... > >> Date: Mon, 10 Dec 2007 13:15:13 -0500 (EST) >> From: Rob Sciuk <[email protected]> > >> SPID bits: 0x0, error = -2 >> pdc_coproc: 0xc0, 0xc0; model b rev 1 >> [ bsd ELF symbol table not valid: symtab unaligned ] >> [ no symbol table formats found ] >> Copyright (c) 1982, 1986, 1989, 1991, 1993 >> The Regents of the University of California. All rights reserved. >> Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://www.OpenBSD.org >> >> OpenBSD 4.2-current (RAMDISK) #546: Sun Nov 18 15:16:08 MST 2007 >> [email protected]:/usr/src/sys/arch/hppa/compile/RAMDISK >> HP 9000/819/K200 (KittyHawk DC2 100) PA-RISC 1.1a >> real mem = 536870912 (524288 reserved for PROM, 8269824 used by OpenBSD) >> avail mem = 517582848 >> mainbus0 at root [flex fff80000] >> pdc0 at mainbus0 >> power0 at mainbus0: not available >> biomask 0x3 netmask 0x3 ttymask 0x13 >> bootpath: 10/12/5.2 class=1 flags=0 hpa=0xffd06000 spa=0x0 io=0xc000 >> rd0: fixed, 5120 blocks >> root on rd0a swap on rd0b dump on rd0b >> WARNING: clock gained 21 days -- CHECK AND RESET THE DATE! > > Hmm, I'm sure that machine has more hardware devices than this dmesg shows ;) > > Looks like device enumeration simply fails on your machine. I vaguely > remember seeing some Linux code that had some workarounds for firmware > calls for the KittyHawk. I'll see if I can come up with a diff. > > Meanwhile, could you try a verbose boot? Say Y to the "Interact with > IPL?" question, then at the OpenBSD bootloader prompt type "boot -c > bsd.rd", and at the UKC> prompt say "verbose" and "quit". > > Thanks, > Mark, How does one get OpenBSD to prompt at the bootloader? I've tried hitting space and a few other keys, but this apparently had no effect, and the boot just proceeded on without me ... and as for the UKC> prompt ... I never saw it ... Cheers, Rob.