Re: trouble with IPv6-in-ipv4 tunnel configuration

I checked the rc.conf, in which 'pf=NO ',  So what's the possible problem here? 


--
Hui Wang
InfoNet Lab,USTC
http://if.ustc.edu.cn/~hwang
----- Original Message ----- 
From: "Thorsten Glaser" <[email protected]>
To: "Wang Hui" <[email protected]>
Cc: <[email protected]>; "zhubin" <[email protected]>
Sent: Tuesday, March 23, 2004 3:03 AM
Subject: Re: trouble with IPv6-in-ipv4 tunnel configuration 


Dixitur illum [email protected] scribere...

>Hi, Thorsten, I made the configuration according to your suggestion. But
>it still failed. Very strange. I used tcpdump to catch the packets in
>the device and found that: (1) on fxp0 there were ping icmp echo request
>and reply packets (encap), but (2) on gif0 there ware only ping icmp
>request packets, the reply packets all lost! very strange. I guess there
>was something wrong with my protocol stack configuration. or tunnel
>configuration? I am using OpenBSD3.4.

Disable pf.

//Thorsten
-- 
Solange man keine schmutzigen Tricks macht, und ich meine *wirklich*
schmutzige Tricks, wie bei einer doppelt verketteten Liste beide
Pointer XORen und in nur einem Word speichern, funktioniert Boehm ganz
hervorragend. -- Andreas Bogk über boehm-gc in d.a.s.r