Re: Kernel Panic - but not on bsd.rd
Mike Marcott <[email protected]> Mon, 15 Jun 2026 21:34:31 -0500
| Newsgroups | gmane.os.openbsd.misc |
|---|---|
| Message-ID | <[email protected]> |
On 6/15/26 11:08, Mike Larkin wrote: > On Mon, Jun 15, 2026 at 05:41:33AM -0500, Mike Marcott wrote: >> Mike - Mach mem output from 7.8 RELEASE attached. I’m at a loss on how to >> pause to show the missing output. Also on how to get access to the actual >> text instead of a picture - no serial port. Hopefully this helps. >> Also 7.8 RELEASE installs, reboots, and runs fine the first few times. Now >> it's doing the same thing. >> >> Link to mach mem from 7.8 RELEASE picture here. >> https://share.icloud.com/photos/08cjbhT4-GYx649ZygJAAXemg >> >> >> Also, here's a link to the 7.8 RELEASE version of the kernel panic >> https://share.icloud.com/photos/0a0Yh8ei3WYI9st_F3bti6FPg >> >> Let me know if these links don't work or you need something else. Thank >> you! >> > > This looks truncated (starts at region 4). > > When this happens I usually take a slow-mo video on my phone and then replay. > > Can you provide the missing regions that way? > > Alternately, you may be able to increase the resolution by > > boot> machine gop > > -ml Mike - Note this is for 7.8 RELEASE (https://share.icloud.com/photos/0a0Yh8ei3WYI9st_F3bti6FPg) Link to full version of machine mem starting with Region 0. https://share.icloud.com/photos/005ZRfcSp5HZXk7t5YgK4C1_Q Thank you MM > >> >>> On Jun 14, 2026, at 11:27 AM, Mike Larkin <[email protected]> wrote: >>> >>> On Sun, Jun 14, 2026 at 09:53:12AM -0500, Mike Marcott wrote: >>>> Hi, >>>> >>>> Installing 7.9 (current or release) on the following system completes >>>> successfully but on reboot it kernel panics immediately. A typed out >>>> version of it is below (please excuse any typos, I tried...) >>>> >>>> Internal NVME disk is encrypted, after entering the passphrase the system >>>> displays the boot> prompt as normal. Entering nothing leads to kernel >>>> panic. Entering bsd or bsd.sp will also lead to the panic, but entering >>>> bsd.rd will boot to the ramdisk installer fine. Dmesg below is from the >>>> bsd.rd installer. >>>> >>>> I'm not able to type anything into the ddb{0}> prompt. Keyboard doesn't >>>> work. Only can press power button to power off system. >>>> >>>> Note the system had 7.8 CURRENT on it and I did a sysupgrade which lead to >>>> the issues noted. Also note the 7.8 CURRENT was a fresh install from around >>>> January and I hadn't yet starting configuring the machine instead using my >>>> other desktop. I have not tried a 7.8 install again. >>>> >>>> I'm wondering what I have to do to get this system to work? Why does the >>>> bsd.rd work while the installed bsd doesn't? >>>> >>>> System specs >>>> AMD Ryzen 9 5950X >>>> ASUS ROG STRIX B550-F GAMING WIFI II >>>> 64 GB RAM >>>> Graphics card installed is AMD FirePro W4300 (only card I have lying around) >>>> Also have a iwx intel 210 wireless card as onboard wireless is not supported >>>> >>>> dmesg here: >>>> https://dmesgd.nycbug.org/dmesgd?do=view&id=9007 >>>> >>>> dmesg also below and attached. >>>> >>>> Thank you! >>>> Mike >>>> >>> >>> can you show the output of "mach mem" from the boot> prompt? >>> >>>> [ using 4947304 bytes of bsd ELF symbol table ] >>>> Copyright (c) 1982, 1986, 1989, 1991, 1993 >>>> The Regents of the University of California. All rights reserved. >>>> Copyright (C) 1995-2826 OpenBSD. All rights reserved. >>>> https://www.OpenBSD.org >>>> >>>> panic: kernel diagnostic assertion "atop(VM_PAGE_TO_PHYS(&pg[i])) == >>>> atop(VM_PAGE_TO_PHYS(pg)) + i" failed: file "/usr/ >>>> src/sys/uvm/uvm_pmemrange.c", Line 1316 >>>> Stopped at db_enter+0x14: popq %rgp >>>> TID PID UID PRFLAGS PFLAGS CPU COMMAND >>>> CPU COMMAND >>>> db_enter(10, ffffffff83135d40,282, 8, ffffffff8185af94, ffffffff83135d40) at >>>> db_enter+0x14 >>>> panic(ffffffff826a4d85, ffffffff826a4d85, fffff40100016000, eb35ce, >>>> ffffffff82ad6c77, ffffffff83135d50) at panic+0xd5 >>>> __assert(ffffffff826e0978, ffffffff8265b0fe,524, ffffffff826c4145, >>>> ffffffff812efe69, ffffffff83135df0) at _assert+0x29 >>>> uvm_pr_freepages(fffff40100016000, eb35ce, c69ad, eb35ce, 17bd12,0) at >>>> uvm_pmr_freepages+0x34f >>>> uvm_page_init(ffffffff83135ee8, ffffffff83135ef0,f12e1d7450ed3ebe, >>>> 8,1001000, bfff50) at uvm_page_init+0x1f6 >>>> uum_init(672615f6a3c88733,8,1001000, ffffffff83135f10, ffffffff82baa680,28) >>>> at uvm_init+0x42 >>>> main(0.0.1001000,1, ffffffff81e2bbf0, ffffffff83135f40) at main+0x90 >>>> end trace frame: 0x0, count: 8 >>>> https://www.openbsd.org/ddb.html describes the minimum info required in bug >>>> Insufficient info makes it difficult to find and fix bugs. >>>> ddb{0}> >>>> >>>> >>>> >>>> >>>> and here: >>>> >>>> OpenBSD 7.9 (RAMDISK_CD) #396: Wed May 6 13:25:05 MDT 2026 >>>> [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD >>>> real mem = 68567973888 (65391MB) >>>> avail mem = 66482925568 (63403MB) >>>> random: good seed from bootblocks >>>> mainbus0 at root >>>> bios0 at mainbus0: SMBIOS rev. 3.3 @ 0xcb7ec000 (76 entries) >>>> bios0: vendor American Megatrends Inc. version "3634" date 09/10/2025 >>>> bios0: ASUS ROG STRIX B550-F GAMING WIFI II >>>> efi0 at bios0: UEFI 2.7 >>>> efi0: American Megatrends rev 0x50011 >>>> acpi0 at bios0: ACPI 6.2 >>>> acpi0: tables DSDT FACP SSDT SSDT SSDT FIDT MCFG HPET IVRS VFCT WPBT TPM2 >>>> PCCT SSDT CRAT CDIT SSDT SSDT SSDT SSDT WSMT APIC SSDT SSDT FPDT >>>> acpitimer0 at acpi0: 3579545 Hz, 32 bits >>>> acpihpet0 at acpi0: 14318180 Hz >>>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >>>> cpu0 at mainbus0: apid 0 (boot processor) >>>> cpu0: AMD Ryzen 9 5950X 16-Core Processor, 3400.00 MHz, 19-21-02, patch >>>> 0a201213 >>>> cpu0: cpuid 1 edx=178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT> ecx=76f8320b<SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND> >>>> cpu0: cpuid 6 eax=4<ARAT> ecx=1<EFFFREQ> >>>> cpu0: cpuid 7.0 ebx=219c97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> >>>> ecx=40068c<UMIP,PKU> edx=10 >>>> cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES> >>>> cpu0: cpuid 80000001 edx=2fd3fbff<NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG> ecx=75c237ff<LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TCE,TOPEXT,CPCTR,DBKP,PCTRL3,MWAITX> >>>> cpu0: cpuid 80000007 edx=6799<HWPSTATE,ITSC> >>>> cpu0: cpuid 80000008 >>>> ebx=111ef657<IBPB,IBRS,STIBP,STIBP_ALL,IBRS_PREF,IBRS_SM,SSBD> >>>> cpu0: cpuid 8000001F >>>> eax=1780f<SME,SEV,PFLUSH_MSR,SEVES,REQ64BITHOST,RESTINJ,ALTINJ,DBGSTSW,VTE> >>>> ecx=1fd edx=1 >>>> cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 512KB >>>> 64b/line 8-way L2 cache, 32MB 64b/line 16-way L3 cache >>>> cpu0: apic clock running at 100MHz >>>> cpu0: mwait min=64, max=64, C-substates=1.1, IBE >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> ioapic0 at mainbus0: apid 33 pa 0xfec00000, version 21, 24 pins, can't remap >>>> ioapic1 at mainbus0: apid 34 pa 0xfec01000, version 21, 32 pins, can't remap >>>> acpiprt0 at acpi0: bus 0 (PCI0) >>>> acpiprt1 at acpi0: bus 10 (GP12) >>>> acpiprt2 at acpi0: bus 11 (GP13) >>>> acpiprt3 at acpi0: bus -1 (GP30) >>>> acpiprt4 at acpi0: bus -1 (GP31) >>>> acpiprt5 at acpi0: bus 1 (GPP0) >>>> acpiprt6 at acpi0: bus -1 (GPP2) >>>> acpiprt7 at acpi0: bus -1 (GPP3) >>>> acpiprt8 at acpi0: bus -1 (GPP4) >>>> acpiprt9 at acpi0: bus -1 (GPP5) >>>> acpiprt10 at acpi0: bus -1 (GPP6) >>>> acpiprt11 at acpi0: bus -1 (GPP7) >>>> acpiprt12 at acpi0: bus 9 (GPP8) >>>> acpiprt13 at acpi0: bus -1 (GPP9) >>>> acpiprt14 at acpi0: bus -1 (GPPA) >>>> acpiprt15 at acpi0: bus -1 (GPPB) >>>> acpiprt16 at acpi0: bus -1 (GPPC) >>>> acpiprt17 at acpi0: bus -1 (GPPD) >>>> acpiprt18 at acpi0: bus -1 (GPPE) >>>> acpiprt19 at acpi0: bus -1 (GPPF) >>>> acpiprt20 at acpi0: bus -1 (GP10) >>>> acpiprt21 at acpi0: bus 2 (GPP1) >>>> acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000 >>>> acpicmos0 at acpi0 >>>> "PNP0C0C" at acpi0 not configured >>>> amdgpio0 at acpi0 GPIO uid 0 addr 0xfed81500/0x400 irq 7, 184 pins >>>> dwiic0 at acpi0 I2CD addr 0xfedc5000/0x1000 irq 6 >>>> iic0 at dwiic0 >>>> "MSFT0101" at acpi0 not configured >>>> "PNP0C14" at acpi0 not configured >>>> "ACPI0010" at acpi0 not configured >>>> "AMDIF030" at acpi0 not configured >>>> "PNP0C14" at acpi0 not configured >>>> "PNP0C14" at acpi0 not configured >>>> "PNP0C14" at acpi0 not configured >>>> "PNP0C14" at acpi0 not configured >>>> pci0 at mainbus0 bus 0 >>>> pchb0 at pci0 dev 0 function 0 "AMD 17h Root Complex" rev 0x00 >>>> "AMD 17h IOMMU" rev 0x00 at pci0 dev 0 function 2 not configured >>>> pchb1 at pci0 dev 1 function 0 "AMD 17h Host" rev 0x00 >>>> ppb0 at pci0 dev 1 function 1 "AMD 17h PCIE" rev 0x00: msi >>>> pci1 at ppb0 bus 1 >>>> nvme0 at pci1 dev 0 function 0 "Crucial P310" rev 0x01: msix, NVMe 2.0 >>>> nvme0: CT500P310SSD8, firmware VACR001, serial 25164FA6A1F7 >>>> scsibus0 at nvme0: 2 targets, initiator 0 >>>> sd0 at scsibus0 targ 1 lun 0: <NVMe, CT500P310SSD8, VACR> >>>> sd0: 476940MB, 512 bytes/sector, 976773168 sectors >>>> ppb1 at pci0 dev 1 function 2 "AMD 17h PCIE" rev 0x00: msi >>>> pci2 at ppb1 bus 2 >>>> xhci0 at pci2 dev 0 function 0 "AMD 500 Series xHCI" rev 0x00: msix, xHCI >>>> 1.10 >>>> usb0 at xhci0: USB revision 3.0 >>>> uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00 >>>> addr 1 >>>> ahci0 at pci2 dev 0 function 1 "AMD 500 Series AHCI" rev 0x00: msi, AHCI >>>> 1.3.1 >>>> scsibus1 at ahci0: 32 targets >>>> ppb2 at pci2 dev 0 function 2 "AMD 500 Series PCIE" rev 0x00 >>>> pci3 at ppb2 bus 3 >>>> ppb3 at pci3 dev 0 function 0 "AMD 500 Series PCIE" rev 0x00: msi >>>> pci4 at ppb3 bus 4 >>>> ppb4 at pci3 dev 1 function 0 "AMD 500 Series PCIE" rev 0x00: msi >>>> pci5 at ppb4 bus 5 >>>> ppb5 at pci3 dev 2 function 0 "AMD 500 Series PCIE" rev 0x00: msi >>>> pci6 at ppb5 bus 6 >>>> iwx0 at pci6 dev 0 function 0 "Intel Wi-Fi 6 AX210" rev 0x1a, msix >>>> ppb6 at pci3 dev 3 function 0 "AMD 500 Series PCIE" rev 0x00: msi >>>> pci7 at ppb6 bus 7 >>>> ppb7 at pci3 dev 9 function 0 "AMD 500 Series PCIE" rev 0x00: msi >>>> pci8 at ppb7 bus 8 >>>> igc0 at pci8 dev 0 function 0 "Intel I226-V" rev 0x06, msix, 1 queue, >>>> address [_MAC_XXXXXXXXXX] >>>> pchb2 at pci0 dev 2 function 0 "AMD 17h Host" rev 0x00 >>>> pchb3 at pci0 dev 3 function 0 "AMD 17h Host" rev 0x00 >>>> ppb8 at pci0 dev 3 function 1 "AMD 17h PCIE" rev 0x00: msi >>>> pci9 at ppb8 bus 9 >>>> "ATI Bonaire" rev 0x00 at pci9 dev 0 function 0 not configured >>>> vendor "ATI", unknown product 0xaac0 (class multimedia subclass hdaudio, rev >>>> 0x00) at pci9 dev 0 function 1 not configured >>>> pchb4 at pci0 dev 4 function 0 "AMD 17h Host" rev 0x00 >>>> pchb5 at pci0 dev 5 function 0 "AMD 17h Host" rev 0x00 >>>> pchb6 at pci0 dev 7 function 0 "AMD 17h Host" rev 0x00 >>>> ppb9 at pci0 dev 7 function 1 "AMD 17h PCIE" rev 0x00 >>>> pci10 at ppb9 bus 10 >>>> vendor "AMD", unknown product 0x148a (class instrumentation unknown subclass >>>> 0x00, rev 0x00) at pci10 dev 0 function 0 not configured >>>> pchb7 at pci0 dev 8 function 0 "AMD 17h Host" rev 0x00 >>>> ppb10 at pci0 dev 8 function 1 "AMD 17h PCIE" rev 0x00 >>>> pci11 at ppb10 bus 11 >>>> vendor "AMD", unknown product 0x1485 (class instrumentation unknown subclass >>>> 0x00, rev 0x00) at pci11 dev 0 function 0 not configured >>>> ccp0 at pci11 dev 0 function 1 "AMD 17h Crypto" rev 0x00 >>>> xhci1 at pci11 dev 0 function 3 "AMD 17h xHCI" rev 0x00: msix, xHCI 1.10 >>>> usb1 at xhci1: USB revision 3.0 >>>> uhub1 at usb1 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00 >>>> addr 1 >>>> "AMD 17h HD Audio" rev 0x00 at pci11 dev 0 function 4 not configured >>>> "AMD FCH SMBus" rev 0x61 at pci0 dev 20 function 0 not configured >>>> "AMD FCH LPC" rev 0x51 at pci0 dev 20 function 3 not configured >>>> pchb8 at pci0 dev 24 function 0 "AMD 17h Data Fabric" rev 0x00 >>>> pchb9 at pci0 dev 24 function 1 "AMD 17h Data Fabric" rev 0x00 >>>> pchb10 at pci0 dev 24 function 2 "AMD 17h Data Fabric" rev 0x00 >>>> pchb11 at pci0 dev 24 function 3 "AMD 17h Data Fabric" rev 0x00 >>>> pchb12 at pci0 dev 24 function 4 "AMD 17h Data Fabric" rev 0x00 >>>> pchb13 at pci0 dev 24 function 5 "AMD 17h Data Fabric" rev 0x00 >>>> pchb14 at pci0 dev 24 function 6 "AMD 17h Data Fabric" rev 0x00 >>>> pchb15 at pci0 dev 24 function 7 "AMD 17h Data Fabric" rev 0x00 >>>> isa0 at mainbus0 >>>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo >>>> pckbc0 at isa0 port 0x60/5 irq 1 irq 12 >>>> pckbd0 at pckbc0 (kbd slot) >>>> wskbd0 at pckbd0: console keyboard >>>> efifb0 at mainbus0: 1920x1200, 32bpp >>>> wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 >>>> umass0 at uhub0 port 8 configuration 1 interface 0 "vendor 0x13fe Patriot >>>> Memory" rev 2.00/1.00 addr 2 >>>> umass0: using SCSI over Bulk-Only >>>> scsibus2 at umass0: 2 targets, initiator 0 >>>> sd1 at scsibus2 targ 1 lun 0: <, Patriot Memory, PMAP> removable >>>> serial.13fe3e00070157349FF9 >>>> sd1: 7640MB, 512 bytes/sector, 15646720 sectors >>>> uhidev0 at uhub0 port 10 configuration 1 interface 2 "AsusTek Computer Inc. >>>> AURA LED Controller" rev 2.00/1.00 addr 3 >>>> uhidev0: iclass 3/0 >>>> "AsusTek Computer Inc. AURA LED Controller" rev 2.00/1.00 addr 3 at uhub0 >>>> port 10 configuration 1 not configured >>>> uhub2 at uhub0 port 11 configuration 1 interface 0 "vendor 0x05e3 USB2.0 >>>> Hub" rev 2.00/60.70 addr 4 >>>> uhidev1 at uhub0 port 13 configuration 1 interface 0 "Keychron Keychron C2" >>>> rev 2.00/1.04 addr 5 >>>> uhidev1: iclass 3/1 >>>> ukbd0 at uhidev1 >>>> wskbd1 at ukbd0 mux 1 >>>> wskbd1: connecting to wsdisplay0 >>>> uhidev2 at uhub0 port 13 configuration 1 interface 1 "Keychron Keychron C2" >>>> rev 2.00/1.04 addr 5 >>>> uhidev2: iclass 3/1, 3 report ids >>>> ukbd1 at uhidev2 reportid 1 >>>> wskbd2 at ukbd1 mux 1 >>>> wskbd2: connecting to wsdisplay0 >>>> uhid at uhidev2 reportid 2 not configured >>>> uhid at uhidev2 reportid 3 not configured >>>> uhidev3 at uhub1 port 1 configuration 1 interface 0 "Logitech USB Receiver" >>>> rev 2.00/5.03 addr 2 >>>> uhidev3: iclass 3/1 >>>> ukbd2 at uhidev3 >>>> wskbd3 at ukbd2 mux 1 >>>> wskbd3: connecting to wsdisplay0 >>>> uhidev4 at uhub1 port 1 configuration 1 interface 1 "Logitech USB Receiver" >>>> rev 2.00/5.03 addr 2 >>>> uhidev4: iclass 3/1, 11 report ids >>>> uhid at uhidev4 reportid 2 not configured >>>> uhid at uhidev4 reportid 3 not configured >>>> uhid at uhidev4 reportid 4 not configured >>>> uhid at uhidev4 reportid 11 not configured >>>> uhidev5 at uhub1 port 1 configuration 1 interface 2 "Logitech USB Receiver" >>>> rev 2.00/5.03 addr 2 >>>> uhidev5: iclass 3/0, 17 report ids >>>> uhid at uhidev5 reportid 16 not configured >>>> uhid at uhidev5 reportid 17 not configured >>>> uhidev6 at uhub1 port 1 configuration 1 interface 3 "Logitech USB Receiver" >>>> rev 2.00/5.03 addr 2 >>>> uhidev6: iclass 3/0, 42 report ids >>>> uhid at uhidev6 reportid 40 not configured >>>> uhid at uhidev6 reportid 41 not configured >>>> uhid at uhidev6 reportid 42 not configured >>>> softraid0 at root >>>> scsibus3 at softraid0: 256 targets >>>> sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> >>>> sd2: 476679MB, 512 bytes/sector, 976240063 sectors >>>> root on rd0a swap on rd0b dump on rd0b >>>> WARNING: CHECK AND RESET THE DATE! >>>> iwx0: could not read firmware iwx-ty-a0-gf-a0-77 (error 2) >>>> iwx0: failed to load init firmware >>> >>>> Kernel panic north >>>> L using 4947304 bytes of bsd ELF symbol table ] >>>> Copyright (c) 1982, 1986, 1989, 1991, 1993 >>>> The Regents of the University of California. All rights reserved. o CaLifornia, >>>> Copyright (C) 1995-2826 OpenBSD. All rights reserved. https://www.OpenBSD.org >>>> >>>> panic: kernel diagnostic assertion "atop(VM_PAGE_TO_PHYS(&pg[i])) == atop(VM_PAGE_TO_PHYS(pg)) + i" failed: file "/usr/ >>>> src/sys/uvm/uvm_pmemrange.c", Line 1316 >>>> Stopped at db_enter+0x14: popq %rgp >>>> TID PID UID PRFLAGS PFLAGS CPU COMMAND >>>> CPU COMMAND >>>> db_enter(10, ffffffff83135d40,282, 8, ffffffff8185af94, ffffffff83135d40) at db_enter+0x14 >>>> panic(ffffffff826a4d85, ffffffff826a4d85, fffff40100016000, eb35ce, ffffffff82ad6c77, ffffffff83135d50) at panic+0xd5 >>>> __assert(ffffffff826e0978, ffffffff8265b0fe,524, ffffffff826c4145, ffffffff812efe69, ffffffff83135df0) at _assert+0x29 >>>> uvm_pr_freepages(fffff40100016000, eb35ce, c69ad, eb35ce, 17bd12,0) at uvm_pmr_freepages+0x34f >>>> uvm_page_init(ffffffff83135ee8, ffffffff83135ef0,f12e1d7450ed3ebe, 8,1001000, bfff50) at uvm_page_init+0x1f6 >>>> uum_init(672615f6a3c88733,8,1001000, ffffffff83135f10, ffffffff82baa680,28) at uvm_init+0x42 >>>> main(0.0.1001000,1, ffffffff81e2bbf0, ffffffff83135f40) at main+0x90 >>>> end trace frame: 0x0, count: 8 >>>> https://www.openbsd.org/ddb.html describes the minimum info required in bug >>>> Insufficient info makes it difficult to find and fix bugs. >>>> ddb{0}> >>> >>>> OpenBSD 7.9 (RAMDISK_CD) #396: Wed May 6 13:25:05 MDT 2026 >>>> [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD >>>> real mem = 68567973888 (65391MB) >>>> avail mem = 66482925568 (63403MB) >>>> random: good seed from bootblocks >>>> mainbus0 at root >>>> bios0 at mainbus0: SMBIOS rev. 3.3 @ 0xcb7ec000 (76 entries) >>>> bios0: vendor American Megatrends Inc. version "3634" date 09/10/2025 >>>> bios0: ASUS ROG STRIX B550-F GAMING WIFI II >>>> efi0 at bios0: UEFI 2.7 >>>> efi0: American Megatrends rev 0x50011 >>>> acpi0 at bios0: ACPI 6.2 >>>> acpi0: tables DSDT FACP SSDT SSDT SSDT FIDT MCFG HPET IVRS VFCT WPBT TPM2 PCCT SSDT CRAT CDIT SSDT SSDT SSDT SSDT WSMT APIC SSDT SSDT FPDT >>>> acpitimer0 at acpi0: 3579545 Hz, 32 bits >>>> acpihpet0 at acpi0: 14318180 Hz >>>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >>>> cpu0 at mainbus0: apid 0 (boot processor) >>>> cpu0: AMD Ryzen 9 5950X 16-Core Processor, 3400.00 MHz, 19-21-02, patch 0a201213 >>>> cpu0: cpuid 1 edx=178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT> ecx=76f8320b<SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND> >>>> cpu0: cpuid 6 eax=4<ARAT> ecx=1<EFFFREQ> >>>> cpu0: cpuid 7.0 ebx=219c97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> ecx=40068c<UMIP,PKU> edx=10 >>>> cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES> >>>> cpu0: cpuid 80000001 edx=2fd3fbff<NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG> ecx=75c237ff<LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TCE,TOPEXT,CPCTR,DBKP,PCTRL3,MWAITX> >>>> cpu0: cpuid 80000007 edx=6799<HWPSTATE,ITSC> >>>> cpu0: cpuid 80000008 ebx=111ef657<IBPB,IBRS,STIBP,STIBP_ALL,IBRS_PREF,IBRS_SM,SSBD> >>>> cpu0: cpuid 8000001F eax=1780f<SME,SEV,PFLUSH_MSR,SEVES,REQ64BITHOST,RESTINJ,ALTINJ,DBGSTSW,VTE> ecx=1fd edx=1 >>>> cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 512KB 64b/line 8-way L2 cache, 32MB 64b/line 16-way L3 cache >>>> cpu0: apic clock running at 100MHz >>>> cpu0: mwait min=64, max=64, C-substates=1.1, IBE >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> cpu at mainbus0: not configured >>>> ioapic0 at mainbus0: apid 33 pa 0xfec00000, version 21, 24 pins, can't remap >>>> ioapic1 at mainbus0: apid 34 pa 0xfec01000, version 21, 32 pins, can't remap >>>> acpiprt0 at acpi0: bus 0 (PCI0) >>>> acpiprt1 at acpi0: bus 10 (GP12) >>>> acpiprt2 at acpi0: bus 11 (GP13) >>>> acpiprt3 at acpi0: bus -1 (GP30) >>>> acpiprt4 at acpi0: bus -1 (GP31) >>>> acpiprt5 at acpi0: bus 1 (GPP0) >>>> acpiprt6 at acpi0: bus -1 (GPP2) >>>> acpiprt7 at acpi0: bus -1 (GPP3) >>>> acpiprt8 at acpi0: bus -1 (GPP4) >>>> acpiprt9 at acpi0: bus -1 (GPP5) >>>> acpiprt10 at acpi0: bus -1 (GPP6) >>>> acpiprt11 at acpi0: bus -1 (GPP7) >>>> acpiprt12 at acpi0: bus 9 (GPP8) >>>> acpiprt13 at acpi0: bus -1 (GPP9) >>>> acpiprt14 at acpi0: bus -1 (GPPA) >>>> acpiprt15 at acpi0: bus -1 (GPPB) >>>> acpiprt16 at acpi0: bus -1 (GPPC) >>>> acpiprt17 at acpi0: bus -1 (GPPD) >>>> acpiprt18 at acpi0: bus -1 (GPPE) >>>> acpiprt19 at acpi0: bus -1 (GPPF) >>>> acpiprt20 at acpi0: bus -1 (GP10) >>>> acpiprt21 at acpi0: bus 2 (GPP1) >>>> acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000 >>>> acpicmos0 at acpi0 >>>> "PNP0C0C" at acpi0 not configured >>>> amdgpio0 at acpi0 GPIO uid 0 addr 0xfed81500/0x400 irq 7, 184 pins >>>> dwiic0 at acpi0 I2CD addr 0xfedc5000/0x1000 irq 6 >>>> iic0 at dwiic0 >>>> "MSFT0101" at acpi0 not configured >>>> "PNP0C14" at acpi0 not configured >>>> "ACPI0010" at acpi0 not configured >>>> "AMDIF030" at acpi0 not configured >>>> "PNP0C14" at acpi0 not configured >>>> "PNP0C14" at acpi0 not configured >>>> "PNP0C14" at acpi0 not configured >>>> "PNP0C14" at acpi0 not configured >>>> pci0 at mainbus0 bus 0 >>>> pchb0 at pci0 dev 0 function 0 "AMD 17h Root Complex" rev 0x00 >>>> "AMD 17h IOMMU" rev 0x00 at pci0 dev 0 function 2 not configured >>>> pchb1 at pci0 dev 1 function 0 "AMD 17h Host" rev 0x00 >>>> ppb0 at pci0 dev 1 function 1 "AMD 17h PCIE" rev 0x00: msi >>>> pci1 at ppb0 bus 1 >>>> nvme0 at pci1 dev 0 function 0 "Crucial P310" rev 0x01: msix, NVMe 2.0 >>>> nvme0: CT500P310SSD8, firmware VACR001, serial 25164FA6A1F7 >>>> scsibus0 at nvme0: 2 targets, initiator 0 >>>> sd0 at scsibus0 targ 1 lun 0: <NVMe, CT500P310SSD8, VACR> >>>> sd0: 476940MB, 512 bytes/sector, 976773168 sectors >>>> ppb1 at pci0 dev 1 function 2 "AMD 17h PCIE" rev 0x00: msi >>>> pci2 at ppb1 bus 2 >>>> xhci0 at pci2 dev 0 function 0 "AMD 500 Series xHCI" rev 0x00: msix, xHCI 1.10 >>>> usb0 at xhci0: USB revision 3.0 >>>> uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00 addr 1 >>>> ahci0 at pci2 dev 0 function 1 "AMD 500 Series AHCI" rev 0x00: msi, AHCI 1.3.1 >>>> scsibus1 at ahci0: 32 targets >>>> ppb2 at pci2 dev 0 function 2 "AMD 500 Series PCIE" rev 0x00 >>>> pci3 at ppb2 bus 3 >>>> ppb3 at pci3 dev 0 function 0 "AMD 500 Series PCIE" rev 0x00: msi >>>> pci4 at ppb3 bus 4 >>>> ppb4 at pci3 dev 1 function 0 "AMD 500 Series PCIE" rev 0x00: msi >>>> pci5 at ppb4 bus 5 >>>> ppb5 at pci3 dev 2 function 0 "AMD 500 Series PCIE" rev 0x00: msi >>>> pci6 at ppb5 bus 6 >>>> iwx0 at pci6 dev 0 function 0 "Intel Wi-Fi 6 AX210" rev 0x1a, msix >>>> ppb6 at pci3 dev 3 function 0 "AMD 500 Series PCIE" rev 0x00: msi >>>> pci7 at ppb6 bus 7 >>>> ppb7 at pci3 dev 9 function 0 "AMD 500 Series PCIE" rev 0x00: msi >>>> pci8 at ppb7 bus 8 >>>> igc0 at pci8 dev 0 function 0 "Intel I226-V" rev 0x06, msix, 1 queue, address [_MAC_XXXXXXXXXX] >>>> pchb2 at pci0 dev 2 function 0 "AMD 17h Host" rev 0x00 >>>> pchb3 at pci0 dev 3 function 0 "AMD 17h Host" rev 0x00 >>>> ppb8 at pci0 dev 3 function 1 "AMD 17h PCIE" rev 0x00: msi >>>> pci9 at ppb8 bus 9 >>>> "ATI Bonaire" rev 0x00 at pci9 dev 0 function 0 not configured >>>> vendor "ATI", unknown product 0xaac0 (class multimedia subclass hdaudio, rev 0x00) at pci9 dev 0 function 1 not configured >>>> pchb4 at pci0 dev 4 function 0 "AMD 17h Host" rev 0x00 >>>> pchb5 at pci0 dev 5 function 0 "AMD 17h Host" rev 0x00 >>>> pchb6 at pci0 dev 7 function 0 "AMD 17h Host" rev 0x00 >>>> ppb9 at pci0 dev 7 function 1 "AMD 17h PCIE" rev 0x00 >>>> pci10 at ppb9 bus 10 >>>> vendor "AMD", unknown product 0x148a (class instrumentation unknown subclass 0x00, rev 0x00) at pci10 dev 0 function 0 not configured >>>> pchb7 at pci0 dev 8 function 0 "AMD 17h Host" rev 0x00 >>>> ppb10 at pci0 dev 8 function 1 "AMD 17h PCIE" rev 0x00 >>>> pci11 at ppb10 bus 11 >>>> vendor "AMD", unknown product 0x1485 (class instrumentation unknown subclass 0x00, rev 0x00) at pci11 dev 0 function 0 not configured >>>> ccp0 at pci11 dev 0 function 1 "AMD 17h Crypto" rev 0x00 >>>> xhci1 at pci11 dev 0 function 3 "AMD 17h xHCI" rev 0x00: msix, xHCI 1.10 >>>> usb1 at xhci1: USB revision 3.0 >>>> uhub1 at usb1 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00 addr 1 >>>> "AMD 17h HD Audio" rev 0x00 at pci11 dev 0 function 4 not configured >>>> "AMD FCH SMBus" rev 0x61 at pci0 dev 20 function 0 not configured >>>> "AMD FCH LPC" rev 0x51 at pci0 dev 20 function 3 not configured >>>> pchb8 at pci0 dev 24 function 0 "AMD 17h Data Fabric" rev 0x00 >>>> pchb9 at pci0 dev 24 function 1 "AMD 17h Data Fabric" rev 0x00 >>>> pchb10 at pci0 dev 24 function 2 "AMD 17h Data Fabric" rev 0x00 >>>> pchb11 at pci0 dev 24 function 3 "AMD 17h Data Fabric" rev 0x00 >>>> pchb12 at pci0 dev 24 function 4 "AMD 17h Data Fabric" rev 0x00 >>>> pchb13 at pci0 dev 24 function 5 "AMD 17h Data Fabric" rev 0x00 >>>> pchb14 at pci0 dev 24 function 6 "AMD 17h Data Fabric" rev 0x00 >>>> pchb15 at pci0 dev 24 function 7 "AMD 17h Data Fabric" rev 0x00 >>>> isa0 at mainbus0 >>>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo >>>> pckbc0 at isa0 port 0x60/5 irq 1 irq 12 >>>> pckbd0 at pckbc0 (kbd slot) >>>> wskbd0 at pckbd0: console keyboard >>>> efifb0 at mainbus0: 1920x1200, 32bpp >>>> wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 >>>> umass0 at uhub0 port 8 configuration 1 interface 0 "vendor 0x13fe Patriot Memory" rev 2.00/1.00 addr 2 >>>> umass0: using SCSI over Bulk-Only >>>> scsibus2 at umass0: 2 targets, initiator 0 >>>> sd1 at scsibus2 targ 1 lun 0: <, Patriot Memory, PMAP> removable serial.13fe3e00070157349FF9 >>>> sd1: 7640MB, 512 bytes/sector, 15646720 sectors >>>> uhidev0 at uhub0 port 10 configuration 1 interface 2 "AsusTek Computer Inc. AURA LED Controller" rev 2.00/1.00 addr 3 >>>> uhidev0: iclass 3/0 >>>> "AsusTek Computer Inc. AURA LED Controller" rev 2.00/1.00 addr 3 at uhub0 port 10 configuration 1 not configured >>>> uhub2 at uhub0 port 11 configuration 1 interface 0 "vendor 0x05e3 USB2.0 Hub" rev 2.00/60.70 addr 4 >>>> uhidev1 at uhub0 port 13 configuration 1 interface 0 "Keychron Keychron C2" rev 2.00/1.04 addr 5 >>>> uhidev1: iclass 3/1 >>>> ukbd0 at uhidev1 >>>> wskbd1 at ukbd0 mux 1 >>>> wskbd1: connecting to wsdisplay0 >>>> uhidev2 at uhub0 port 13 configuration 1 interface 1 "Keychron Keychron C2" rev 2.00/1.04 addr 5 >>>> uhidev2: iclass 3/1, 3 report ids >>>> ukbd1 at uhidev2 reportid 1 >>>> wskbd2 at ukbd1 mux 1 >>>> wskbd2: connecting to wsdisplay0 >>>> uhid at uhidev2 reportid 2 not configured >>>> uhid at uhidev2 reportid 3 not configured >>>> uhidev3 at uhub1 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/5.03 addr 2 >>>> uhidev3: iclass 3/1 >>>> ukbd2 at uhidev3 >>>> wskbd3 at ukbd2 mux 1 >>>> wskbd3: connecting to wsdisplay0 >>>> uhidev4 at uhub1 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/5.03 addr 2 >>>> uhidev4: iclass 3/1, 11 report ids >>>> uhid at uhidev4 reportid 2 not configured >>>> uhid at uhidev4 reportid 3 not configured >>>> uhid at uhidev4 reportid 4 not configured >>>> uhid at uhidev4 reportid 11 not configured >>>> uhidev5 at uhub1 port 1 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/5.03 addr 2 >>>> uhidev5: iclass 3/0, 17 report ids >>>> uhid at uhidev5 reportid 16 not configured >>>> uhid at uhidev5 reportid 17 not configured >>>> uhidev6 at uhub1 port 1 configuration 1 interface 3 "Logitech USB Receiver" rev 2.00/5.03 addr 2 >>>> uhidev6: iclass 3/0, 42 report ids >>>> uhid at uhidev6 reportid 40 not configured >>>> uhid at uhidev6 reportid 41 not configured >>>> uhid at uhidev6 reportid 42 not configured >>>> softraid0 at root >>>> scsibus3 at softraid0: 256 targets >>>> sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> >>>> sd2: 476679MB, 512 bytes/sector, 976240063 sectors >>>> root on rd0a swap on rd0b dump on rd0b >>>> WARNING: CHECK AND RESET THE DATE! >>>> iwx0: could not read firmware iwx-ty-a0-gf-a0-77 (error 2) >>>> iwx0: failed to load init firmware >>> > >