some markup cleaning in the port-modules(5) manual
Ingo Schwarze <[email protected]>
| Newsgroups | gmane.os.openbsd.ports |
|---|---|
| Message-ID | <[email protected]> |
Hello,
some time ago, Marc Espie contacted me about the bogus construction
.Li Ev
in the port-modules(5) manual. It is bogus because the .Ev macro
terminates the preceding .Li macro, resulting in
mandoc: file:line:2: WARNING: skipping empty macro: Li
Also, while using .Li for in-line literal displays is sometimes
acceptable, it is often not a particularly good choice.
So i had a look at this manual page.
Any OKs or remarks on the following patch?
* more consistently mark up module names with .Cm, because
module names are fixed strings that have to be provided
verbatim in some command context - they are not argument
placeholders
* in particular, consistently mark up module names in the
main tagged list with .It Cm rather than with bare .It,
which has the side benefit of making less(1) commands like
":t java" and ":t devel/cmake" work
* when showing specific variable assignments, more consistently
use .Ev + operator + (Cm or Ar) rather than the less expressive .Li
* more consistently show Makefile targets with .Cm;
again, target names are not argument placeholders
* more consistently mark up the fixed strings Yes and No
with .Cm rather than with are mixed bag of quoting methods
* add a number of missing Oxford commas
* do not use .Nm for the names of commands _not_ documented
in the present page, .Sy is more appropriate for those
More copy-editing could definitely be performed here,
but this patch is already growing fat.
I'm sending it here because a very large number of ports developers
have contributed to this manual page in the past and may potentially
be interested in various modules.
Yours,
Ingo
Index: port-modules.5
===================================================================
RCS file: /cvs/src/share/man/man5/port-modules.5,v
diff -u -r1.286 port-modules.5
--- port-modules.5 25 Jun 2026 07:30:43 -0000 1.286
+++ port-modules.5 17 Aug 2026 11:12:53 -0000
@@ -51,18 +51,18 @@
For convenience, setting
.Ev CONFIGURE_STYLE
in a port's main Makefile is enough to get perl5 or autoconf support, but
-.Ar gnu ,
-.Ar imake
+.Cm gnu ,
+.Cm imake
and
-.Ar perl5
+.Cm perl5
are actually modules, and there is some glue in
.Xr bsd.port.mk 5
that magically adds the required module in that case.
This doesn't work when parsing modules.
For instance, if you set
-.Li CONFIGURE_STYLE=gnu
-in a module, you also need to
-.Li MODULES += gnu .
+.Ev CONFIGURE_STYLE Ns = Ns Cm gnu
+in a module, you also need to set
+.Ev MODULES No += Cm gnu .
.Pp
Other modules correspond to shortcuts for using some other ports as
dependencies without needing to hardcode too much, such as
@@ -87,7 +87,7 @@
Modules may refer to each other.
The modules mechanism has specific recursion handling such that
adding
-.Li MODULES += foo/bar
+.Ev MODULES No += Ar foo/bar
to a module will work as expected.
.Sh NAMING CONVENTIONS
Since there is no actual scope in makefiles, everything defined within
@@ -99,7 +99,7 @@
should be named
.Ev MODFOO_*
and
-.Ar modfoo_* .
+.Cm modfoo_* .
.Pp
Following the same conventions as
.Xr bsd.port.mk 5 ,
@@ -107,7 +107,7 @@
named
.Ev _MODFOO_*
and
-.Ar _modfoo_* .
+.Cm _modfoo_* .
.Pp
For instance, if a module wants some value to be available for the rest
of the world, it should define
@@ -141,7 +141,7 @@
Normal client ports will use
.Ev MODQT_LIB_DEPENDS ,
but a port may exceptionally import both modules with
-.Li MODULES += x11/qt5 x11/qt6
+.Ev MODULES No += Cm x11/qt5 x11/qt6
and differentiate between qt5 and qt6 needs with
.Ev MODQT5_LIB_DEPENDS
and
@@ -200,7 +200,12 @@
.Pp
Some
.Ev CONFIGURE_STYLE
-values, namely perl, gnu, imake, and autoconf,
+values, namely
+.Cm perl ,
+.Cm gnu ,
+.Cm imake ,
+and
+.Cm autoconf ,
will automatically import the correct module.
User-defined modules must both add to
.Ev CONFIGURE_STYLE
@@ -266,6 +271,7 @@
\&.endif
.Ed
.El
+.Pp
That way, if several modules require specific actions for those targets,
the end user can choose the appropriate order in which to run the actions:
.Bd -literal -offset indent
@@ -376,7 +382,10 @@
.Dl .include <bsd.port.mk>
.Pp
Thus they can be affected by user choices such as setting a variable
-to Yes or No.
+to
+.Cm Yes
+or
+.Cm \&No .
Modules may make decisions based on documented
.Ev MODFOO_BEHAVIOR
values.
@@ -407,7 +416,7 @@
.Sh CORE MODULES DOCUMENTATION
The following modules are available.
.Bl -tag -width do-configure
-.It cpan
+.It Cm cpan
For perl ports coming from CPAN.
Wrapper around the normal perl module that fetches the file from
the correct location depending on
@@ -422,7 +431,7 @@
.Ev CATEGORIES .
.Pp
Some CPAN modules are only indexed by author, set
-.Li Ev CPAN_AUTHOR Ns = Ns Ar ID
+.Ev CPAN_AUTHOR Ns = Ns Ar ID
to locate the right directory.
.Pp
If no
@@ -432,7 +441,8 @@
.Pp
User settings: set
.Ev CPAN_REPORT
-to Yes,
+to
+.Cm Yes ,
.Ev CPAN_REPORT_DB
to a valid directory,
and
@@ -460,7 +470,7 @@
...
${MODCPAN_POST_INSTALL}
.Ed
-.It databases/mariadb
+.It Cm databases/mariadb
Adds small framework for testing ports that require running MariaDB.
Defines
.Ev MODMARIADB_TEST_TARGET
@@ -505,7 +515,7 @@
.Xr mysqladmin 1 ,
respectively; those argument lists could be used in test scripts
for connecting to test server, if they aren't satisfied by environment.
-.It databases/postgresql
+.It Cm databases/postgresql
Adds small framework for testing ports that require running Postgres.
Defines
.Ev MODPOSTGRESQL_TEST_TARGET
@@ -542,7 +552,7 @@
.Ev TEST_DEPENDS ,
but not to any other
.Ev *_DEPENDS .
-.It devel/cmake
+.It Cm devel/cmake
Adds
.Pa devel/cmake
to
@@ -560,18 +570,24 @@
was not set before, sets its value to `cmake'.
Changes default value of
.Ev SEPARATE_BUILD
-to `Yes' because modern CMake requires out-of-source build anyway.
+to
+.Cm Yes
+because modern CMake requires out-of-source build anyway.
Changes
.Ev TEST_TARGET
-to `test' as this is standard for CMake projects.
+to
+.Cm test
+as this is standard for CMake projects.
Also this module has the following knobs:
.Bl -tag -width Ds
.It Ev MODCMAKE_DEBUG
-If set to `Yes', CMake will produce a debug build instead of a release
-build.
+If set to
+.Cm Yes ,
+CMake will produce a debug build instead of a release build.
The exact effects on the build process depend on settings specified in
the CMake config files.
-Default value is `No'.
+Default value is
+.Cm \&No .
.It Ev MODCMAKE_LDFLAGS
If set, the value will be passed to CMake via the
.Ev LDFLAGS
@@ -583,16 +599,24 @@
.Ev CMAKE_MODULE_LINKER_FLAGS_INIT .
Default value is empty.
.It Ev MODCMAKE_VERBOSE
-If set to `Yes', CMake will print details during configure and build
+If set to
+.Cm Yes ,
+CMake will print details during configure and build
stages about exact command being run, etc.
Should not be used in ports Makefiles.
-Default value is `Yes'.
+Default value is
+.Cm Yes .
.It Ev MODCMAKE_WANTCOLOR
-If set to `Yes', CMake will colorize its output.
+If set to
+.Cm Yes ,
+CMake will colorize its output.
Should not be used in ports Makefiles.
-Default value is `No'.
+Default value is
+.Cm \&No .
.It Ev USE_NINJA
-If set to `Yes', use
+If set to
+.Cm Yes ,
+use
.Xr ninja 1
as the build system instead of
.Xr make 1 .
@@ -600,40 +624,45 @@
.Pa devel/ninja
to
.Ev BUILD_DEPENDS .
-If set to `No', uses Unix Makefiles generator and adds
+If set to
+.Cm \&No ,
+uses Unix Makefiles generator and adds
.Sq nojunk
to
.Ev DPB_PROPERTIES .
-Default value is `Yes'.
+Default value is
+.Cm Yes .
.El
.Pp
When used together with other modules, appropriate variables are
automatically passed to CMake:
.Bl -tag -width "lang/python" -compact
-.It java
+.It Cm java
.Ev JAVA_HOME
is set in
.Ev CONFIGURE_ENV
and
.Ev MAKE_ENV .
-.It lang/python
+.It Cm lang/python
Python executable, library, and include paths are set for FindPython,
FindPython3, and FindPythonN modules.
-.It lang/lua
+.It Cm lang/lua
Lua include directory and library path are set for FindLua.
-.It lang/ruby
+.It Cm lang/ruby
Ruby executable is set for FindRuby.
-.It lang/tcl
+.It Cm lang/tcl
Tcl version, include, library directories and library name are set in
.Ev CONFIGURE_ENV .
-.It x11/tk
+.It Cm x11/tk
Tk version, include, library directories and library name are set in
.Ev CONFIGURE_ENV .
.El
.Pp
The environment variable
.Ev MODCMAKE_PORT_BUILD
-is automatically set to `yes' in
+is automatically set to
+.Cm yes
+in
.Ev CONFIGURE_ENV
and
.Ev MAKE_ENV .
@@ -641,14 +670,14 @@
ports control, and prevents network operations
.Pq file DOWNLOAD/UPLOAD
during the build.
-.It devel/cabal
+.It Cm devel/cabal
See
.Xr cabal-module 5
for porting Haskell applications.
-.It devel/cargo
+.It Cm devel/cargo
See
.Xr cargo-module 5 .
-.It devel/dconf
+.It Cm devel/dconf
Sets
.Ev CONFIGURE_ARGS ,
.Ev BUILD_DEPENDS
@@ -660,7 +689,7 @@
.Bd -literal -offset indent
@tag glib-compile-schemas
.Ed
-.It devel/gconf2
+.It Cm devel/gconf2
A link from
.Xr gconftool-2 1
to
@@ -669,7 +698,7 @@
.Ev PATH .
Sets
.Ev CONFIGURE_ARGS ,
-.Ev BUILD_DEPENDS
+.Ev BUILD_DEPENDS ,
and
.Ev RUN_DEPENDS .
According to the values of
@@ -681,7 +710,7 @@
to the directory name under
.Pa ${LOCALBASE}/share/schemas/
where schemas files will be installed.
-.It devel/meson
+.It Cm devel/meson
Adds
.Pa devel/meson
and
@@ -693,13 +722,17 @@
target.
If
.Ev CONFIGURE_STYLE
-was not set before, sets its value to `meson'.
+was not set before, sets its value to
+.Cm meson .
Changes default value of
.Ev SEPARATE_BUILD
-to `Yes' because meson requires out-of-source build.
+to
+.Cm Yes
+because meson requires out-of-source build.
If
.Ev CONFIGURE_STYLE
-is 'meson',
+is
+.Cm meson ,
.Ev MODMESON_CONFIGURE_ARGS
and
.Ev MODMESON_CONFIGURE_ENV
@@ -729,14 +762,17 @@
This module supports the following knob:
.Bl -tag -width Ds
.It Ev MODMESON_WANTCOLOR
-If set to `Yes', meson will colorize its output.
+If set to
+.Cm Yes ,
+meson will colorize its output.
Should not be used in ports Makefiles.
-Default value is `No'.
+Default value is
+.Cm \&No .
.El
-.It devel/qmake
+.It Cm devel/qmake
See
.Xr qmake-module 5 .
-.It devel/scons
+.It Cm devel/scons
Adds
.Pa devel/scons
to
@@ -752,7 +788,7 @@
and
.Cm do-install
targets that can be overridden in the port Makefile.
-.It font
+.It Cm font
Used for ports which primarily install fonts.
Affects
.Ev PKG_ARCH
@@ -805,7 +841,7 @@
.Ev MODFONT_WEBFILES
must also declare a -web subpackage in
.Ev MULTI_PACKAGES .
-.It fortran
+.It Cm fortran
Sets
.Ev MODFORTRAN_LIB_DEPENDS ,
.Ev MODFORTRAN_WANTLIB ,
@@ -813,10 +849,11 @@
Set
.Ev MODFORTRAN_COMPILER
depending on what the port requires.
-The current default and only supported value is `gfortran'.
+The current default and only supported value is
+.Cm gfortran .
The dependencies are chosen according to
.Ev MODFORTRAN_COMPILER .
-.It gcc4
+.It Cm gcc4
If
.Ev COMPILER_VERSION
is not gcc4 (defined by
@@ -838,22 +875,22 @@
.Ev MODGCC4_CPPLIBDEP
and
.Ev MODGCC4_CPPWANTLIB .
-.It gnu
+.It Cm gnu
This module is documented in the main
.Xr bsd.port.mk 5
manpage.
-.It imake
+.It Cm imake
This module is documented in the main
.Xr bsd.port.mk 5
manpage.
-.It java
+.It Cm java
Set
-.Li MODJAVA_VER=x.y
+.Ev MODJAVA_VER Ns = Ns Ar x.y
to use exactly the JDK x.y,
-.Li MODJAVA_VER=x.y+
+.Ev MODJAVA_VER Ns = Ns Ar x.y Ns Cm \&+
to use any x.y or higher version.
Set
-.Li MODJAVA_JRERUN=Yes
+.Ev MODJAVA_JRERUN Ns = Ns Cm Yes
if the port only needs the JRE at runtime.
The module sets
.Ev JAVA_HOME ,
@@ -861,20 +898,20 @@
.Ev MODJAVA_RUN_DEPENDS ,
.Ev MODJAVA_SHARE_DIR ,
.Ev MODJAVA_JAR_DIR ,
-.Ev MODJAVA_EXAMPLE_DIR
+.Ev MODJAVA_EXAMPLE_DIR ,
and
.Ev MODJAVA_DOC_DIR .
It appends to
.Ev BUILD_DEPENDS ,
.Ev RUN_DEPENDS ,
-.Ev CATEGORIES
+.Ev CATEGORIES ,
and
.Ev SUBST_VARS .
If
-.Li MODJAVA_BUILD=ant
+.Ev MODJAVA_BUILD Ns = Ns Cm ant ,
then this module provides
.Ev MODJAVA_BUILD_DIR ,
-.Ev MODJAVA_BUILD_FILE
+.Ev MODJAVA_BUILD_FILE ,
and
.Ev MODJAVA_BUILD_TARGET_NAME ,
as well as a
@@ -882,7 +919,7 @@
target (if not already defined).
It heeds
.Ev NO_BUILD .
-.It lang/clang
+.It Cm lang/clang
Similar to gcc4 module.
If architecture is in MODCLANG_ARCHS, the Clang compilers will be
put at the front of the path.
@@ -894,11 +931,11 @@
.Ev MODCLANG_VERSION
which is also appended to
.Ev SUBST_VARS .
-.It lang/erlang
-.It lang/go
+.It Cm lang/erlang
+.It Cm lang/go
See
.Xr go-module 5 .
-.It lang/lua
+.It Cm lang/lua
Sets
.Ev MODLUA_BIN ,
.Ev MODLUA_DATADIR ,
@@ -917,12 +954,14 @@
.Ev BUILD_DEPENDS ,
unless
.Ev NO_BUILD
-has been set to Yes.
+has been set to
+.Cm Yes .
Also appends to
.Ev RUN_DEPENDS ,
unless
.Ev MODLUA_RUNDEP
-is set to No.
+is set to
+.Cm \&No .
Appends
.Ev MODLUA_VERSION ,
.Ev MODLUA_LIB ,
@@ -942,24 +981,32 @@
.Ev MODLUA_DEFAULT_VERSION
by default.
Ports can be built with several lua versions.
-If no FLAVOR is set, it defaults to MODLUA_DEFAULT_VERSION.
-Otherwise the FULLPKGNAME is adjusted, if MODLUA_SA is not set.
+If no
+.Ev FLAVOR
+is set, it defaults to
+.Ev MODLUA_DEFAULT_VERSION .
+Otherwise the
+.Ev FULLPKGNAME
+is adjusted, if
+.Ev MODLUA_SA
+is not set.
In order to set a build, run or test dependency on a lua port,
use the following, which will propagate the currently used flavor:
.Ev MODLUA_BUILD_DEPENDS ,
.Ev MODLUA_TEST_DEPENDS ,
.Ev MODLUA_RUN_DEPENDS .
-.It lang/mono
+.It Cm lang/mono
Sets
.Ev MODMONO_ONLY_FOR_ARCHS ,
.Ev CONFIGURE_ENV ,
.Ev MAKE_FLAGS ,
-.Ev MODMONO_BUILD_DEPENDS
+.Ev MODMONO_BUILD_DEPENDS ,
and
.Ev MODMONO_RUN_DEPENDS .
If
.Ev MODMONO_DEPS
-is set to Yes,
+is set to
+.Cm Yes ,
.Pa lang/mono
is appended to
.Ev BUILD_DEPENDS
@@ -970,7 +1017,7 @@
shared library versions using a
.Cm post-configure
target.
-.It lang/ocaml
+.It Cm lang/ocaml
Appends to
.Ev BUILD_DEPENDS
and
@@ -979,7 +1026,9 @@
.Ev RUN_DEPENDS
unless
.Ev MODOCAML_RUNDEP
-is set to No, or set to if-not-native and native compilation
+is set to
+.Cm \&No ,
+or set to if-not-native and native compilation
is supported on this architecture.
Including this module selects a %%native%% plist fragment and
.Ev ocaml_native
@@ -991,14 +1040,15 @@
property is set.
When
.Ev CONFIGURE_STYLE
-is set to `oasis',
+is set to
+.Cm oasis ,
overrides for the
.Cm do-build ,
.Cm do-install ,
and
.Cm do-test
targets are added.
-.It lang/php
+.It Cm lang/php
Used for ports using PHP in some way:
either extensions to PHP, or software written in PHP.
Sets
@@ -1008,19 +1058,21 @@
.Ev MODPHP_BIN ,
.Ev MODPHP_PHPIZE ,
.Ev MODPHP_PHP_CONFIG ,
-.Ev MODPHP_INCDIR
+.Ev MODPHP_INCDIR ,
and
.Ev MODPHP_LIBDIR .
Adds to
.Ev RUN_DEPENDS
unless
.Ev MODPHP_RUNDEP
-is set to No.
+is set to
+.Cm \&No .
Adds to
.Ev BUILD_DEPENDS
if
.Ev MODPHP_BUILDDEP
-is set to Yes.
+is set to
+.Cm Yes .
If
.Ev MODPHP_DO_PHPIZE
is set, prepares a build environment for extensions that use phpize.
@@ -1037,7 +1089,7 @@
and allows any of these PDO packages to satisfy the dependency, with
.Ev MODPHP_PDO_PREF
(sqlite by default) chosen if none are installed.
-.It lang/php/pecl
+.It Cm lang/php/pecl
Used for ports for PHP PECL extensions.
Sets default
.Ev SITES ,
@@ -1066,13 +1118,13 @@
.Ev PKGNAME
and appends to
.Ev CATEGORIES .
-.It lang/python
+.It Cm lang/python
See
.Xr python-module 5 .
-.It lang/ruby
+.It Cm lang/ruby
See
.Xr ruby-module 5 .
-.It lang/rust
+.It Cm lang/rust
Ports using Rust must use this module so a rebuild can be triggered via
.Ev SYSTEM_VERSION-rust
on updates of the lang/rust port or changes to the Rust standard library.
@@ -1080,13 +1132,15 @@
.Ev MODRUST_WANTLIB
as appropriate for the architecture so it can be added to
.Ev WANTLIB .
-It adds lang/rust to the
+It adds
+.Pa lang/rust
+to the
.Ev BUILD_DEPENDS
unless
.Ev MODRUST_BUILDDEP
is set to anything but
-.Dq yes .
-.It lang/tcl
+.Cm Yes .
+.It Cm lang/tcl
Sets
.Ev MODTCL_VERSION ,
.Ev MODTCL_BIN ,
@@ -1106,11 +1160,11 @@
shell fragments to patch the interpreter path in executable scripts.
Also affects
.Ev CATEGORIES .
-.It perl
+.It Cm perl
This module is documented in the main
.Xr bsd.port.mk 5
manpage.
-.It security/heimdal
+.It Cm security/heimdal
A link from ${LOCALBASE}/heimdal/bin/krb5-config
to
.Xr krb5-config 1
@@ -1123,7 +1177,7 @@
.Ev MODHEIMDAL_LIB_DEPENDS ,
and
.Ev MODHEIMDAL_WANTLIB .
-.It textproc/intltool
+.It Cm textproc/intltool
Sets
.Ev MODINTLTOOL_OVERRIDE .
.Pa textproc/intltool
@@ -1146,7 +1200,7 @@
by appending
.Ev MODINTLTOOL_OVERRIDE
to them.
-.It www/mozilla
+.It Cm www/mozilla
Sets
.Ev PKGNAME ,
.Ev HOMEPAGE ,
@@ -1161,12 +1215,12 @@
Adds common dependencies to
.Ev LIB_DEPENDS ,
.Ev WANTLIB ,
-.Ev RUN_DEPENDS
+.Ev RUN_DEPENDS ,
and
.Ev BUILD_DEPENDS .
Sets common
.Ev CONFIGURE_ARGS ,
-.Ev MAKE_ENV
+.Ev MAKE_ENV ,
and
.Ev CONFIGURE_ENV .
Sets
@@ -1182,7 +1236,7 @@
.Ev MOZILLA_CODENAME ,
.Ev MOZILLA_VERSION ,
.Ev MOZILLA_BRANCH ,
-.Ev MOZILLA_LIBS
+.Ev MOZILLA_LIBS ,
and
.Ev MOZILLA_DATADIRS
variables.
@@ -1200,11 +1254,11 @@
.Ev AUTOCONF
will be run during
.Cm pre-configure .
-.It wayland/wlroots
+.It Cm wayland/wlroots
Used for Wayland ports using the wlroots library.
Sets
.Ev MODWLROOTS_LIB_DEPENDS ,
-.Ev MODWLROOTS_WANTLIB
+.Ev MODWLROOTS_WANTLIB ,
and
.Ev MODWLROOTS_VERSION .
Appends the corresponding values to
@@ -1213,8 +1267,9 @@
.Ev WANTLIB ,
unless
. Ev MODWLROOTS_LIBDEP
-is set to No.
-.It www/pear
+is set to
+.Cm \&No .
+.It Cm www/pear
Used for PHP PEAR ports.
Sets default
.Ev SITES ,
@@ -1247,11 +1302,11 @@
.Ev PKGNAME
and appends to
.Ev CATEGORIES .
-.It x11/gnome
+.It Cm x11/gnome
See
.Xr gnome-module 5 .
-.It x11/gnustep
-.It x11/qt5 and x11/qt6
+.It Cm x11/gnustep
+.It Cm x11/qt5 No and Cm x11/qt6
All qt* modules share a common
.Ev MODQT_*
namespace for simple ports.
@@ -1273,15 +1328,15 @@
as standard GNU configure-style parameters to locate the include and libraries.
.Pp
The location of Qt-specific tools
-.Nm lrelease ,
-.Nm moc ,
-.Nm qmake
+.Sy lrelease ,
+.Sy moc ,
+.Sy qmake ,
and
-.Nm uic
+.Sy uic
is available through
.Ev MODQT*_LRELEASE ,
.Ev MODQT*_MOC ,
-.Ev MODQT*_QMAKE
+.Ev MODQT*_QMAKE ,
and
.Ev MODQT*_UIC .
.Ev MODQT*_OVERRIDE_UIC
@@ -1293,13 +1348,14 @@
is always forced to ${MODQT*_MOC}.
.Pp
In most cases the
-.Pa devel/qmake
+.Cm devel/qmake
module should be used instead of using
.Ev MODQT*_QMAKE
directly.
.Pp
The modules add to
-.Ev CONFIGURE_ENV , MAKE_ENV
+.Ev CONFIGURE_ENV ,
+.Ev MAKE_ENV ,
and
.Ev MAKE_FLAGS .
They define appropriate
@@ -1314,11 +1370,11 @@
Qt5 and Qt6 consist of many so called Qt modules, these Qt modules should be
added to
.Ev LIB_DEPENDS ,
-.Ev BUILD_DEPENDS
+.Ev BUILD_DEPENDS ,
or
.Ev RUN_DEPENDS
manually.
-.It x11/tk
+.It Cm x11/tk
Sets
.Ev MODTK_VERSION ,
.Ev MODTK_BIN ,
@@ -1333,7 +1389,7 @@
is the default version used by all Tk ports and
may be overridden.
Automatically adds the
-.Pa lang/tcl
+.Cm lang/tcl
module, provides a default
.Ev MODTCL_VERSION
to match
@@ -1343,19 +1399,21 @@
Note the
.Ev MODTCL_WISH_ADJ
shell fragment in the
-.Pa lang/tcl
+.Cm lang/tcl
module.
-.It x11/xfce4
+.It Cm x11/xfce4
Sets
.Ev DIST_SUBDIR ,
.Ev EXTRACT_SUFX ,
.Ev CONFIGURE_STYLE ,
-.Ev CONFIGURE_ENV
+.Ev CONFIGURE_ENV ,
and
.Ev USE_GMAKE .
If
.Ev MODXFCE_ICON_CACHE
-is set to yes, it adds
+is set to
+.Cm Yes ,
+it adds
.Pa x11/gtk+4,-guic
to
.Ev RUN_DEPENDS .
@@ -1371,7 +1429,7 @@
Xfce ports can be divided into five categories: core libraries and
applications, goodies, artwork, thunar plugins, and panel plugins.
.Ev HOMEPAGE ,
-.Ev SITES
+.Ev SITES ,
and
.Ev DISTNAME
are built using
@@ -1382,7 +1440,7 @@
.Ev XFCE_PROJECT ,
.Ev XFCE_GOODIE ,
.Ev XFCE_ARTWORK ,
-.Ev THUNAR_PLUGIN
+.Ev THUNAR_PLUGIN ,
or
.Ev XFCE_PLUGIN .
One of the latter has to be provided by the port Makefile.