Wireless w/ vlan configuration

Hello all,
I am trying to accomplish the following setup:

                     vlan3                    _______________
router |------- vlan4 ----------------| dc0(ext)  dc1(int) |-------- vlan3
----------| switch |---------| switch |
                     vlan10                  |                            
|           
 vlan10
                                                 |__ ural0(wlan) ___|         
      
                                                              
 |
                                                               |
                                                            vlan4

Below is my interface configuration:

dc0: up
dc1: up
ural0: media autoselect mode 11g mediaopt hostap nwid elcm

vlan110: inet 192.168.10.5 255.255.255.0 NONE vlan 10 vlandev dc0
vlan13: inet 192.168.53.5 255.255.255.0 NONE vlan 3 vlandev dc0
vlan14: inet 192.168.54.5 255.255.255.0 NONE vlan 4 vlandev dc0
vlan210: up vlan 10 vlandev dc1
vlan23: up vlan 3 vlandev dc1
vlan34: up vlan 4 vlandev
 ural0
                                                 
bridge10: add vlan110 add vlan210 up
bridge3: add vlan13 add vlan23 up
bridge4: add vlan14 add vlan34 up

pf.conf
pass all


I able to ping all network devices (switches) from the router, but I am
unable to ping clients connected to the switches from the router.  On
the
other hand clients are able to ping everything all the way out to
the
internet.

Also when connecting via wireless (ural0) the client nor any other
device can
ping each other.   Am I misunderstanding something?


Would someone be able to point me in the right direction?  Any help would be
greatly appreciated.


Thank you in advance.


cheers,

abs