i realized the ascii diagram got completed messed up. here's a better
version.
vlan3 _______________
router |-- vlan4 ---| dc0(ext) dc1(int) |--- vlan3 -----| switch |---- vlan3
-----| switch |
vlan10 | |
vlan10 vlan10
|__ ural0(wlan) ___|
|
vlan4
--- On Sat, 7/11/09, [email protected] <[email protected]> wrote:
From: [email protected] <[email protected]>
Subject: Wireless w/ vlan configuration
To: [email protected]
Date: Saturday, July 11, 2009, 4:29 AM
Hello all,
I am trying to accomplish the following
setup:
vlan3 _______________
router |------- vlan4 ----------------| dc0(ext) dc1(int) |-------- vlan3
----------| switch |---------| switch |
vlan10 |
|
vlan10
|__ ural0(wlan) ___|
|
|
vlan4
Below is my interface configuration:
dc0: up
dc1: up
ural0: media autoselect mode 11g mediaopt hostap nwid elcm
vlan110: inet 192.168.10.5 255.255.255.0 NONE vlan 10 vlandev dc0
vlan13: inet 192.168.53.5 255.255.255.0 NONE vlan 3 vlandev dc0
vlan14: inet 192.168.54.5 255.255.255.0 NONE vlan 4 vlandev dc0
vlan210: up vlan 10
vlandev dc1
vlan23: up vlan 3 vlandev dc1
vlan34: up vlan 4 vlandev
ural0
bridge10: add vlan110 add vlan210 up
bridge3: add vlan13 add vlan23 up
bridge4: add vlan14 add vlan34 up
pf.conf
pass all
I able to ping all network devices (switches) from the router, but I am
unable to ping clients connected to the switches from the router. On
the
other hand clients are able to ping everything all the way out to
the
internet.
Also when connecting via wireless (ural0) the client nor any other
device can
ping each other. Am I misunderstanding something?
Would someone be able to point me in the right direction? Any help would be
greatly appreciated.
Thank you in
advance.
cheers,
abs
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.