Re: Just got my first Sparc and trying to net install openbsd

Fixed.

my exports file was not right.

Thanks for the suggestions!

Erin

On Thu, Mar 11, 2010 at 10:42 PM, Matthieu Herrb <[email protected]>wrote:

> On Thu, Mar 11, 2010 at 06:43:19PM -0800, Erin O'Meara wrote:
> > I think I'm very close but just need a little push.
> >
> > I got a Sun Netra X1, have the cable hooked up and connected to the LOM.
> > I have setup another box with nfs, rpc.bootparams, rarap.
> >
> > It starts to boot off the network but i'm a little lost on getting it to
> > load bsd.rd
> >
> > Output from the server
> > Sun Netra X1 (UltraSPARC-IIe 500MHz), No Keyboard
> > OpenBoot 4.0, 896 MB memory installed, Serial #51368293.
> > Ethernet address 0:3:ba:f:d1:65, Host ID: 830fd165.
> >
> >
> >
> > Executing last command: boot net bsd.rd
> > Boot device: /pci@1f,0/ethernet@c  File and args: bsd.rd
> > 10400 >> OpenBSD BOOT 1.3
> > Using BOOTPARAMS protocol: ip address: 192.168.2.147, hostname: sunbox
> > root addr=192.168.2.177 path=/export/sparc
> > open /pci@1f,0/ethernet@c/bsd.rd: Unknown error: code 13
>
> Did you inform mountd of your exports changes by sending it a SIGHUP?
> check in logs if there are any errors from reloading exports.
>
> >
> > I know rarpd is configured properly since that works (ether address + ip
> > duhh)
> >
> > but  i'm very unsure of the rest.
> >
> > # more exports
> > #       $OpenBSD: exports,v 1.2 2002/05/31 08:15:44 pjanzen Exp $
> > #
> > # NFS exports Database
> > # See exports(5) for more information.  Be very careful:
>  misconfiguration
> > # of this file can result in your filesystems being readable by the
> world.
> >
> > /export -maproot=root -alldirs  webserver01
> > /export -maproot=sparc - alldirs sunbox
> > /usr -ro                        webserver01
> >
> > # more exports
> > #       $OpenBSD: exports,v 1.2 2002/05/31 08:15:44 pjanzen Exp $
> > #
> > # NFS exports Database
> > # See exports(5) for more information.  Be very careful:
>  misconfiguration
> > # of this file can result in your filesystems being readable by the
> world.
> >
> > /export -maproot=root -alldirs  webserver01
> > /export -maproot=sparc - alldirs sunbox
> > /usr -ro                        webserver01
> > #
> > # more bootparams
> > webserver01 root=192.168.2.177:/export/root \
> >                 swap=192.168.2.177:/export/swap
> >
> > sunbox  root=192.168.2.177:/export/sparc
> >
> > I have been over and over the diskless man page and just can't wrap my
> head
> > around what I'm missing.
> >
> > --
> > Erin O'Meara
> >
>
> --
> Matthieu Herrb
>



-- 
Erin O'Meara
Office: 206.905.9520
Cell: 425.785.2226