Re: dev/console
Hugh Graham <[email protected]> Fri, 28 Jan 2005 20:45:28 -0800
| Newsgroups | gmane.os.openbsd.vax |
|---|---|
| Message-ID | <[email protected]> |
On Fri, Jan 28, 2005 at 09:45:57PM -0600, John Baker wrote: > I was able to get mu micro vax to boot from the OpenBSD that i have > running on an i386 box. > It loads and all seems well until it gets to the end of this display code. > gooling hassn't been much help. > Any ideas on what could be causing it? You need to set up your /export/vax directory. tar xvzpf the base36/etc36 install sets under there, and run a sh MAKEDEV all in the /var/eport/vax/dev directory, set up the /var/export/vax/etc/fstab, set a root password and a few other things I'm probably forgetting and you should be good to go. /Hugh > Thanks > John > > > booted from device: le0 > nfs_boot: using network interface 'le0' > nfs_boot: client_addr=192.168.0.100 > nfs_boot: server_addr=192.168.0.22 hostname=vaxnoid > root on solar:/export/vax > swap on solar:/export/vax > warning: /dev/console does not exist > init: not found > panic: no init > Stopped at _start_init+0x176: ret