Re: Blade 1000 not booting up

Hi Fabio,

I don't know if it's the same that happens to my blade sometimes, but if 
you "kick" the blade it should work again. Well at least it works for my 
Blade :)
[but do it gently and at your own risk!]

I know it does not sound very scientific. In my case the reason is 
somewhat related to the hard drives. My feeling is that they cannot 
"boot" (i.e. spin the plates) or something related to the initial power 
they need to spin up.

If you really want to see if the problem is with the disks, simply 
unplug them and see if it boots. I identified the problem simply 
unplugging them.

Let me know! :)

Thank you

> Hello,
> 
> I have a Sun blade 1000 workstation, when I turn it on, the Sun logo 
> light up, but after 3 seconds, suddenly, the machine is power off.
> 
> What's the cause of this behavior ? is this a classic power supply 
> failure ?
> 
> Thanks for any advise,
> 
> fabio.
> _______________________________________________
> Suns-at-Home mailing list
> [email protected]
> http://www.net-kitchen.com/mailman/listinfo/suns-at-home
> 


-- 

Ciao Ciao

     _
   ->B<-   All Recycled Bytes Message ...
     ~