Re: Fried SCSI controller?
Cody Swanson <[email protected]>
| Newsgroups | gmane.os.solaris.at-home |
|---|---|
| Message-ID | <[email protected]> |
On a sun system if you probe the scsi bus after a halt you will get a bus error. Try running a test scsi after a cold boot before the OS loads. [email protected] wrote: > Hi all. > I got a Sun Enterprise 220R (2 X UltraSPARC-II 450MHz), with a pair of disks > to play with... During boot I get "Bus fault" errors. The same occurs if I > stop the OS and test the SCSI subsystem. I am not sure it's a disk/cable or > controller (fried chip?) related problem. > > [root@db-1 root]# halt > syncing file systems... done > Program terminated > {0} ok test scsi > Bus fault > Bus fault > Bus fault > ... > > I tried to disconnect the CDROM and to swap disks, but nothing changes. > What do you think? Thanks! > > --Tony > _______________________________________________ > Suns-at-Home mailing list > [email protected] > http://www.net-kitchen.com/mailman/listinfo/suns-at-home > >