Re: ZFS web gui

I ran your suggested solutions and received different results, I
installed a lot of system updates and now I receive a different error
message which is "launch error, no application is registered with this
sun java web console or I don't have rights"

I feel that my problem is with the DNS configurations. I am running on
a work group "huntley TECH" I am not sure about the proper config.

Howard Huntley <[email protected]> wrote:

>Thank you for your assistance
>I forgot to include the facts that I am running Solaris v10 10/08,
>Java v5U16, ZFS on an 80gig drive mounted on UFS 80 gig drive
>on a Blade 100 with 11+ meg of ram on a workgroup. On an earlier
>install I could access the interface with no problems but something
>was wrong with ZFS and I reinstalled the solaris v10 10/08 and now I
>am unable to access the Java  ZFS web interface. I enabled the "smcwebserver
>enable" to start on every system boot. 
>There seems to be a flaw in the Java web site. When I access the site
>it tells me that I am running v5.U16 and that I should D/L version
>6U11. Which I have done several times with the same results from the
>web site and my local machine.

>I will run the procedure you outlined, Thanks a lot.
>
>Eddie <[email protected]> wrote:
>
>>I dont know if you have already enabled the following service so that
>>webconsole starts at every reboot:
>>
>>% svcadmin enable svc:/system/webconsole:console
>>
>>The you will need to enable the service so that i can be accessed
>>remotely:
>>
>>% svccfg -s svc:/system/webconsole setprop options/tcp_listen = true
>>% svcadm refresh svc:/system/webconsole
>>
>>If you need more info reference the smcwebserver manual page. Also if
>>you are using U6 note that there is a bug with the zfs console and
>>having / in a zfs pool.  I havent seen any patches to it yet and
>>desperately waiting.
>>
>>Hope this helps,
>>edward-
>>
>>
>>On Jan 19, 10:45 pm, Howard Huntley <[email protected]> wrote:
>>> I am having problems starting my ZFS Web GUI. I have to start the
>>> process manually from the Command line. There is something wrong with
>>> the install, it should start when solaris starts.
>>> When I start the listener manually using the command
>>> "/usr/sbin/smcwebserver start" it appears that I am running 2
>>> instences of the (/usr/sbin/smcwebserver). I can not connect using
>>> url: https/localhost:6789/zfs. Can any one help me?
Howard Huntley Jr. MCP, MCSE
Micro-Computer Systems Specialist