Re: Sun-2 docs available

(I'm also sending this message to the [email protected]
list, primarily to see if it still works.)

On Mon, Jun 17, 2013 at 2:03 PM, Josh Dersch <[email protected]> wrote:
> On Mon, Jun 17, 2013 at 4:57 AM, James Carpenter <[email protected]>wrote:
>
>> On Sun, Jun 16, 2013 at 9:59 PM, Josh Dersch <[email protected]> wrote:
>> > http://yahozna.dyndns.org/scratch/sun2/docs/
>> >
>> > A set of miscellaneous Sun-2 related documentation (special thanks go
>> out to
>> > r. stricklin for his gracious assistance in getting these scanned)
>> including
>> > brochures, release notes, configuration guides, and hardware notes.
>>
>> This will be useful to me. I have a (nearly) fully functional 2/120.
>> However, I have very little documentation, especially for the
>> hardware. Need anything I can get.
>>
>
> Cool, glad it'll be useful to someone.
>
> I also have a working 2/120, so I can probably help out with configuration
> / software issues if you need, I also have lots of other documents that
> didn't get scanned, so if you have a specific question, I can try to look
> things up.

... and ...

On Tue, Jun 18, 2013 at 7:24 AM, Michael Thompson
<[email protected]> wrote:
> I have a fully functional 2/120 and disk tower, with a 2/50 client.
> I would be happy to help with any issues that your system might have.
> https://sites.google.com/site/mthompsonorg/Home/sun-microsystems/sun-2

Well thank you both very much. The only real issue I have right now is
that I zapped my ethernet card. I don't have a transceiver cable so I
quickly made one and stupidly neglected adding protective ground.
Worked great but a couple years ago while plugging in an ethernet
cable I discharged to either the CentreCOM transceiver's shell or its
jack. Now the Sun won't work with any of my CentreCOM 210T
transceivers but WILL WORK with my old Plexcom 8054S. Not sure what's
up with that!

I don't suppose anyone has a schematic of the 2/120's ethernet card,
501-1004? I should be able to fix the problem without it but it would
be nice to have.

Jim