Thanks to all thos who answered me so far.
The consensus seems to be a faulty memory dimm so I will try testing
those first. If it solves the problem, I will summarize fully.
Regards,
Peter
Forwarded message:
> From peter Thu Feb 1 10:33:57 2007
> Subject: Problem on ES40
> To: [email protected]
> Date: Thu, 1 Feb 2007 10:33:57 +0200 (IST)
> From: [email protected]
> Reply-to: [email protected]
> X-Mailer: ELM [version 2.5 PL3]
> Content-Length: 6149
>
> We have an old ES40 (Tru64 v4.0f) which has been generally working
> fine. About four months ago, it rebooted after recording the
> following messages every few minutes in /var/adm/messages:
> Sep 29 15:20:16 chemphys vmunix: trap: invalid memory read access
> from kernel mode
> Sep 29 15:20:16 chemphys vmunix:
> Sep 29 15:20:17 chemphys vmunix: faulting virtual address:
> 0xffffffff813bc000
> Sep 29 15:20:17 chemphys vmunix: pc of faulting instruction:
> 0xfffffc0000268884
> Sep 29 15:20:17 chemphys vmunix: ra contents at time of fault:
> 0xfffffc0000268870
> Sep 29 15:20:17 chemphys vmunix: sp contents at time of fault:
> 0xffffffffbc953850
> Sep 29 15:20:17 chemphys vmunix:
> Sep 29 15:20:17 chemphys vmunix: panic (cpu 2): kernel memory fault
> Sep 29 15:20:17 chemphys vmunix: device string for dump = SCSI 1 2 0
> 0 0 0 0.
> Sep 29 15:20:17 chemphys vmunix: DUMP.prom: dev SCSI 1 2 0 0 0 0 0,
> block 524288Sep 29 15:20:17 chemphys vmunix: device string for dump =
> SCSI 1 2 0 0 0 0 0.
> Sep 29 15:20:17 chemphys vmunix: DUMP.prom: dev SCSI 1 2 0 0 0 0 0,
> block 524288Sep 29 15:20:17 chemphys vmunix: Alpha boot: available
> memory from 0x2e1a000 to
> 0x7fffc000
>
> But then, about two weeks ago it started giving the following errors
> (which I did not noice at the time):
> Jan 19 02:12:23 chemphys vmunix: WARNING: too many Processor
> corrected errors detected on cpu 1. Reporting suspended.
> Jan 19 02:12:29 chemphys vmunix: WARNING: too many Processor
> corrected errors detected on cpu 3. Reporting suspended.
> Jan 19 02:12:38 chemphys vmunix: WARNING: too many Processor
> corrected errors detected on cpu 0. Reporting suspended.
> Jan 19 02:13:46 chemphys vmunix: WARNING: too many Processor
> corrected errors detected on cpu 2. Reporting suspended.
>
> ...
>
> Jan 30 14:08:52 chemphys vmunix: WARNING: too many System corrected
> errors detected on cpu 0. Reporting suspended.
> Jan 30 15:11:54 chemphys vmunix: WARNING: too many Processor
> corrected errors detected on cpu 3. Reporting suspended.
> Jan 30 15:34:15 chemphys vmunix: WARNING: too many Processor
> corrected errors detected on cpu 2. Reporting suspended.
> Jan 30 18:28:34 chemphys vmunix: WARNING: too many System corrected
> errors detected on cpu 0. Reporting suspended.
>
> until after 11+ days it crashed and rebooted:
> Jan 30 18:47:08 chemphys vmunix: Machine Check Processor Fatal Abort
> Jan 30 18:47:08 chemphys vmunix: Machine check code = 0x1000000a0
> Jan 30 18:47:09 chemphys vmunix: Ibox Status
> = 0000000000000000
> Jan 30 18:47:09 chemphys vmunix: Dcache Status
> = 0000000000000008
> Jan 30 18:47:09 chemphys vmunix: Cbox Address
> = 0000000029ab2bc0
> Jan 30 18:47:09 chemphys vmunix: Fill Syndrome 1
> = 0000000000000000
> Jan 30 18:47:09 chemphys vmunix: Fill Syndrome 0
> = 000000000000006b
> Jan 30 18:47:09 chemphys vmunix: Cbox Status
> = 000000000000000b
> Jan 30 18:47:09 chemphys vmunix: EV6 captured status of Bcache
> mode
> = 0000000000000002
> Jan 30 18:47:09 chemphys vmunix: EV6 Exception Address
> = 00000000121e9b00
> Jan 30 18:47:09 chemphys vmunix: EV6 Interrupt Enablement and
> Current Processor mode = 0000007ee0000008
> Jan 30 18:47:09 chemphys vmunix: EV6 Interrupt Summary Register
> = 0000000080000000
> Jan 30 18:47:09 chemphys vmunix: EV6 TBmiss or Fault status
> = 0000000000000280
> Jan 30 18:47:09 chemphys vmunix: EV6 PAL Base Address
> = 0000000000018000
> Jan 30 18:47:09 chemphys vmunix: EV6 Ibox control
> = fffffffc06304396
> Jan 30 18:47:09 chemphys vmunix: EV6 Ibox Process_context
> = 0000410000000004
> Jan 30 18:47:09 chemphys vmunix: O/S Summary flag
> = 0000000000000000
> Jan 30 18:47:09 chemphys vmunix: Cchip Base Address (phys)
> = 00000801a0000000
> Jan 30 18:47:09 chemphys vmunix: Cchip Device Raw Interrupt
> Request
> = 0000000000000000
> Jan 30 18:47:09 chemphys vmunix: DRIR Register Decode:
> Jan 30 18:47:09 chemphys vmunix: PCI Device Interrupt
> Mask
> = 0000000000000000
> Jan 30 18:47:09 chemphys vmunix: Cchip Miscellaneous Register
> = 0000000000000000
> Jan 30 18:47:09 chemphys vmunix: Misc Register Decode:
> Jan 30 18:47:09 chemphys vmunix: Cchip Revision: 00
> Jan 30 18:47:09 chemphys vmunix: ID of CPU performing
> read: 00
> Jan 30 18:47:09 chemphys vmunix: Pchip 0 Base Address (phys)
> = 0000080180000000
> Jan 30 18:47:09 chemphys vmunix: Pchip 0 Error Register
> = 0000000000000000
> Jan 30 18:47:09 chemphys vmunix: Pchip Error Register Decode:
> Jan 30 18:47:09 chemphys vmunix: PCI Xaction Start
> Address
> = 0000000000000000
> Jan 30 18:47:09 chemphys vmunix: PCI Command: Interrupt
> Acknowledge
> Jan 30 18:47:09 chemphys vmunix: Pchip 1 Base Address (phys)
> = 0000080380000000
> Jan 30 18:47:09 chemphys vmunix: Pchip 1 Error Register
> = 0000000000000000
> Jan 30 18:47:09 chemphys vmunix: Pchip Error Register Decode:
> Jan 30 18:47:09 chemphys vmunix: PCI Xaction Start
> Address
> = 0000000000000000
> Jan 30 18:47:09 chemphys vmunix: PCI Command: Interrupt
> Acknowledge
> Jan 30 18:47:10 chemphys vmunix: CPU 3 is prevented from being rebooted.
> Jan 30 18:47:10 chemphys vmunix: The system must be reset or power
> cycled to clear this state.
> Jan 30 18:47:10 chemphys vmunix: panic (cpu 3): Processor Machine Check
> Jan 30 18:47:10 chemphys vmunix: syncing disks... device string for dump
> = SCSI
> 1 2 0 0 0 0 0.
> Jan 30 18:47:10 chemphys vmunix: DUMP.prom: dev SCSI 1 2 0 0 0 0 0,
> block 524288Jan 30 18:47:10 chemphys vmunix: device string for dump =
> SCSI 1 2 0 0 0 0 0.
> Jan 30 18:47:10 chemphys vmunix: DUMP.prom: dev SCSI 1 2 0 0 0 0 0,
> block 524288Jan 30 18:47:10 chemphys vmunix: Alpha boot: available
> memory from 0x2e1a000 to
> 0x7fffc000
>
> I power cycled and rebooted, but it gave the same "too many Processor
> corrected errors" message a few times over a period of about four hours
> and again rebooted. The errors continue.
>
> Any idea what the specific problem is?
>
> Regards,
> Peter
>
> Peter Stern
> Chemical Physics Department
> Weizmann Institute of Science
> 76100 Rehovot, ISRAEL
>
> email: [email protected]
> phone: 972-8-9342096
> fax: 972-8-9344123
>
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.