Re: NSVC Electronics help
Bob Chappuis <[email protected]>
| Newsgroups | gmane.recreation.motorcycles.svrider.general |
|---|---|
| Message-ID | <[email protected]> |
Thanks, Fresh batts measure 1.5 failing batts measure 1.3 Calls for Alkaline. Failure occurs with both Akaline and Rechargeables. I think the rechargeables I have are the NiMH type not ni-cd. Thursday, February 23, 2006, 1:46:29 PM, you wrote: > have you measured the voltage of the battery pack fresh, and at failure (in circut)? > what type of batteries do they call for? are you perhaps using ni-cd batteries instead of alkaline? ni-cd nomnal voltage normally runs some 20% lower than that of alkalines. > if you're doing the right thing, i'd say, exchangt it, if possible, > ferenc > Steve Aronson <[email protected]> wrote: > > Behalf Of Bob Chappuis > Any thoughts >> on how to test, fix or engineer a work around? > Have you tried using some high quality NiMH rechargeables in it? The > voltage will be lower but the total energy available will be higher. At > least it will test your low voltage theory, and it might circumvent the > problem. > Steve > ------------------------------------------------- > For all your SV needs: http://www.svrider.com > To change your list settings or leave SV650-L, please visit http://www.hawkgt.com/sv650/lists.asp > ------------------------------------------------- > For all your SV needs: http://www.svrider.com > To change your list settings or leave SV650-L, please visit http://www.hawkgt.com/sv650/lists.asp Hi Ferenc Cheers, Bob ------------------------------------------------- For all your SV needs: http://www.svrider.com To change your list settings or leave SV650-L, please visit http://www.hawkgt.com/sv650/lists.asp