Re: Pics of Mikuni Jets and Needles (was Re: syncing carbies!

Thanks!! Beth
this will help me out. it's good to know they have the sizes stamped on
them. I'll pull the carbs and see what's what.


On 3/10/06, Beth <[email protected]> wrote:
>
> Bryant,
>
> Here are your pics:
>
> This is what a USA OEM needle (on the right) looks like  versus an
> aftermarket needle, such as a Factory or Dynojet needle (left). Notice
> the grooves in the aftermarket needle so you can put the clip in
> various positions, lowering or raising the needled as needed.
>
> Also, if you happen to have a Dynojet kit installed, they supply their
> own jets, which are different sizes than Mikuni sizes. You can tell
> the different in two ways - the size is stamped in a small, round font
> and the bottom of the jet, as pictured here, is flat.
>
> http://img.photobucket.com/albums/v301/beffie/Needles_and_Mains.jpg
>
> Here's a genuine Mikuni small round main jet. Notice the size stamped
> into the "head" that's in a largish, square font:
> http://img.photobucket.com/albums/v301/beffie/mikuni_main.jpg
>
> My camera is a piece of junk and I have no patience to fiddle with it
> right now but this will give you an idea.
>
> -Beth
> --
> "Newer computers aren't getting any smarter, they are just able to do
> stupid things at greater speeds." -Technomancy
>
> www.hacktastic.org - How 1997! I've gotta website!
>
> -------------------------------------------------
> For all your SV needs: http://www.svrider.com
>
> To change your list settings or leave SV650-L, please visit
> http://www.hawkgt.com/sv650/lists.asp
>



--
Bryant Wang
[email protected]

-------------------------------------------------
For all your SV needs: http://www.svrider.com

To change your list settings or leave SV650-L, please visit http://www.hawkgt.com/sv650/lists.asp