Re: Arc250 & BC250D question...

Ooops! Just read your post again and just realized you tried this...sorry
about that!

-Roger


On 1/14/06, Roger Strohmeyer <[email protected]> wrote:
>
> Hey James,
>
> The first thing you want to do before running the ARC250 software is press
> the MENU/BACK button on the 250, then choose number 3 which is System
> Option. Press the E for enter. Then choose number 5 which is PC control.
> Press E for enter. Then choose the baud rate and you should be good to go.
> After choosing your settings then just keep punching the MENU/BACK button
> until you get back to a normal screen. You should then be able to use the
> ARC250 software without any problems.
>
> Good luck!
>
> -Roger
>
>
>  On 1/13/06, jamezynj2003 <jamezynj2003-/[email protected]> wrote:
> >
> > I have Arc250 software v1.12 & the BC250D scanner.  I tried to hook up
> > the scanner on my laptop with the software & the USB - Serial converter.
> >
> >
> > The laptop recognized & installed the converter, but the ARC software
> > would not recognize the scanner.
> >
> > I thought v.1.12 was suposed to be compatible with the converter.  My
> > laptop does not have a serial port.
> >
> > Any suggestions?  (I did hit menu-3-5-& select a speed)
> >
> >
> >
> >
> >
> > If you have come here to find out about the 250D you have come to the
> > right place! In fact the discussion of the BC-250D and how it works is the
> > only acceptable topic on this list. Any discussion about anything other than
> > the BC-250D is OFF TOPIC. I hope this is clear to all group members..
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>


[Non-text portions of this message have been removed]



If you have come here to find out about the 250D you have come to the right place! In fact the discussion of the BC-250D and how it works is the only acceptable topic on this list. Any discussion about anything other than the BC-250D is OFF TOPIC. I hope this is clear to all group members.. 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/UnidenBC250D/

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/