Re: FREQ PROBLEMS
"billsfootball362" <[email protected]>
| Newsgroups | gmane.recreation.radio.hardware.bc250d |
|---|---|
| Message-ID | <[email protected]> |
You can pretty much put anything you want in those channels. I dont think you can put another trunking system in the same bank but any conventional channels will work. The scanner will read the trunked channels (ie id scan ) first and the read teh conventional frequencies next. Just be sure that when you program the trunked frequecies for Motorola type two that an "M" appears nect to the number when reviewing the channels on your scanner and a "C" for the conventional channels. Hope that was some help to you. "been there done that" --- In [email protected], "fkleb4040" <res71kav@v...> wrote: > > My question is you have 26 freq in motorola Type 2 uhf system, > channels 1-26 what freq do put in channels 26-100. > > Tanks Frank > If you have come here to find out about the 250D you have come to the right place! In fact the discussion of the BC-250D and how it works is the only acceptable topic on this list. Any discussion about anything other than the BC-250D is OFF TOPIC. I hope this is clear to all group members.. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/UnidenBC250D/ <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/