RE: Re: BCI25D Accessory Digital Card. BAUD RATE

i'll give u $25.00 cash for the card I need one..

  _____  

From: [email protected] [mailto:[email protected]] On
Behalf Of Pete
Sent: Friday, March 10, 2006 1:09 PM
To: [email protected]
Subject: [UnidenBC250D] Re: BCI25D Accessory Digital Card. BAUD RATE


Another very nice response.. Thank You..

I am basically getting the impression that the $100 digital card I 
purchased needs to go back because it will only be able to trunk the 
digital system if it is on a mixed-mode system, with the control 
channels at 3,600 baud.  If its 100% digital, I would not be able to 
hear control channels, therefore not be able to follow the trunk..

also, from what I understand, I should be able to HEAR the digital 
apco 25 signal but just not track the trunk unless its a mixed mode 
signal.. 

There I've gone and dove myself batty again.. 

does everyone agree??? (not on the batty part)  :)

Pete


--- In [email protected], "bwigg2002" <wa4gki@...> wrote:
>
> > I do know what baud rate is (when referring to PC
> > transfer speeds) 
> > but my question is... 
> >
> This refers to the signalling rate that the control channel uses. 
9600 
> baud pure digital systems transmit consideribly more data via the 
> control channel, hence the need for a higher baud rate. The BCI25D 
card 
> will decode the audio on 9600 baud system, but it will not follow 
> trunking. Project 25 phase I C4FM(Constant Envelope 4-Level 
Frequency 
> Modulation) IMBE audio channel information is transmitted 9600 
baud. 
> 4.4 kbps for audio with 2.8 kbps for error correction and 2.4 kbps 
for 
> signalling. This is the same for 3600 baud or 9600 baud systems. 
Some 
> systems use QPSK(quadrature phase shift keying)instead of C4FM. 
This is 
> part of Project 25 phase II for use on 6.25 khz channels. Not sure 
if 
> the BCI25D will work with QPSK audio.
>






If you have come here to find out about the 250D you have come to the right
place! In fact the discussion of the BC-250D and how it works is the only
acceptable topic on this list. Any discussion about anything other than the
BC-250D is OFF TOPIC. I hope this is clear to all group members.. 




SPONSORED LINKS 
Hobby
<http://groups.yahoo.com/gads?t=ms&k=Hobby&w1=Hobby&w2=Hobby+and+craft+suppl
y&w3=Craft+hobby&w4=Uniden+bearcat&w5=Bc250d&c=5&s=88&.sig=CdE2k1TKWYPhss6c3
lweIQ>  	Hobby
<http://groups.yahoo.com/gads?t=ms&k=Hobby+and+craft+supply&w1=Hobby&w2=Hobb
y+and+craft+supply&w3=Craft+hobby&w4=Uniden+bearcat&w5=Bc250d&c=5&s=88&.sig=
vXBMU0N9gxZeajQmScC3Ng> and craft supply 	Craft
<http://groups.yahoo.com/gads?t=ms&k=Craft+hobby&w1=Hobby&w2=Hobby+and+craft
+supply&w3=Craft+hobby&w4=Uniden+bearcat&w5=Bc250d&c=5&s=88&.sig=Gk1M24mm4Gm
MgGFzD_8-Rg> hobby 	
Uniden
<http://groups.yahoo.com/gads?t=ms&k=Uniden+bearcat&w1=Hobby&w2=Hobby+and+cr
aft+supply&w3=Craft+hobby&w4=Uniden+bearcat&w5=Bc250d&c=5&s=88&.sig=ioY8ipYN
mDHS-cgwkH4jRw> bearcat 	Bc250d
<http://groups.yahoo.com/gads?t=ms&k=Bc250d&w1=Hobby&w2=Hobby+and+craft+supp
ly&w3=Craft+hobby&w4=Uniden+bearcat&w5=Bc250d&c=5&s=88&.sig=cwqgRtAg3UWs7IJR
z0BTdA>  	

  _____  

YAHOO! GROUPS LINKS 


	
*	 Visit your group "UnidenBC250D
<http://groups.yahoo.com/group/UnidenBC250D> " on the web.
  

*	 To unsubscribe from this group, send an email to:
 [email protected]
<mailto:[email protected]?subject=Unsubscribe> 
  

*	 Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 


  _____  




[Non-text portions of this message have been removed]



If you have come here to find out about the 250D you have come to the right place! In fact the discussion of the BC-250D and how it works is the only acceptable topic on this list. Any discussion about anything other than the BC-250D is OFF TOPIC. I hope this is clear to all group members.. 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/UnidenBC250D/

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/