Re: BC296d card in BC250
"arcsoftware" <arcsoftware-/[email protected]>
| Newsgroups | gmane.recreation.radio.hardware.bc250d |
|---|---|
| Message-ID | <[email protected]> |
The card is 'only' the APCO25 voice decoder, the 3600/9600 baud control channel decoding is done by the scanner not the card. The BC250 firmware simply does not support 9600 decoding. The cards for BC250/296 are identical and can be swapped but a BC250 can never decode 9600 systems. Gommert www.butelsoftware.com --- In [email protected], "Sean" <vecomm@...> wrote: > > Further to the last message on the card not working on the 9600 baud systems, has anyone tried putting the BCi96 in the BC250d (i think its the bci25 that you could buy for the BC250 originally) and had it work on the normal APCO P25? as well as the 3600baud control? I think the card just decodes the digital audio no? > > [Non-text portions of this message have been removed] > If you have come here to find out about the 250D you have come to the right place! In fact the discussion of the BC-250D and how it works is the only acceptable topic on this list. Any discussion about anything other than the BC-250D is OFF TOPIC. I hope this is clear to all group members.. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/UnidenBC250D/ <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/