RE: Nine pin connector

Yes I did make a suggestion. Re - read the email.  " Check the Uniden site
for a USB-1 adapter, it goes from USB to Serial DB-9

for the cable you already have."

 

You might also find a USB cable there. However its probably cheaper to just
use the cable you have with the USB adapter. 

 

 

  _____  

From: [email protected] [mailto:[email protected]] On
Behalf Of T B
Sent: Monday, March 15, 2010 7:04 PM
To: [email protected]
Subject: RE: [UnidenBC250D] Nine pin connector

 

  

Yes you are right it is the monitor port.. Darn I do not have a nine pin
port on this laptop so it would be great if I could go from the usb to the
radio... any suggestions. 

--- On Mon, 3/15/10, Patrick - Used 2-Way <usedtwowayradios@
<mailto:usedtwowayradios%40yahoo.com> yahoo.com> wrote:

From: Patrick - Used 2-Way <usedtwowayradios@
<mailto:usedtwowayradios%40yahoo.com> yahoo.com>
Subject: RE: [UnidenBC250D] Nine pin connector
To: UnidenBC250D@ <mailto:UnidenBC250D%40yahoogroups.com> yahoogroups.com
Date: Monday, March 15, 2010, 7:00 PM

 

I believe your referring to the Monitor out port. Its for an external

display. 

Check the Uniden site for a USB-1 adapter, it goes from USB to Serial DB-9

for the cable you already have. 

_____ 

From: UnidenBC250D@ yahoogroups. com [mailto:UnidenBC250D@ yahoogroups. com]
On

Behalf Of T B

Sent: Monday, March 15, 2010 6:56 PM

To: UnidenBC250D@ yahoogroups. com

Subject: [UnidenBC250D] Nine pin connector

I have a new laptop that has more than a nine pin connector so the chord

from the pc to the radio will not fit. it is a fifteen pin port. 

Is there an accessory that will go from a USB port to the Uniden 250D.. the

program I use is on the laptop..any suggestions would be helpful. Must be

someway to hook into the radio. 

Many thanks

N5ITX

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]