Re: Nine pin connector

Actually, the USB-1 goes from a USB port to the scanner connector for 
newer scanners and won't work on the 250D. It has no DB-9 connector.

A USB-RS232 adapter will have to be used. They can be picked up on eBay 
for as little as $5 shipped.

Joe M.

Patrick - Used 2-Way wrote:
> I believe your referring to the Monitor out port. Its for an external
> display. 
> 
> Check the Uniden site for a USB-1 adapter, it goes from USB to Serial DB-9
> for the cable you already have. 
> 
>   _____  
> 
> From: [email protected] [mailto:[email protected]] On
> Behalf Of T B
> Sent: Monday, March 15, 2010 6:56 PM
> To: [email protected]
> Subject: [UnidenBC250D] Nine pin connector
> 
>  
> 
>   
> 
> I have a new laptop that has more than a nine pin connector so the chord
> from the pc to the radio will not fit. it is a fifteen pin port. 
> 
> Is there an accessory that will go from a USB port to the Uniden 250D.. the
> program I use is on the laptop..any suggestions would be helpful. Must be
> someway to hook into the radio. 
> Many thanks
> N5ITX
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> ------------------------------------
> 
> If you have come here to find out about the 250D you have come to the right place! In fact the discussion of the BC-250D and how it works is the only acceptable topic on this list. Any discussion about anything other than the BC-250D is OFF TOPIC. I hope this is clear to all group members..Yahoo! Groups Links
> 
> 
> 
> 
> ------------------------------------------------------------------------
> 
> 
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 9.0.783 / Virus Database: 271.1.1/2746 - Release Date: 03/14/10 03:33:00
>