Re: Nine pin connector

Well Clark, got the USB to 239 adaptor and have hooked it up to the BC250D.. using the Arc software.. will not recognize the scanner so I can program... any suggestions. I tried all of the ports and used the auto detect all to no avail. THanks
BT
N5ITX

--- On Mon, 3/15/10, Clark Rennie <[email protected]> wrote:

From: Clark Rennie <[email protected]>
Subject: Re: [UnidenBC250D] Nine pin connector
To: [email protected]
Date: Monday, March 15, 2010, 7:18 PM







 



  


    
      
      
      That 15 pin connector is not a serial port, it's for a monitor.

If you have the serial cable that came with BCD 250 go here for an adapter 

USB cable.

http://www.amazon. com/Serial- RS-232-Adapter- Office-Product/ dp/B000BI95W0/ ref=pd_rhf_ p_t_1



Clark



At 04:55 PM 3/15/2010, you wrote:



>I have a new laptop that has more than a nine pin connector so the chord 

>from the pc to the radio will not fit. it is a fifteen pin port.

>

>Is there an accessory that will go from a USB port to the Uniden 250D.. 

>the program I use is on the laptop..any suggestions would be helpful. Must 

>be someway to hook into the radio.

>Many thanks

>N5ITX





    
     

    
    


 



  






      

[Non-text portions of this message have been removed]