Re: Nine pin connector

Yep, the device manager had the USB locked out,,, now it is talking to the scanner..Now if I can only remember how to program it again.. lol going to be a problem.. Thank you so much for your help..
BT

--- On Tue, 3/16/10, Clark Rennie <[email protected]> wrote:

From: Clark Rennie <[email protected]>
Subject: Re: [UnidenBC250D] Nine pin connector
To: [email protected]
Date: Tuesday, March 16, 2010, 7:59 PM







 



  


    
      
      
      Did the adapter come with an adapter ? If not contact the buyer and get one 

for it.

Then look in the Device Manager for the adapter.



Clark



At 05:12 PM 3/16/2010, you wrote:



>Well Clark, got the USB to 239 adaptor and have hooked it up to the 

>BC250D.. using the Arc software.. will not recognize the scanner so I can 

>program... any suggestions. I tried all of the ports and used the auto 

>detect all to no avail. THanks

>BT

>N5ITX

>

>--- On Mon, 3/15/10, Clark Rennie <c.rennie1@verizon. net> wrote:

>

>From: Clark Rennie <c.rennie1@verizon. net>

>Subject: Re: [UnidenBC250D] Nine pin connector

>To: UnidenBC250D@ yahoogroups. com

>Date: Monday, March 15, 2010, 7:18 PM





    
     

    
    


 



  






      

[Non-text portions of this message have been removed]