Re: Battery Icon Flashing After Full Charge?
"Donald Bryant" <kb4rrc-/[email protected]>
| Newsgroups | gmane.recreation.radio.hardware.uniden.bc245xlt |
|---|---|
| Message-ID | <[email protected]> |
I have the same problem with a year old Duracell 2700 mah battery pack apparently not charging like it should as the scanner beeps after an hour of listening. I measured the 7.6 volt charge and I decided that maybe I needed to go BACKWARD in Battery and capacity. I purchase 4 1000mah NiCd Batteries and built my own pack. NiCd takes less time to charge and possibly since the batteries were such a high capacity that even a day was not the most efficient charge of the battery pack. I can get by with 1000 mah vs 2700mah and if its more efficient it will last me longer anyway. IF This is not the case I will post an update as I just installed the new batteries and have them on charge... Also the purchased stock cells are easier to hotmelt glue than the store branded stuff as the stock cells plastic is thicker and will not melt as fast. ------------------------------------ Enjoy the list ! No flames please! Please Keep it on topic! Post message: [email protected] Subscribe: [email protected] Unsubscribe: [email protected] List owner: [email protected] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BC245XLT/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/BC245XLT/join (Yahoo! ID required) <*> To change settings via email: mailto:[email protected] mailto:[email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/