Re: trunk tracking.

--- In [email protected], Chuck44@... wrote:
>
> There might be a firmware update, but that wouldn't be the cause of
your problem.
> Have you ever had success at scanning trunked systems?
> If so, this system may have changed. If not, it may be you're just
not programming
> it right somehow.
> Is it Type 1 or 2, or EDACS?
> 
> At 12/27/2008 21:20 +0000, ME wrote the following:
>  
> >That would be great, do you know if there is an update for it or 
> >something....
>
 It is type 2, and I have used it before and then I got the BC246T and
I gave the 245 to my grandmother and when i tried to program it it
would not work.  I used the same info as i did for the bc246.
Everything goes in fine, but as soon as I hit scan or search it does
nothing and i see the frequencies scanning but its all quite and it
does not stop on the control channels at all.


------------------------------------

Enjoy the list ! No flames please!
Please Keep it on topic!
 
   Post message:    [email protected] 
   Subscribe:       [email protected] 
   Unsubscribe:     [email protected] 
   List owner:      [email protected] 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BC245XLT/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BC245XLT/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:[email protected] 
    mailto:[email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/