Re: com port

At 1/21/2012 16:25 -0800, Tom Humes wrote the following:
 
>I read the manual twice and there was no mention that it is even set up for COM1

You need to try Peter Duffy's suggestion:

At 1/21/2012 19:16 -0500, Peter Duffy wrote the following:
 
>Change the adapter port, go into your device manager on your computer within
>control panel. Find ports, then USB to Serial dig down and select the port
>you want. After complete you may have to unplug the adapter and plug it
>back in but it will switch ports. This scanner and for that matter the new
>ones don't know what port you plug them into as that is assigned by the
>computer not the radio. You must set it in the control panel and device
>manager on the PC.




------------------------------------

Enjoy the list ! No flames please!
Please Keep it on topic!
 
   Post message:    [email protected] 
   Subscribe:       [email protected] 
   Unsubscribe:     [email protected] 
   List owner:      [email protected] 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BC245XLT/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BC245XLT/join
    (Yahoo! ID required)

<*> To change settings via email:
    [email protected] 
    [email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/