Re: Scanning Conventional / Trunk Banks BC785D

--- In [email protected], "ke4vpe" <ke4vpe@y...> wrote:
> Hi,
> 
> Does anyone know the procedure that would allow me to activate a 
> conventional Bank while scanning a Trunk Bank on the BC785D.  If I am 
> scanning only one Trunk Bank with all 10 ID lists programmed, how do I 
> add a Conventional Bank to scan?  ie.  If I am scanning Bank 1 
> (Trunked) and all 10 lists are programmed, and I would like to scan 
> Bank 2 (Conventional)along with Bank 1, what buttons do I press to add 
> Bank 2.  Currently when I press the "2" button to attempt to add Bank 
> 2, the ID List 2 is removed and the Bank 2 is not added.  When I tried 
> this, I was scanning in the Scan ID mode.  Any help would be 
> appreciated.
> 
> Thanks,
> 
> RC

Press the period (.) Bank 1 should be flashing on line 3.  Press 2.

Frank




If you have come here to find out about the 785D you have come to the right place! In fact the discussion of the BC-785D and how it works is the only acceptable topic on this list. Any discussion about anything other than the BC-785D is OFF TOPIC. I hope this is clear to all group members..