Re: Scanning Conventional / Trunk Banks BC785D

Frank,

Thanks.  It works.  I also discovered that if I change to the Search 
ID mode, I could add Conventional Banks.

RC


--- In [email protected], "fmonx" <fmonx@y...> wrote:
> --- In [email protected], "ke4vpe" <ke4vpe@y...> wrote:
> > Hi,
> > 
> > Does anyone know the procedure that would allow me to activate a 
> > conventional Bank while scanning a Trunk Bank on the BC785D.  If 
I am 
> > scanning only one Trunk Bank with all 10 ID lists programmed, 
how do I 
> > add a Conventional Bank to scan?  ie.  If I am scanning Bank 1 
> > (Trunked) and all 10 lists are programmed, and I would like to 
scan 
> > Bank 2 (Conventional)along with Bank 1, what buttons do I press 
to add 
> > Bank 2.  Currently when I press the "2" button to attempt to add 
Bank 
> > 2, the ID List 2 is removed and the Bank 2 is not added.  When I 
tried 
> > this, I was scanning in the Scan ID mode.  Any help would be 
> > appreciated.
> > 
> > Thanks,
> > 
> > RC
> 
> Press the period (.) Bank 1 should be flashing on line 3.  Press 2.
> 
> Frank




If you have come here to find out about the 785D you have come to the right place! In fact the discussion of the BC-785D and how it works is the only acceptable topic on this list. Any discussion about anything other than the BC-785D is OFF TOPIC. I hope this is clear to all group members..