Re: Schematic or shop manual?

ok thank you for those replies. 

--- In [email protected], "James F. Boehner MD" <jboehner01@...> wrote:
>
> Just FYI-
> 
> Although there may be schematics available now, Uniden did not release schematics on their scanners due to the ECPA prohibition on analog cellphone monitoring.  Their scanners were capable of what was called "virtual downconversion" where analog cell phones could be monitored on different frequencies within the scanner.  This required a simple modification and the addition of a switch.  This is the same reason why you may see epoxy covering part of the circuit  board.  This was to cover the areas where modifications would be done, and prevent the mods from being performed.
> 
> '73 de JIM N2ZZ
> Listowner
> 
> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On Behalf Of WW9E@...
> Sent: Friday, March 01, 2013 6:57 PM
> To: [email protected]
> Subject: Re: [UnidenBC785D] Schematic or shop manual?
> 
> Did you check Mods.dk?
>  
>  
> In a message dated 3/1/2013 5:49:20 P.M. Eastern Standard Time, hffreek@... writes:
> 
>  
>  
>  
> I searched and just cannot find a schamatic for this scanner-anyone happen  
> to have one to copy? thanks:)
> 
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> ------------------------------------
> 
> If you have come here to find out about the 785D you have come to the right place! In fact the discussion of the BC-785D and how it works is the only acceptable topic on this list. Any discussion about anything other than the BC-785D is OFF TOPIC. I hope this is clear to all group members..
> 
> 
> Community email addresses:
> [email protected]
> 
> Yahoo! Groups Links
>




------------------------------------

If you have come here to find out about the 785D you have come to the right place! In fact the discussion of the BC-785D and how it works is the only acceptable topic on this list. Any discussion about anything other than the BC-785D is OFF TOPIC. I hope this is clear to all group members..