Re: Entering of a trunking system into PROSCAN then scanner

I have a 785 and yes it will work as long as you have the app code 25 digit=
al card installed in your scanner and the frequency has not been rebanded. =
As far as a restaurant you're talking about I'm not real sure.

Sent from my MOTOROLA BRAVO=E2=84=A2 on Consumer Cellular

-----Original message-----
From: MCH <[email protected]>
To: [email protected]
Sent: Thu, Aug 15, 2013 04:36:44 GMT+00:00
Subject: Re: [UnidenBC785D] Entering of a trunking system into PROSCAN then=
 scanner

Not sure what you mean by 1-1, 1-2, and 10-6. All the TGs should be in=20
decimal form such as 496, 528, and 3184.

That said, I wouldn't worry about getting it to work correctly, as they=20
will be soon upgrading the system to P25 which means your 785 won't work=20
on it.

Sorry for the bad news...

Joe M.

maccrimmon wrote:
> I have had scanners for a long time.  Think crystals.  This is my first t=
runking scanner and I am massively confused.  I recently moved to Fayette c=
ounty PA and want to enter their trunking system.=20=20
>=20
> This is what I believe to be true about the system, from RadioReference.C=
om:
>=20
> Motorola type 2 SmartNet
> 800 Mhz
>=20
> The talk groups are entered into the Trunk List tab.=20=20
> 1-1 =3D dec 496 MA14 Mutual Aid
> 1-2 =3D dec 528 MA15 Mutual Aid
>    and so on down to=20
> 10-6 =3D dec 3184 BORO SW PW Municipal Public Works - SW Boroughs
>=20
> OK, if that part is good, now on the Trunk Bank Setting tab on ProScan, w=
hat do I put in the Control Channel drop-down selection? Off, Plan 1,2,3 or=
 4, or nothing?
>=20
> And do I enter the frequencies in the Frequencies tab in ProScan?  Where =
do the control freqs. get entered?
>=20
> Thank you for the help.
>=20
>=20
>=20
>=20
> ------------------------------------
>=20
> If you have come here to find out about the 785D you have come to the rig=
ht place! In fact the discussion of the BC-785D and how it works is the onl=
y acceptable topic on this list. Any discussion about anything other than t=
he BC-785D is OFF TOPIC. I hope this is clear to a


[Non-text portions of this message have been removed]



------------------------------------

If you have come here to find out about the 785D you have come to the right=
 place! In fact the discussion of the BC-785D and how it works is the only =
acceptable topic on this list. Any discussion about anything other than the=
 BC-785D is OFF TOPIC. I hope this is clear to all group members..