Re: Entering of a trunking system into PROSCAN then scanner

Not sure what you mean by 1-1, 1-2, and 10-6. All the TGs should be in 
decimal form such as 496, 528, and 3184.

That said, I wouldn't worry about getting it to work correctly, as they 
will be soon upgrading the system to P25 which means your 785 won't work 
on it.

Sorry for the bad news...

Joe M.

maccrimmon wrote:
> I have had scanners for a long time.  Think crystals.  This is my first trunking scanner and I am massively confused.  I recently moved to Fayette county PA and want to enter their trunking system.  
> 
> This is what I believe to be true about the system, from RadioReference.Com:
> 
> Motorola type 2 SmartNet
> 800 Mhz
> 
> The talk groups are entered into the Trunk List tab.  
> 1-1 = dec 496 MA14 Mutual Aid
> 1-2 = dec 528 MA15 Mutual Aid
>    and so on down to 
> 10-6 = dec 3184 BORO SW PW Municipal Public Works - SW Boroughs
> 
> OK, if that part is good, now on the Trunk Bank Setting tab on ProScan, what do I put in the Control Channel drop-down selection? Off, Plan 1,2,3 or 4, or nothing?
> 
> And do I enter the frequencies in the Frequencies tab in ProScan?  Where do the control freqs. get entered?
> 
> Thank you for the help.
> 
> 
> 
> 
> ------------------------------------
> 
> If you have come here to find out about the 785D you have come to the right place! In fact the discussion of the BC-785D and how it works is the only acceptable topic on this list. Any discussion about anything other than the BC-785D is OFF TOPIC. I hope this is clear to all group members..
> 
> 
> Community email addresses:
> [email protected]
> 
> Yahoo! Groups Links
> 
> 
> 
> 


------------------------------------

If you have come here to find out about the 785D you have come to the right place! In fact the discussion of the BC-785D and how it works is the only acceptable topic on this list. Any discussion about anything other than the BC-785D is OFF TOPIC. I hope this is clear to all group members..