Re: Newbie Question..
"Robert Downs" <[email protected]>
| Newsgroups | gmane.recreation.radio.hardware.uniden.bc785d |
|---|---|
| Message-ID | <[email protected]> |
Check and make sure you have both the frequencys marked as trunk and also make sure you have the bank set to trunk with the right mode. Motorola, Edacs or LTR and if the bank 2 is motorola make sure the bank is set for the correct type of motorola. Type 1, Type II and the correct bank. Your edacs bank should be Edacs wide and the frequencys FM not NFM. Set the bank tags option for AFS. Without knowing what system or frequencys your trying I can't tell you much more, also the best way to do it is with a pc and program. ARC250 Pro is the best around and they have a demo. I think the demo will only let you upload bank 1 to the sacnner, but its eaiser to see all the options in the software that need to be set in the scanner than truning and pushing all those buttons hi hi... --- In [email protected], "Jeff" <rofd63@o...> wrote: > > > Just started programming my new 785d after many years of using > conventional based scanners and have found that only bank 1 will > trunk. ------------------------ Yahoo! Groups Sponsor --------------------~--> Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar. Now with Pop-Up Blocker. Get it for free! http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/DLTolB/TM --------------------------------------------------------------------~-> If you have come here to find out about the 785D you have come to the right place! In fact the discussion of the BC-785D and how it works is the only acceptable topic on this list. Any discussion about anything other than the BC-785D is OFF TOPIC. I hope this is clear to all group members..