Re: help: s-meter full scale !

Hi all !


My radio does somewhat the opposite to yours : I can never get my s-
meter to full scale no matter how strong the signal is. This occured 
after getting the double line on the bandscope. I still have to find 
a fix for this problem as there is no authorize Yaesu Repair 
facilities in my country.

Try this procedure. It's the one for curing the Double Line in the 
Bandscope problem; it might help.

ATT 0ff (Func + 8)
Enter Menu (Func + ent)
Menu items 5, 6, & 19 set to off
Menu items #23 anything but off, #10 Key beep On
Menu item 1 in Manual 
Make sure in NFM
Enter 1250.375 followed by enter
Func + 5 (long press)
Then choose menu 1 (press 1)
Enter 123.125 followed by enter
Func + 5 (long press)
Choose menu 2 (press 2)
Enter 448.25 followed by Enter
Func +5 (long press)
Choose Menu 3 (press 3)
Battery icon should be flashing ... if not restart the procedure 
until it does !!
Tune strong station on NFM
Func + 9 (S meter set)appears
Func + 1 (S meter +) appears
Press BS ( a beep will be heard)
Tune a weak station on NFM : scanner with no antenna and flat batts 
in handi talkie ;-)
Func + 2
Press BS until beep is heard 
Press CLR (VR500 restarts) 

Dennis Ls. M. Cruz  DV7-BJY
Bohol Island, the Philippines





------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/ELTolB/TM
--------------------------------------------------------------------~-> 

Post message:         [email protected] 
Subscribe:            [email protected] 
Unsubscribe:          [email protected] 
List owner:           [email protected] 





Ejoy the list!! 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/VR-500/

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/