Re: SP pin connection wanted.
"shakennotstirred123" <[email protected]>
| Newsgroups | gmane.recreation.radio.hardware.yaesu.vr-500 |
|---|---|
| Message-ID | <[email protected]> |
The VX-2R has a 4-conductor audio jack. This one jack has to do transmit and receive audio, PTT, and programming. I don't know if it will also accept a stereo plug, so be sure that is really what you have. If the plug you referred to is a 3-conductor stereo plug, it should work in the VR-500. As you mentioned, you might have to solder the correct pin assignment, but then using 1/2 of a cheap or old pair of earbuds is probably easier, as would the use of a stereo/mono adapter be that someone mentioned in an earlier message. --- In [email protected], calvin klein laurent <laurentlau@...> wrote: > > thx for the feedback, Can I use the VX-2R 3.5mm stereo plug and solder the correct pin assignment. Where can i get the correct info. ------------------------ Yahoo! Groups Sponsor --------------------~--> Yahoo! Groups gets a make over. See the new email design. http://us.click.yahoo.com/XISQkA/lOaOAA/yQLSAA/ELTolB/TM --------------------------------------------------------------------~-> Post message: [email protected] Subscribe: [email protected] Unsubscribe: [email protected] List owner: [email protected] Ejoy the list!! Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/VR-500/ <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/