RE: Re: Headphone socket

Voi,

Thanks very much for this information, I had no idea.

Chuck


Original Message:
-----------------
From: voip10 [email protected]
Date: Mon, 25 May 2009 20:31:24 -0000
To: [email protected]
Subject: [VR-500] Re: Headphone socket


The VR-500 headphone jack socket is dual purpose, it is a "stereo" 
socket used for mono audio and for programming data. For audio you 
will need to use a stereo jack plug in the socket, with the audio 
connections between the outer sleeve and tip. The inner sleeve is 
used for data. A mono plug will ground the data connection causing problems
with the rig. Hope this helps. 

Voi

--- In [email protected], "qantas7472003" <chris.jordan7@...> wrote:
>
> Does anyone have a problem with this. Using a mono-stereo adapter to
listen with, I have now got a problem with the plug not making contact
properly, therefore missing some of what is going on. 
> I've read that it does seem to a bit of an achilles heel with this model,
don't know whether its dodgy solder or sticking contact in the socket. Any
help, please.
>




--------------------------------------------------------------------
myhosting.com - Premium Microsoft® Windows® and Linux web and application
hosting - http://link.myhosting.com/myhosting