Re: VR 5000 Service Manual - Need Help!

Hello Sherman, Michel and friends.
I cannot receive signals below 1.8MHz. I suspect the problem is D2021 or BPF (L2030, L2033...).

Well... how may i find it on the circuit board? I downloaded the board drawing from www.radioamateur.eu but it was blurred.

Any friend may help me?

Thanks,
Eduardo - PY1EB.
Rio de Janeiro / Brazil.

_________________________________________________________

#2592 From: "swe65724" <ess_consultants@...> 
Date: Wed Jul 28, 2004 9:27 pm 
Subject: VR 5000 Service Manual - Need Help!  swe65724 
 Offline 
 Send Email  
  I own 2 (two) of the VR 5000's. I have sent one of the to the factory
twice to repair the same failure. This time while the first radio was
in the factory, the second failed in exactly the same manner. What I
need is for someone to fax me a partial copy of the schematic showing
the location on the failed parts and what they are.

The factory list shows the parts locations/s:D202s,Q2045 and
associates the repair with the Main Unit.

Any help will be greatly appreciated


Sherman W. Ellis
swe65724
ess_consultants@...

 


Reply  
#2627 From: "michel_vr5k" <s-p-a-m_this_one@...> 
Date: Mon Sep 6, 2004 10:35 pm 
Subject: Re: VR 5000 Service Manual - Need Help!  michel_vr5k 
 Offline 
 Send Email  
  --- In [email protected], "swe65724" <ess_consultants@p...>
wrote: What I need is for someone to fax me a partial copy of the
schematic showing the location on the failed parts and what they are.

Everything is 3 clicks away within this forum:
"Files", "VR-5000 FCC Docs", then "schem_1.pdf "and following.

Those files are the very detailed schematics that I made posted years
ago by a friend. Altough we still do not have the corresponding
layouts, a good electronician finds its way.

Michel