Re: no ssb

Yes two years ago.They are going to get hammered by me over the same problem.I have herd that the reciever is no longer made.I hope I can get it repaired.Mine is in mint condition.Mine is also of frequency not by much.Thanks for getting back to me.I am going to call them first thing on Monday.Thanks Again Chris NM3M

--- In [email protected], "purple99popcorn" <mdoyle@...> wrote:
>
> I have the same problem, posted a few weeks ago but I got no response. In the mean time I opened it up, acquired a schematic and started troubleshooting. I am pretty sure the active mixer they used as a product detector is bad. I see the 455kHz IF signal up to the mixer the BFO oscillators for USB and LSB are working but I get no output. Just to be sure I injected an audio signal at the mixer output and heard it loud and clear in the speaker. The part is no longer made but you can get them on Ebay. The replacement is in transit so I'll let you know how it goes when it gets here. It is one of the few through-hole parts on the board so it should be easy to swap it out. I hope.
> 
> I got mine from a friend who only used it on FM. When I first tuned the 20M band I heard signals but they were weak and distorted. Shortly after that I heard nothing at all on USB/LSB/CW. 
> 
> Has this problem happened to your radio before?
> 
> --- In [email protected], "chrisnm3m" <nm3m@> wrote:
> >
> > The ssb in the radio is not working again.Has this happened to anyone in the group?I cant remember what they did to fix it.Thanks NM3M
> >
>