Re: Unable to compile rlib 1.3.0 Opteron 64 bit CPU
"Billy Shaw" <[email protected]>
| Newsgroups | gmane.text.rlib.user |
|---|---|
| Message-ID | <[email protected]> |
Hi,
Thank you for the suggestion. I just tried it. It created a new set of
erorrs during make. Before running make again, I did a make clean, make
distclean, and ran ./configure --with-pythonver=2.4 again.
[foo rlib-1.3.0]$ make
make all-recursive
make[1]: Entering directory `/usr/ftp/rlib-1.3.0'
Making all in libsrc
make[2]: Entering directory `/usr/ftp/rlib-1.3.0/libsrc'
source='parsexml.c' object='parsexml.lo' libtool=yes \
depfile='.deps/parsexml.Plo' tmpdepfile='.deps/parsexml.TPlo' \
depmode=gcc3 /bin/sh ../depcomp \
/bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
-I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I /usr/include
-I /usr/local/include/python2.4 -g -O2 -c -o parsexml.lo `test -f
'parsexml.c' || echo './'`parsexml.c
mkdir .libs
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
-O2 -c parsexml.c -MT parsexml.lo -MD -MP -MF .deps/parsexml.TPlo -fPIC
-DPIC -o .libs/parsexml.o
source='reportgen.c' object='reportgen.lo' libtool=yes \
depfile='.deps/reportgen.Plo' tmpdepfile='.deps/reportgen.TPlo' \
depmode=gcc3 /bin/sh ../depcomp \
/bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
-I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I /usr/include
-I /usr/local/include/python2.4 -g -O2 -c -o reportgen.lo `test -f
'reportgen.c' || echo './'`reportgen.c
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
-O2 -c reportgen.c -MT reportgen.lo -MD -MP -MF .deps/reportgen.TPlo
-fPIC -DPIC -o .libs/reportgen.o
source='layout.c' object='layout.lo' libtool=yes \
depfile='.deps/layout.Plo' tmpdepfile='.deps/layout.TPlo' \
depmode=gcc3 /bin/sh ../depcomp \
/bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
-I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I /usr/include
-I /usr/local/include/python2.4 -g -O2 -c -o layout.lo `test -f
'layout.c' || echo './'`layout.c
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
-O2 -c layout.c -MT layout.lo -MD -MP -MF .deps/layout.TPlo -fPIC -DPIC
-o .libs/layout.o
source='api.c' object='api.lo' libtool=yes \
depfile='.deps/api.Plo' tmpdepfile='.deps/api.TPlo' \
depmode=gcc3 /bin/sh ../depcomp \
/bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
-I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I /usr/include
-I /usr/local/include/python2.4 -g -O2 -c -o api.lo `test -f
'api.c' || echo './'`api.c
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
-O2 -c api.c -MT api.lo -MD -MP -MF .deps/api.TPlo -fPIC -DPIC -o
.libs/api.o
source='resolution.c' object='resolution.lo' libtool=yes \
depfile='.deps/resolution.Plo' tmpdepfile='.deps/resolution.TPlo' \
depmode=gcc3 /bin/sh ../depcomp \
/bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
-I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I /usr/include
-I /usr/local/include/python2.4 -g -O2 -c -o resolution.lo `test
-f 'resolution.c' || echo './'`resolution.c
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
-O2 -c resolution.c -MT resolution.lo -MD -MP -MF .deps/resolution.TPlo
-fPIC -DPIC -o .libs/resolution.o
source='util.c' object='util.lo' libtool=yes \
depfile='.deps/util.Plo' tmpdepfile='.deps/util.TPlo' \
depmode=gcc3 /bin/sh ../depcomp \
/bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
-I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I /usr/include
-I /usr/local/include/python2.4 -g -O2 -c -o util.lo `test -f
'util.c' || echo './'`util.c
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
-O2 -c util.c -MT util.lo -MD -MP -MF .deps/util.TPlo -fPIC -DPIC -o
.libs/util.o
source='pcode.c' object='pcode.lo' libtool=yes \
depfile='.deps/pcode.Plo' tmpdepfile='.deps/pcode.TPlo' \
depmode=gcc3 /bin/sh ../depcomp \
/bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
-I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I /usr/include
-I /usr/local/include/python2.4 -g -O2 -c -o pcode.lo `test -f
'pcode.c' || echo './'`pcode.c
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
-O2 -c pcode.c -MT pcode.lo -MD -MP -MF .deps/pcode.TPlo -fPIC -DPIC -o
.libs/pcode.o
pcode.c: In function `rlib_new_operand':
pcode.c:279: warning: cast to pointer from integer of different size
pcode.c: At top level:
pcode.c:655: error: conflicting types for 'rlib_value_new_number'
pcode.h:172: error: previous declaration of 'rlib_value_new_number' was here
pcode.c:655: error: conflicting types for 'rlib_value_new_number'
pcode.h:172: error: previous declaration of 'rlib_value_new_number' was here
make[2]: *** [pcode.lo] Error 1
make[2]: Leaving directory `/usr/ftp/rlib-1.3.0/libsrc'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/ftp/rlib-1.3.0'
make: *** [all] Error 2
[foo rlib-1.3.0]$
> Hi,
>
> Just comment out or remove line 37 in util.c
>
> I also noticed you don't have php-devel installed. You might want to
> install that if you want php support to work
>
> - bob
>
>> Hello,
>>
>> I am trying to compile rlib 1.3.0 on a server with dual AMD Opteron (tm)
>> Processor 848 (64 bit) CPU's running Red Hat Enterprise Linux AS
>> (version
>> 3 update 2).
>>
>> Info about server:
>> [foo rlib-1.3.0]$ uname -a
>> Linux host.somewhere.com 2.4.21-15.ELsmp #1 SMP Thu Apr 22 00:09:01 EDT
>> 2004 x86_64 x86_64 x86_64 GNU/Linux
>> [foo rlib-1.3.0]$
>>
>> I am using GNU Make 3.8.0, gcc version 3.4.3. The configure script works
>> fine (see output below), but make gives an error about conflicting types
>> for llabs. I have tried enabling and disabling various options availble
>> to
>> configure (disabling everything) and still get the error.
>>
>> Any help to get this compiled would be greatly appreciated.
>>
>>
>>
>> Output of configure:
>> [foo rlib-1.3.0]$ ./configure --with-pythonver=2.4
>> checking for a BSD-compatible install... /usr/bin/install -c
>> checking whether build environment is sane... yes
>> checking for gawk... gawk
>> checking whether make sets $(MAKE)... yes
>> checking whether to enable maintainer-specific portions of Makefiles...
>> no
>> checking for gcc... gcc
>> checking for C compiler default output file name... a.out
>> checking whether the C compiler works... yes
>> checking whether we are cross compiling... no
>> checking for suffix of executables...
>> checking for suffix of object files... o
>> checking whether we are using the GNU C compiler... yes
>> checking whether gcc accepts -g... yes
>> checking for gcc option to accept ANSI C... none needed
>> checking for style of include used by make... GNU
>> checking dependency style of gcc... gcc3
>> checking whether make sets $(MAKE)... (cached) yes
>> checking for a BSD-compatible install... /usr/bin/install -c
>> checking build system type... x86_64-redhat-linux-gnu
>> checking host system type... x86_64-redhat-linux-gnu
>> checking for a sed that does not truncate output... /bin/sed
>> checking for egrep... grep -E
>> checking for ld used by gcc... /usr/bin/ld
>> checking if the linker (/usr/bin/ld) is GNU ld... yes
>> checking for /usr/bin/ld option to reload object files... -r
>> checking for BSD-compatible nm... /usr/bin/nm -B
>> checking whether ln -s works... yes
>> checking how to recognise dependent libraries... pass_all
>> checking how to run the C preprocessor... gcc -E
>> checking for ANSI C header files... yes
>> checking for sys/types.h... yes
>> checking for sys/stat.h... yes
>> checking for stdlib.h... yes
>> checking for string.h... yes
>> checking for memory.h... yes
>> checking for strings.h... yes
>> checking for inttypes.h... yes
>> checking for stdint.h... yes
>> checking for unistd.h... yes
>> checking dlfcn.h usability... yes
>> checking dlfcn.h presence... yes
>> checking for dlfcn.h... yes
>> checking for g++... g++
>> checking whether we are using the GNU C++ compiler... yes
>> checking whether g++ accepts -g... yes
>> checking dependency style of g++... gcc3
>> checking how to run the C++ preprocessor... g++ -E
>> checking for g77... g77
>> checking whether we are using the GNU Fortran 77 compiler... yes
>> checking whether g77 accepts -g... yes
>> checking the maximum length of command line arguments... 32768
>> checking command to parse /usr/bin/nm -B output from gcc object... ok
>> checking for objdir... .libs
>> checking for ar... ar
>> checking for ranlib... ranlib
>> checking for strip... strip
>> checking if gcc static flag works... yes
>> checking if gcc supports -fno-rtti -fno-exceptions... no
>> checking for gcc option to produce PIC... -fPIC
>> checking if gcc PIC flag -fPIC works... yes
>> checking if gcc supports -c -o file.o... yes
>> checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports
>> shared libraries... yes
>> checking whether -lc should be explicitly linked in... no
>> checking dynamic linker characteristics... GNU/Linux ld.so
>> checking how to hardcode library paths into programs... immediate
>> checking whether stripping libraries is possible... yes
>> checking for shl_load... no
>> checking for shl_load in -ldld... no
>> checking for dlopen... no
>> checking for dlopen in -ldl... yes
>> checking whether a program can dlopen itself... yes
>> checking whether a statically linked program can dlopen itself... yes
>> checking if libtool supports shared libraries... yes
>> checking whether to build shared libraries... yes
>> checking whether to build static libraries... no
>> configure: creating libtool
>> appending configuration tag "CXX" to libtool
>> checking for ld used by g++... /usr/bin/ld -m elf_x86_64
>> checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
>> checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports
>> shared libraries... yes
>> checking for g++ option to produce PIC... -fPIC
>> checking if g++ PIC flag -fPIC works... yes
>> checking if g++ supports -c -o file.o... yes
>> checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports
>> shared libraries... yes
>> checking dynamic linker characteristics... GNU/Linux ld.so
>> checking how to hardcode library paths into programs... immediate
>> checking whether stripping libraries is possible... yes
>> checking for shl_load... (cached) no
>> checking for shl_load in -ldld... (cached) no
>> checking for dlopen... (cached) no
>> checking for dlopen in -ldl... (cached) yes
>> checking whether a program can dlopen itself... (cached) yes
>> checking whether a statically linked program can dlopen itself...
>> (cached)
>> yes
>> appending configuration tag "F77" to libtool
>> checking if libtool supports shared libraries... yes
>> checking whether to build shared libraries... yes
>> checking whether to build static libraries... no
>> checking for g77 option to produce PIC... -fPIC
>> checking if g77 PIC flag -fPIC works... yes
>> checking if g77 supports -c -o file.o... yes
>> checking whether the g77 linker (/usr/bin/ld -m elf_x86_64) supports
>> shared libraries... yes
>> checking dynamic linker characteristics... GNU/Linux ld.so
>> checking how to hardcode library paths into programs... immediate
>> checking whether stripping libraries is possible... yes
>> checking for exit in -lc... yes
>> checking for exp in -lm... yes
>> checking for pkg-config... /usr/local/bin/pkg-config
>> checking for libxml-2.0 >= 2.6.0... yes
>> checking LIBXML_CFLAGS... -I/usr/local/include/libxml2
>> checking LIBXML_LIBS... -L/usr/local/lib -lxml2 -lpthread -lz -lm
>> checking for glib-2.0 >= 0.0.1... yes
>> checking LIBGLIB_CFLAGS... -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include
>> checking LIBGLIB_LIBS... -L/usr/local/lib -lglib-2.0
>> checking for gmodule-2.0 >= 0.0.1... yes
>> checking LIBGMODULE_CFLAGS... -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include
>> checking LIBGMODULE_LIBS... -Wl,--export-dynamic -L/usr/local/lib
>> -lgmodule-2.0 -ldl -lglib-2.0
>> checking for mysql_config... /usr/bin/mysql_config
>> checking for pg_config... /usr/bin/pg_config
>> checking for ODBC files... configure: WARNING: ODBC input method is not
>> going to be used
>> checking for php-config... no
>> *** WARNING: PHP NOT FOUND IN PATH. RLIB WILL NOT BE COMPILED WITH
>> SUPPORT FOR IT
>> TEST 1
>> checking for a Python interpreter with version >= 2.4... python
>> checking for python... /usr/local/bin/python
>> checking for python version... 2.4
>> checking for python platform... linux2
>> TEST 2
>> -I ${prefix}/include/python2.4
>> checking for PERL files... configure: WARNING: PERL bindings are not
>> going
>> to be used
>> checking iconv.h usability... yes
>> checking iconv.h presence... yes
>> checking for iconv.h... yes
>> checking for iconv_open... yes
>> checking for iconv_open in -liconv... no
>> checking for libiconv_open in -liconv... no
>> checking where to find iconv_open... libc
>> checking whether iconv takes const char ** or char **... char **
>> checking whether iconv takes ISO8859-1 or ISO-8859-1... ISO8859-1
>> checking cpdflib.h usability... yes
>> checking cpdflib.h presence... yes
>> checking for cpdflib.h... yes
>> checking for cpdf_init in -lcpdf... yes
>> checking for ANSI C header files... (cached) yes
>> checking fcntl.h usability... yes
>> checking fcntl.h presence... yes
>> checking for fcntl.h... yes
>> checking for unistd.h... (cached) yes
>> checking for an ANSI C-conforming const... yes
>> configure: creating ./config.status
>> config.status: creating Makefile
>> config.status: creating rlib.pc
>> config.status: creating libsrc/Makefile
>> config.status: creating src/Makefile
>> config.status: creating src/examples/Makefile
>> config.status: creating src/examples/common/Makefile
>> config.status: creating src/examples/c/Makefile
>> config.status: creating src/examples/php/Makefile
>> config.status: creating src/examples/python/Makefile
>> config.status: creating src/examples/java/Makefile
>> config.status: creating bindings/Makefile
>> config.status: creating bindings/php/Makefile
>> config.status: creating bindings/python/Makefile
>> config.status: creating bindings/perl/Makefile
>> config.status: creating bindings/java/Makefile
>> config.status: creating bindings/interfaces/Makefile
>> config.status: creating inputs/Makefile
>> config.status: creating inputs/mysql/Makefile
>> config.status: creating inputs/odbc/Makefile
>> config.status: creating inputs/postgre/Makefile
>> config.status: creating tests/Makefile
>> config.status: creating config.h
>> config.status: executing depfiles commands
>>
>> rlib-1.3.0:
>>
>> prefix: /usr/local
>> compiler: gcc
>> Memory debugging: no
>> Warning Fun: no
>> Crash detection: yes
>> UTF8 disabled: no
>>
>> INPUTS:
>> MYSQL: yes
>> POSTGRE: yes
>> ODBC: no
>>
>> OUTPUTS:
>> PDF: yes
>> HTML: Always
>> CSV: Always
>> TEXT: Always
>>
>> BINDINGS:
>> PHP: no
>> PHP entension dir:
>> PYTHON: yes
>> PYTHON version: 2.4
>> PYTHON entension dir:
>> ${exec_prefix}/lib/python2.4/site-packages
>> JAVA: no
>> PERL: no
>> PERL entension dir:
>>
>> Music: Velvet Revolver
>>
>> Having Problems: rlib-users-TtF/[email protected]
>> Want to contribute: rlib-devel-TtF/[email protected]
>> [foo rlib-1.3.0]$
>>
>> Output of make:
>> [foo rlib-1.3.0]$ make
>> make all-recursive
>> make[1]: Entering directory `/usr/ftp/rlib-1.3.0'
>> Making all in libsrc
>> make[2]: Entering directory `/usr/ftp/rlib-1.3.0/libsrc'
>> source='parsexml.c' object='parsexml.lo' libtool=yes \
>> depfile='.deps/parsexml.Plo' tmpdepfile='.deps/parsexml.TPlo' \
>> depmode=gcc3 /bin/sh ../depcomp \
>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>> /usr/include
>> -I /usr/local/include/python2.4 -g -O2 -c -o parsexml.lo `test
>> -f
>> 'parsexml.c' || echo './'`parsexml.c
>> mkdir .libs
>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>> -O2 -c parsexml.c -MT parsexml.lo -MD -MP -MF .deps/parsexml.TPlo -fPIC
>> -DPIC -o .libs/parsexml.o
>> source='reportgen.c' object='reportgen.lo' libtool=yes \
>> depfile='.deps/reportgen.Plo' tmpdepfile='.deps/reportgen.TPlo' \
>> depmode=gcc3 /bin/sh ../depcomp \
>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>> /usr/include
>> -I /usr/local/include/python2.4 -g -O2 -c -o reportgen.lo `test
>> -f
>> 'reportgen.c' || echo './'`reportgen.c
>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>> -O2 -c reportgen.c -MT reportgen.lo -MD -MP -MF .deps/reportgen.TPlo
>> -fPIC -DPIC -o .libs/reportgen.o
>> source='layout.c' object='layout.lo' libtool=yes \
>> depfile='.deps/layout.Plo' tmpdepfile='.deps/layout.TPlo' \
>> depmode=gcc3 /bin/sh ../depcomp \
>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>> /usr/include
>> -I /usr/local/include/python2.4 -g -O2 -c -o layout.lo `test -f
>> 'layout.c' || echo './'`layout.c
>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>> -O2 -c layout.c -MT layout.lo -MD -MP -MF .deps/layout.TPlo -fPIC -DPIC
>> -o .libs/layout.o
>> source='api.c' object='api.lo' libtool=yes \
>> depfile='.deps/api.Plo' tmpdepfile='.deps/api.TPlo' \
>> depmode=gcc3 /bin/sh ../depcomp \
>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>> /usr/include
>> -I /usr/local/include/python2.4 -g -O2 -c -o api.lo `test -f
>> 'api.c' || echo './'`api.c
>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>> -O2 -c api.c -MT api.lo -MD -MP -MF .deps/api.TPlo -fPIC -DPIC -o
>> .libs/api.o
>> source='resolution.c' object='resolution.lo' libtool=yes \
>> depfile='.deps/resolution.Plo' tmpdepfile='.deps/resolution.TPlo' \
>> depmode=gcc3 /bin/sh ../depcomp \
>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>> /usr/include
>> -I /usr/local/include/python2.4 -g -O2 -c -o resolution.lo `test
>> -f 'resolution.c' || echo './'`resolution.c
>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>> -O2 -c resolution.c -MT resolution.lo -MD -MP -MF .deps/resolution.TPlo
>> -fPIC -DPIC -o .libs/resolution.o
>> source='util.c' object='util.lo' libtool=yes \
>> depfile='.deps/util.Plo' tmpdepfile='.deps/util.TPlo' \
>> depmode=gcc3 /bin/sh ../depcomp \
>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>> /usr/include
>> -I /usr/local/include/python2.4 -g -O2 -c -o util.lo `test -f
>> 'util.c' || echo './'`util.c
>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>> -O2 -c util.c -MT util.lo -MD -MP -MF .deps/util.TPlo -fPIC -DPIC -o
>> .libs/util.o
>> util.c:37: error: conflicting types for 'llabs'
>> util.c:37: error: conflicting types for 'llabs'
>> make[2]: *** [util.lo] Error 1
>> make[2]: Leaving directory `/usr/ftp/rlib-1.3.0/libsrc'
>> make[1]: *** [all-recursive] Error 1
>> make[1]: Leaving directory `/usr/ftp/rlib-1.3.0'
>> make: *** [all] Error 2
>> [foo rlib-1.3.0]$
>>
>>
>> Thank you in advance!
>> Billy-
>>
>>
>> -------------------------------------------------------
>> SF email is sponsored by - The IT Product Guide
>> Read honest & candid reviews on hundreds of IT Products from real users.
>> Discover which products truly live up to the hype. Start reading now.
>> http://productguide.itmanagersjournal.com/
>> _______________________________________________
>> Rlib-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/rlib-users
>>
>
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/