Re: Unable to compile rlib 1.3.0 Opteron 64 bit CPU
"Bob Doan" <bdoan-J0aWFLYJOWhWk0Htik3J/[email protected]>
| Newsgroups | gmane.text.rlib.user |
|---|---|
| Message-ID | <[email protected]> |
Seems like you are the 1st 64bit user of rlib
in pcode.h line 172 make the "long long" a "gint64"
-- bob
> Hi,
>
> Thank you for the suggestion. I just tried it. It created a new set of
> erorrs during make. Before running make again, I did a make clean, make
> distclean, and ran ./configure --with-pythonver=2.4 again.
>
> [foo rlib-1.3.0]$ make
> make all-recursive
> make[1]: Entering directory `/usr/ftp/rlib-1.3.0'
> Making all in libsrc
> make[2]: Entering directory `/usr/ftp/rlib-1.3.0/libsrc'
> source='parsexml.c' object='parsexml.lo' libtool=yes \
> depfile='.deps/parsexml.Plo' tmpdepfile='.deps/parsexml.TPlo' \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I /usr/include
> -I /usr/local/include/python2.4 -g -O2 -c -o parsexml.lo `test -f
> 'parsexml.c' || echo './'`parsexml.c
> mkdir .libs
> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
> -O2 -c parsexml.c -MT parsexml.lo -MD -MP -MF .deps/parsexml.TPlo -fPIC
> -DPIC -o .libs/parsexml.o
> source='reportgen.c' object='reportgen.lo' libtool=yes \
> depfile='.deps/reportgen.Plo' tmpdepfile='.deps/reportgen.TPlo' \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I /usr/include
> -I /usr/local/include/python2.4 -g -O2 -c -o reportgen.lo `test -f
> 'reportgen.c' || echo './'`reportgen.c
> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
> -O2 -c reportgen.c -MT reportgen.lo -MD -MP -MF .deps/reportgen.TPlo
> -fPIC -DPIC -o .libs/reportgen.o
> source='layout.c' object='layout.lo' libtool=yes \
> depfile='.deps/layout.Plo' tmpdepfile='.deps/layout.TPlo' \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I /usr/include
> -I /usr/local/include/python2.4 -g -O2 -c -o layout.lo `test -f
> 'layout.c' || echo './'`layout.c
> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
> -O2 -c layout.c -MT layout.lo -MD -MP -MF .deps/layout.TPlo -fPIC -DPIC
> -o .libs/layout.o
> source='api.c' object='api.lo' libtool=yes \
> depfile='.deps/api.Plo' tmpdepfile='.deps/api.TPlo' \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I /usr/include
> -I /usr/local/include/python2.4 -g -O2 -c -o api.lo `test -f
> 'api.c' || echo './'`api.c
> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
> -O2 -c api.c -MT api.lo -MD -MP -MF .deps/api.TPlo -fPIC -DPIC -o
> .libs/api.o
> source='resolution.c' object='resolution.lo' libtool=yes \
> depfile='.deps/resolution.Plo' tmpdepfile='.deps/resolution.TPlo' \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I /usr/include
> -I /usr/local/include/python2.4 -g -O2 -c -o resolution.lo `test
> -f 'resolution.c' || echo './'`resolution.c
> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
> -O2 -c resolution.c -MT resolution.lo -MD -MP -MF .deps/resolution.TPlo
> -fPIC -DPIC -o .libs/resolution.o
> source='util.c' object='util.lo' libtool=yes \
> depfile='.deps/util.Plo' tmpdepfile='.deps/util.TPlo' \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I /usr/include
> -I /usr/local/include/python2.4 -g -O2 -c -o util.lo `test -f
> 'util.c' || echo './'`util.c
> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
> -O2 -c util.c -MT util.lo -MD -MP -MF .deps/util.TPlo -fPIC -DPIC -o
> .libs/util.o
> source='pcode.c' object='pcode.lo' libtool=yes \
> depfile='.deps/pcode.Plo' tmpdepfile='.deps/pcode.TPlo' \
> depmode=gcc3 /bin/sh ../depcomp \
> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I /usr/include
> -I /usr/local/include/python2.4 -g -O2 -c -o pcode.lo `test -f
> 'pcode.c' || echo './'`pcode.c
> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
> -O2 -c pcode.c -MT pcode.lo -MD -MP -MF .deps/pcode.TPlo -fPIC -DPIC -o
> .libs/pcode.o
> pcode.c: In function `rlib_new_operand':
> pcode.c:279: warning: cast to pointer from integer of different size
> pcode.c: At top level:
> pcode.c:655: error: conflicting types for 'rlib_value_new_number'
> pcode.h:172: error: previous declaration of 'rlib_value_new_number' was
> here
> pcode.c:655: error: conflicting types for 'rlib_value_new_number'
> pcode.h:172: error: previous declaration of 'rlib_value_new_number' was
> here
> make[2]: *** [pcode.lo] Error 1
> make[2]: Leaving directory `/usr/ftp/rlib-1.3.0/libsrc'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/usr/ftp/rlib-1.3.0'
> make: *** [all] Error 2
> [foo rlib-1.3.0]$
>
>> Hi,
>>
>> Just comment out or remove line 37 in util.c
>>
>> I also noticed you don't have php-devel installed. You might want to
>> install that if you want php support to work
>>
>> - bob
>>
>>> Hello,
>>>
>>> I am trying to compile rlib 1.3.0 on a server with dual AMD Opteron
>>> (tm)
>>> Processor 848 (64 bit) CPU's running Red Hat Enterprise Linux AS
>>> (version
>>> 3 update 2).
>>>
>>> Info about server:
>>> [foo rlib-1.3.0]$ uname -a
>>> Linux host.somewhere.com 2.4.21-15.ELsmp #1 SMP Thu Apr 22 00:09:01 EDT
>>> 2004 x86_64 x86_64 x86_64 GNU/Linux
>>> [foo rlib-1.3.0]$
>>>
>>> I am using GNU Make 3.8.0, gcc version 3.4.3. The configure script
>>> works
>>> fine (see output below), but make gives an error about conflicting
>>> types
>>> for llabs. I have tried enabling and disabling various options availble
>>> to
>>> configure (disabling everything) and still get the error.
>>>
>>> Any help to get this compiled would be greatly appreciated.
>>>
>>>
>>>
>>> Output of configure:
>>> [foo rlib-1.3.0]$ ./configure --with-pythonver=2.4
>>> checking for a BSD-compatible install... /usr/bin/install -c
>>> checking whether build environment is sane... yes
>>> checking for gawk... gawk
>>> checking whether make sets $(MAKE)... yes
>>> checking whether to enable maintainer-specific portions of Makefiles...
>>> no
>>> checking for gcc... gcc
>>> checking for C compiler default output file name... a.out
>>> checking whether the C compiler works... yes
>>> checking whether we are cross compiling... no
>>> checking for suffix of executables...
>>> checking for suffix of object files... o
>>> checking whether we are using the GNU C compiler... yes
>>> checking whether gcc accepts -g... yes
>>> checking for gcc option to accept ANSI C... none needed
>>> checking for style of include used by make... GNU
>>> checking dependency style of gcc... gcc3
>>> checking whether make sets $(MAKE)... (cached) yes
>>> checking for a BSD-compatible install... /usr/bin/install -c
>>> checking build system type... x86_64-redhat-linux-gnu
>>> checking host system type... x86_64-redhat-linux-gnu
>>> checking for a sed that does not truncate output... /bin/sed
>>> checking for egrep... grep -E
>>> checking for ld used by gcc... /usr/bin/ld
>>> checking if the linker (/usr/bin/ld) is GNU ld... yes
>>> checking for /usr/bin/ld option to reload object files... -r
>>> checking for BSD-compatible nm... /usr/bin/nm -B
>>> checking whether ln -s works... yes
>>> checking how to recognise dependent libraries... pass_all
>>> checking how to run the C preprocessor... gcc -E
>>> checking for ANSI C header files... yes
>>> checking for sys/types.h... yes
>>> checking for sys/stat.h... yes
>>> checking for stdlib.h... yes
>>> checking for string.h... yes
>>> checking for memory.h... yes
>>> checking for strings.h... yes
>>> checking for inttypes.h... yes
>>> checking for stdint.h... yes
>>> checking for unistd.h... yes
>>> checking dlfcn.h usability... yes
>>> checking dlfcn.h presence... yes
>>> checking for dlfcn.h... yes
>>> checking for g++... g++
>>> checking whether we are using the GNU C++ compiler... yes
>>> checking whether g++ accepts -g... yes
>>> checking dependency style of g++... gcc3
>>> checking how to run the C++ preprocessor... g++ -E
>>> checking for g77... g77
>>> checking whether we are using the GNU Fortran 77 compiler... yes
>>> checking whether g77 accepts -g... yes
>>> checking the maximum length of command line arguments... 32768
>>> checking command to parse /usr/bin/nm -B output from gcc object... ok
>>> checking for objdir... .libs
>>> checking for ar... ar
>>> checking for ranlib... ranlib
>>> checking for strip... strip
>>> checking if gcc static flag works... yes
>>> checking if gcc supports -fno-rtti -fno-exceptions... no
>>> checking for gcc option to produce PIC... -fPIC
>>> checking if gcc PIC flag -fPIC works... yes
>>> checking if gcc supports -c -o file.o... yes
>>> checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports
>>> shared libraries... yes
>>> checking whether -lc should be explicitly linked in... no
>>> checking dynamic linker characteristics... GNU/Linux ld.so
>>> checking how to hardcode library paths into programs... immediate
>>> checking whether stripping libraries is possible... yes
>>> checking for shl_load... no
>>> checking for shl_load in -ldld... no
>>> checking for dlopen... no
>>> checking for dlopen in -ldl... yes
>>> checking whether a program can dlopen itself... yes
>>> checking whether a statically linked program can dlopen itself... yes
>>> checking if libtool supports shared libraries... yes
>>> checking whether to build shared libraries... yes
>>> checking whether to build static libraries... no
>>> configure: creating libtool
>>> appending configuration tag "CXX" to libtool
>>> checking for ld used by g++... /usr/bin/ld -m elf_x86_64
>>> checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
>>> checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports
>>> shared libraries... yes
>>> checking for g++ option to produce PIC... -fPIC
>>> checking if g++ PIC flag -fPIC works... yes
>>> checking if g++ supports -c -o file.o... yes
>>> checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports
>>> shared libraries... yes
>>> checking dynamic linker characteristics... GNU/Linux ld.so
>>> checking how to hardcode library paths into programs... immediate
>>> checking whether stripping libraries is possible... yes
>>> checking for shl_load... (cached) no
>>> checking for shl_load in -ldld... (cached) no
>>> checking for dlopen... (cached) no
>>> checking for dlopen in -ldl... (cached) yes
>>> checking whether a program can dlopen itself... (cached) yes
>>> checking whether a statically linked program can dlopen itself...
>>> (cached)
>>> yes
>>> appending configuration tag "F77" to libtool
>>> checking if libtool supports shared libraries... yes
>>> checking whether to build shared libraries... yes
>>> checking whether to build static libraries... no
>>> checking for g77 option to produce PIC... -fPIC
>>> checking if g77 PIC flag -fPIC works... yes
>>> checking if g77 supports -c -o file.o... yes
>>> checking whether the g77 linker (/usr/bin/ld -m elf_x86_64) supports
>>> shared libraries... yes
>>> checking dynamic linker characteristics... GNU/Linux ld.so
>>> checking how to hardcode library paths into programs... immediate
>>> checking whether stripping libraries is possible... yes
>>> checking for exit in -lc... yes
>>> checking for exp in -lm... yes
>>> checking for pkg-config... /usr/local/bin/pkg-config
>>> checking for libxml-2.0 >= 2.6.0... yes
>>> checking LIBXML_CFLAGS... -I/usr/local/include/libxml2
>>> checking LIBXML_LIBS... -L/usr/local/lib -lxml2 -lpthread -lz -lm
>>> checking for glib-2.0 >= 0.0.1... yes
>>> checking LIBGLIB_CFLAGS... -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include
>>> checking LIBGLIB_LIBS... -L/usr/local/lib -lglib-2.0
>>> checking for gmodule-2.0 >= 0.0.1... yes
>>> checking LIBGMODULE_CFLAGS... -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include
>>> checking LIBGMODULE_LIBS... -Wl,--export-dynamic -L/usr/local/lib
>>> -lgmodule-2.0 -ldl -lglib-2.0
>>> checking for mysql_config... /usr/bin/mysql_config
>>> checking for pg_config... /usr/bin/pg_config
>>> checking for ODBC files... configure: WARNING: ODBC input method is not
>>> going to be used
>>> checking for php-config... no
>>> *** WARNING: PHP NOT FOUND IN PATH. RLIB WILL NOT BE COMPILED WITH
>>> SUPPORT FOR IT
>>> TEST 1
>>> checking for a Python interpreter with version >= 2.4... python
>>> checking for python... /usr/local/bin/python
>>> checking for python version... 2.4
>>> checking for python platform... linux2
>>> TEST 2
>>> -I ${prefix}/include/python2.4
>>> checking for PERL files... configure: WARNING: PERL bindings are not
>>> going
>>> to be used
>>> checking iconv.h usability... yes
>>> checking iconv.h presence... yes
>>> checking for iconv.h... yes
>>> checking for iconv_open... yes
>>> checking for iconv_open in -liconv... no
>>> checking for libiconv_open in -liconv... no
>>> checking where to find iconv_open... libc
>>> checking whether iconv takes const char ** or char **... char **
>>> checking whether iconv takes ISO8859-1 or ISO-8859-1... ISO8859-1
>>> checking cpdflib.h usability... yes
>>> checking cpdflib.h presence... yes
>>> checking for cpdflib.h... yes
>>> checking for cpdf_init in -lcpdf... yes
>>> checking for ANSI C header files... (cached) yes
>>> checking fcntl.h usability... yes
>>> checking fcntl.h presence... yes
>>> checking for fcntl.h... yes
>>> checking for unistd.h... (cached) yes
>>> checking for an ANSI C-conforming const... yes
>>> configure: creating ./config.status
>>> config.status: creating Makefile
>>> config.status: creating rlib.pc
>>> config.status: creating libsrc/Makefile
>>> config.status: creating src/Makefile
>>> config.status: creating src/examples/Makefile
>>> config.status: creating src/examples/common/Makefile
>>> config.status: creating src/examples/c/Makefile
>>> config.status: creating src/examples/php/Makefile
>>> config.status: creating src/examples/python/Makefile
>>> config.status: creating src/examples/java/Makefile
>>> config.status: creating bindings/Makefile
>>> config.status: creating bindings/php/Makefile
>>> config.status: creating bindings/python/Makefile
>>> config.status: creating bindings/perl/Makefile
>>> config.status: creating bindings/java/Makefile
>>> config.status: creating bindings/interfaces/Makefile
>>> config.status: creating inputs/Makefile
>>> config.status: creating inputs/mysql/Makefile
>>> config.status: creating inputs/odbc/Makefile
>>> config.status: creating inputs/postgre/Makefile
>>> config.status: creating tests/Makefile
>>> config.status: creating config.h
>>> config.status: executing depfiles commands
>>>
>>> rlib-1.3.0:
>>>
>>> prefix: /usr/local
>>> compiler: gcc
>>> Memory debugging: no
>>> Warning Fun: no
>>> Crash detection: yes
>>> UTF8 disabled: no
>>>
>>> INPUTS:
>>> MYSQL: yes
>>> POSTGRE: yes
>>> ODBC: no
>>>
>>> OUTPUTS:
>>> PDF: yes
>>> HTML: Always
>>> CSV: Always
>>> TEXT: Always
>>>
>>> BINDINGS:
>>> PHP: no
>>> PHP entension dir:
>>> PYTHON: yes
>>> PYTHON version: 2.4
>>> PYTHON entension dir:
>>> ${exec_prefix}/lib/python2.4/site-packages
>>> JAVA: no
>>> PERL: no
>>> PERL entension dir:
>>>
>>> Music: Velvet Revolver
>>>
>>> Having Problems: rlib-users-TtF/[email protected]
>>> Want to contribute: rlib-devel-TtF/[email protected]
>>> [foo rlib-1.3.0]$
>>>
>>> Output of make:
>>> [foo rlib-1.3.0]$ make
>>> make all-recursive
>>> make[1]: Entering directory `/usr/ftp/rlib-1.3.0'
>>> Making all in libsrc
>>> make[2]: Entering directory `/usr/ftp/rlib-1.3.0/libsrc'
>>> source='parsexml.c' object='parsexml.lo' libtool=yes \
>>> depfile='.deps/parsexml.Plo' tmpdepfile='.deps/parsexml.TPlo' \
>>> depmode=gcc3 /bin/sh ../depcomp \
>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>> /usr/include
>>> -I /usr/local/include/python2.4 -g -O2 -c -o parsexml.lo `test
>>> -f
>>> 'parsexml.c' || echo './'`parsexml.c
>>> mkdir .libs
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>>> -O2 -c parsexml.c -MT parsexml.lo -MD -MP -MF .deps/parsexml.TPlo
>>> -fPIC
>>> -DPIC -o .libs/parsexml.o
>>> source='reportgen.c' object='reportgen.lo' libtool=yes \
>>> depfile='.deps/reportgen.Plo' tmpdepfile='.deps/reportgen.TPlo' \
>>> depmode=gcc3 /bin/sh ../depcomp \
>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>> /usr/include
>>> -I /usr/local/include/python2.4 -g -O2 -c -o reportgen.lo `test
>>> -f
>>> 'reportgen.c' || echo './'`reportgen.c
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>>> -O2 -c reportgen.c -MT reportgen.lo -MD -MP -MF .deps/reportgen.TPlo
>>> -fPIC -DPIC -o .libs/reportgen.o
>>> source='layout.c' object='layout.lo' libtool=yes \
>>> depfile='.deps/layout.Plo' tmpdepfile='.deps/layout.TPlo' \
>>> depmode=gcc3 /bin/sh ../depcomp \
>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>> /usr/include
>>> -I /usr/local/include/python2.4 -g -O2 -c -o layout.lo `test -f
>>> 'layout.c' || echo './'`layout.c
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>>> -O2 -c layout.c -MT layout.lo -MD -MP -MF .deps/layout.TPlo -fPIC
>>> -DPIC
>>> -o .libs/layout.o
>>> source='api.c' object='api.lo' libtool=yes \
>>> depfile='.deps/api.Plo' tmpdepfile='.deps/api.TPlo' \
>>> depmode=gcc3 /bin/sh ../depcomp \
>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>> /usr/include
>>> -I /usr/local/include/python2.4 -g -O2 -c -o api.lo `test -f
>>> 'api.c' || echo './'`api.c
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>>> -O2 -c api.c -MT api.lo -MD -MP -MF .deps/api.TPlo -fPIC -DPIC -o
>>> .libs/api.o
>>> source='resolution.c' object='resolution.lo' libtool=yes \
>>> depfile='.deps/resolution.Plo' tmpdepfile='.deps/resolution.TPlo' \
>>> depmode=gcc3 /bin/sh ../depcomp \
>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>> /usr/include
>>> -I /usr/local/include/python2.4 -g -O2 -c -o resolution.lo
>>> `test
>>> -f 'resolution.c' || echo './'`resolution.c
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>>> -O2 -c resolution.c -MT resolution.lo -MD -MP -MF .deps/resolution.TPlo
>>> -fPIC -DPIC -o .libs/resolution.o
>>> source='util.c' object='util.lo' libtool=yes \
>>> depfile='.deps/util.Plo' tmpdepfile='.deps/util.TPlo' \
>>> depmode=gcc3 /bin/sh ../depcomp \
>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>> /usr/include
>>> -I /usr/local/include/python2.4 -g -O2 -c -o util.lo `test -f
>>> 'util.c' || echo './'`util.c
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>>> -O2 -c util.c -MT util.lo -MD -MP -MF .deps/util.TPlo -fPIC -DPIC -o
>>> .libs/util.o
>>> util.c:37: error: conflicting types for 'llabs'
>>> util.c:37: error: conflicting types for 'llabs'
>>> make[2]: *** [util.lo] Error 1
>>> make[2]: Leaving directory `/usr/ftp/rlib-1.3.0/libsrc'
>>> make[1]: *** [all-recursive] Error 1
>>> make[1]: Leaving directory `/usr/ftp/rlib-1.3.0'
>>> make: *** [all] Error 2
>>> [foo rlib-1.3.0]$
>>>
>>>
>>> Thank you in advance!
>>> Billy-
>>>
>>>
>>> -------------------------------------------------------
>>> SF email is sponsored by - The IT Product Guide
>>> Read honest & candid reviews on hundreds of IT Products from real
>>> users.
>>> Discover which products truly live up to the hype. Start reading now.
>>> http://productguide.itmanagersjournal.com/
>>> _______________________________________________
>>> Rlib-users mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/rlib-users
>>>
>>
>>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Rlib-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/rlib-users
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/