Re: Unable to compile rlib 1.3.0 Opteron 64 bit CPU
"Billy Shaw" <[email protected]>
| Newsgroups | gmane.text.rlib.user |
|---|---|
| Message-ID | <18784.167.206.132.252.1104272244.squirrel@webmail.sceneunseen.com> |
Bob,
I feel one step closer... but not quite there yet. I have made the
recommended change to pcode.h, did the make clean, make distclean, and
./configure --with-pythonver=2.4. Compilation went past the pcode.h error,
and now I have a new one from ld for libcpdf.a asking to recompile with
-fPIC. As a result, I tried make clean, make distclean, and ./configure
--with-pythonver=2.4 --with-pic, but got the same erorr as without.
Thoughts?
NOTE: Only last few lines of make output have been included below.
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
-O2 -c value.c -MT value.lo -MD -MP -MF .deps/value.TPlo -fPIC -DPIC -o
.libs/value.o
/bin/sh ../libtool --mode=link gcc -g -O2 -o libr.la -rpath
/usr/local/lib -release 1.3.0 parsexml.lo reportgen.lo layout.lo api.lo
resolution.lo util.lo pcode.lo pcode_op_functions.lo formatstring.lo
fxp.lo breaks.lo pdf.lo html.lo txt.lo datasource.lo csv.lo ralloc.lo
environment.lo free.lo navigation.lo save.lo load.lo containers.lo
charencoder.lo datetime.lo value.lo -L/usr/local/lib -lxml2 -lpthread -lz
-lm -L/usr/local/lib -lglib-2.0 -Wl,--export-dynamic -L/usr/local/lib
-lgmodule-2.0 -ldl -lglib-2.0 -L/usr/lib64/mysql -lmysqlclient -lz
-lcrypt -lnsl -lm -L/usr/lib64 -lpq -lcpdf -ldl -lcpdf -lm -lc
gcc -shared .libs/parsexml.o .libs/reportgen.o .libs/layout.o .libs/api.o
.libs/resolution.o .libs/util.o .libs/pcode.o .libs/pcode_op_functions.o
.libs/formatstring.o .libs/fxp.o .libs/breaks.o .libs/pdf.o .libs/html.o
.libs/txt.o .libs/datasource.o .libs/csv.o .libs/ralloc.o
.libs/environment.o .libs/free.o .libs/navigation.o .libs/save.o
.libs/load.o .libs/containers.o .libs/charencoder.o .libs/datetime.o
.libs/value.o -Wl,--rpath -Wl,/usr/local/lib -Wl,--rpath
-Wl,/usr/local/lib -L/usr/local/lib /usr/local/lib/libxml2.so -lpthread
/usr/local/lib/libgmodule-2.0.so /usr/local/lib/libglib-2.0.so
-L/usr/lib64/mysql -lmysqlclient -lz -lcrypt -lnsl -L/usr/lib64 -lpq -ldl
-lcpdf -lm -lc -Wl,--export-dynamic -Wl,-soname -Wl,libr-1.3.0.so -o
.libs/libr-1.3.0.so
/usr/bin/ld: /usr/local/lib/libcpdf.a(cpdfInit.o): relocation R_X86_64_32
can not be used when making a shared object; recompile with -fPIC
/usr/local/lib/libcpdf.a: could not read symbols: Bad value
collect2: ld returned 1 exit status
make[2]: *** [libr.la] Error 1
make[2]: Leaving directory `/usr/ftp/rlib-1.3.0/libsrc'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/ftp/rlib-1.3.0'
make: *** [all] Error 2
> Seems like you are the 1st 64bit user of rlib
>
> in pcode.h line 172 make the "long long" a "gint64"
>
> -- bob
>
>> Hi,
>>
>> Thank you for the suggestion. I just tried it. It created a new set of
>> erorrs during make. Before running make again, I did a make clean, make
>> distclean, and ran ./configure --with-pythonver=2.4 again.
>>
>> [foo rlib-1.3.0]$ make
>> make all-recursive
>> make[1]: Entering directory `/usr/ftp/rlib-1.3.0'
>> Making all in libsrc
>> make[2]: Entering directory `/usr/ftp/rlib-1.3.0/libsrc'
>> source='parsexml.c' object='parsexml.lo' libtool=yes \
>> depfile='.deps/parsexml.Plo' tmpdepfile='.deps/parsexml.TPlo' \
>> depmode=gcc3 /bin/sh ../depcomp \
>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>> /usr/include
>> -I /usr/local/include/python2.4 -g -O2 -c -o parsexml.lo `test
>> -f
>> 'parsexml.c' || echo './'`parsexml.c
>> mkdir .libs
>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>> -O2 -c parsexml.c -MT parsexml.lo -MD -MP -MF .deps/parsexml.TPlo -fPIC
>> -DPIC -o .libs/parsexml.o
>> source='reportgen.c' object='reportgen.lo' libtool=yes \
>> depfile='.deps/reportgen.Plo' tmpdepfile='.deps/reportgen.TPlo' \
>> depmode=gcc3 /bin/sh ../depcomp \
>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>> /usr/include
>> -I /usr/local/include/python2.4 -g -O2 -c -o reportgen.lo `test
>> -f
>> 'reportgen.c' || echo './'`reportgen.c
>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>> -O2 -c reportgen.c -MT reportgen.lo -MD -MP -MF .deps/reportgen.TPlo
>> -fPIC -DPIC -o .libs/reportgen.o
>> source='layout.c' object='layout.lo' libtool=yes \
>> depfile='.deps/layout.Plo' tmpdepfile='.deps/layout.TPlo' \
>> depmode=gcc3 /bin/sh ../depcomp \
>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>> /usr/include
>> -I /usr/local/include/python2.4 -g -O2 -c -o layout.lo `test -f
>> 'layout.c' || echo './'`layout.c
>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>> -O2 -c layout.c -MT layout.lo -MD -MP -MF .deps/layout.TPlo -fPIC -DPIC
>> -o .libs/layout.o
>> source='api.c' object='api.lo' libtool=yes \
>> depfile='.deps/api.Plo' tmpdepfile='.deps/api.TPlo' \
>> depmode=gcc3 /bin/sh ../depcomp \
>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>> /usr/include
>> -I /usr/local/include/python2.4 -g -O2 -c -o api.lo `test -f
>> 'api.c' || echo './'`api.c
>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>> -O2 -c api.c -MT api.lo -MD -MP -MF .deps/api.TPlo -fPIC -DPIC -o
>> .libs/api.o
>> source='resolution.c' object='resolution.lo' libtool=yes \
>> depfile='.deps/resolution.Plo' tmpdepfile='.deps/resolution.TPlo' \
>> depmode=gcc3 /bin/sh ../depcomp \
>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>> /usr/include
>> -I /usr/local/include/python2.4 -g -O2 -c -o resolution.lo `test
>> -f 'resolution.c' || echo './'`resolution.c
>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>> -O2 -c resolution.c -MT resolution.lo -MD -MP -MF .deps/resolution.TPlo
>> -fPIC -DPIC -o .libs/resolution.o
>> source='util.c' object='util.lo' libtool=yes \
>> depfile='.deps/util.Plo' tmpdepfile='.deps/util.TPlo' \
>> depmode=gcc3 /bin/sh ../depcomp \
>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>> /usr/include
>> -I /usr/local/include/python2.4 -g -O2 -c -o util.lo `test -f
>> 'util.c' || echo './'`util.c
>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>> -O2 -c util.c -MT util.lo -MD -MP -MF .deps/util.TPlo -fPIC -DPIC -o
>> .libs/util.o
>> source='pcode.c' object='pcode.lo' libtool=yes \
>> depfile='.deps/pcode.Plo' tmpdepfile='.deps/pcode.TPlo' \
>> depmode=gcc3 /bin/sh ../depcomp \
>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>> /usr/include
>> -I /usr/local/include/python2.4 -g -O2 -c -o pcode.lo `test -f
>> 'pcode.c' || echo './'`pcode.c
>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>> -O2 -c pcode.c -MT pcode.lo -MD -MP -MF .deps/pcode.TPlo -fPIC -DPIC -o
>> .libs/pcode.o
>> pcode.c: In function `rlib_new_operand':
>> pcode.c:279: warning: cast to pointer from integer of different size
>> pcode.c: At top level:
>> pcode.c:655: error: conflicting types for 'rlib_value_new_number'
>> pcode.h:172: error: previous declaration of 'rlib_value_new_number' was
>> here
>> pcode.c:655: error: conflicting types for 'rlib_value_new_number'
>> pcode.h:172: error: previous declaration of 'rlib_value_new_number' was
>> here
>> make[2]: *** [pcode.lo] Error 1
>> make[2]: Leaving directory `/usr/ftp/rlib-1.3.0/libsrc'
>> make[1]: *** [all-recursive] Error 1
>> make[1]: Leaving directory `/usr/ftp/rlib-1.3.0'
>> make: *** [all] Error 2
>> [foo rlib-1.3.0]$
>>
>>> Hi,
>>>
>>> Just comment out or remove line 37 in util.c
>>>
>>> I also noticed you don't have php-devel installed. You might want to
>>> install that if you want php support to work
>>>
>>> - bob
>>>
>>>> Hello,
>>>>
>>>> I am trying to compile rlib 1.3.0 on a server with dual AMD Opteron
>>>> (tm)
>>>> Processor 848 (64 bit) CPU's running Red Hat Enterprise Linux AS
>>>> (version
>>>> 3 update 2).
>>>>
>>>> Info about server:
>>>> [foo rlib-1.3.0]$ uname -a
>>>> Linux host.somewhere.com 2.4.21-15.ELsmp #1 SMP Thu Apr 22 00:09:01
>>>> EDT
>>>> 2004 x86_64 x86_64 x86_64 GNU/Linux
>>>> [foo rlib-1.3.0]$
>>>>
>>>> I am using GNU Make 3.8.0, gcc version 3.4.3. The configure script
>>>> works
>>>> fine (see output below), but make gives an error about conflicting
>>>> types
>>>> for llabs. I have tried enabling and disabling various options
>>>> availble
>>>> to
>>>> configure (disabling everything) and still get the error.
>>>>
>>>> Any help to get this compiled would be greatly appreciated.
>>>>
>>>>
>>>>
>>>> Output of configure:
>>>> [foo rlib-1.3.0]$ ./configure --with-pythonver=2.4
>>>> checking for a BSD-compatible install... /usr/bin/install -c
>>>> checking whether build environment is sane... yes
>>>> checking for gawk... gawk
>>>> checking whether make sets $(MAKE)... yes
>>>> checking whether to enable maintainer-specific portions of
>>>> Makefiles...
>>>> no
>>>> checking for gcc... gcc
>>>> checking for C compiler default output file name... a.out
>>>> checking whether the C compiler works... yes
>>>> checking whether we are cross compiling... no
>>>> checking for suffix of executables...
>>>> checking for suffix of object files... o
>>>> checking whether we are using the GNU C compiler... yes
>>>> checking whether gcc accepts -g... yes
>>>> checking for gcc option to accept ANSI C... none needed
>>>> checking for style of include used by make... GNU
>>>> checking dependency style of gcc... gcc3
>>>> checking whether make sets $(MAKE)... (cached) yes
>>>> checking for a BSD-compatible install... /usr/bin/install -c
>>>> checking build system type... x86_64-redhat-linux-gnu
>>>> checking host system type... x86_64-redhat-linux-gnu
>>>> checking for a sed that does not truncate output... /bin/sed
>>>> checking for egrep... grep -E
>>>> checking for ld used by gcc... /usr/bin/ld
>>>> checking if the linker (/usr/bin/ld) is GNU ld... yes
>>>> checking for /usr/bin/ld option to reload object files... -r
>>>> checking for BSD-compatible nm... /usr/bin/nm -B
>>>> checking whether ln -s works... yes
>>>> checking how to recognise dependent libraries... pass_all
>>>> checking how to run the C preprocessor... gcc -E
>>>> checking for ANSI C header files... yes
>>>> checking for sys/types.h... yes
>>>> checking for sys/stat.h... yes
>>>> checking for stdlib.h... yes
>>>> checking for string.h... yes
>>>> checking for memory.h... yes
>>>> checking for strings.h... yes
>>>> checking for inttypes.h... yes
>>>> checking for stdint.h... yes
>>>> checking for unistd.h... yes
>>>> checking dlfcn.h usability... yes
>>>> checking dlfcn.h presence... yes
>>>> checking for dlfcn.h... yes
>>>> checking for g++... g++
>>>> checking whether we are using the GNU C++ compiler... yes
>>>> checking whether g++ accepts -g... yes
>>>> checking dependency style of g++... gcc3
>>>> checking how to run the C++ preprocessor... g++ -E
>>>> checking for g77... g77
>>>> checking whether we are using the GNU Fortran 77 compiler... yes
>>>> checking whether g77 accepts -g... yes
>>>> checking the maximum length of command line arguments... 32768
>>>> checking command to parse /usr/bin/nm -B output from gcc object... ok
>>>> checking for objdir... .libs
>>>> checking for ar... ar
>>>> checking for ranlib... ranlib
>>>> checking for strip... strip
>>>> checking if gcc static flag works... yes
>>>> checking if gcc supports -fno-rtti -fno-exceptions... no
>>>> checking for gcc option to produce PIC... -fPIC
>>>> checking if gcc PIC flag -fPIC works... yes
>>>> checking if gcc supports -c -o file.o... yes
>>>> checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports
>>>> shared libraries... yes
>>>> checking whether -lc should be explicitly linked in... no
>>>> checking dynamic linker characteristics... GNU/Linux ld.so
>>>> checking how to hardcode library paths into programs... immediate
>>>> checking whether stripping libraries is possible... yes
>>>> checking for shl_load... no
>>>> checking for shl_load in -ldld... no
>>>> checking for dlopen... no
>>>> checking for dlopen in -ldl... yes
>>>> checking whether a program can dlopen itself... yes
>>>> checking whether a statically linked program can dlopen itself... yes
>>>> checking if libtool supports shared libraries... yes
>>>> checking whether to build shared libraries... yes
>>>> checking whether to build static libraries... no
>>>> configure: creating libtool
>>>> appending configuration tag "CXX" to libtool
>>>> checking for ld used by g++... /usr/bin/ld -m elf_x86_64
>>>> checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
>>>> checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports
>>>> shared libraries... yes
>>>> checking for g++ option to produce PIC... -fPIC
>>>> checking if g++ PIC flag -fPIC works... yes
>>>> checking if g++ supports -c -o file.o... yes
>>>> checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports
>>>> shared libraries... yes
>>>> checking dynamic linker characteristics... GNU/Linux ld.so
>>>> checking how to hardcode library paths into programs... immediate
>>>> checking whether stripping libraries is possible... yes
>>>> checking for shl_load... (cached) no
>>>> checking for shl_load in -ldld... (cached) no
>>>> checking for dlopen... (cached) no
>>>> checking for dlopen in -ldl... (cached) yes
>>>> checking whether a program can dlopen itself... (cached) yes
>>>> checking whether a statically linked program can dlopen itself...
>>>> (cached)
>>>> yes
>>>> appending configuration tag "F77" to libtool
>>>> checking if libtool supports shared libraries... yes
>>>> checking whether to build shared libraries... yes
>>>> checking whether to build static libraries... no
>>>> checking for g77 option to produce PIC... -fPIC
>>>> checking if g77 PIC flag -fPIC works... yes
>>>> checking if g77 supports -c -o file.o... yes
>>>> checking whether the g77 linker (/usr/bin/ld -m elf_x86_64) supports
>>>> shared libraries... yes
>>>> checking dynamic linker characteristics... GNU/Linux ld.so
>>>> checking how to hardcode library paths into programs... immediate
>>>> checking whether stripping libraries is possible... yes
>>>> checking for exit in -lc... yes
>>>> checking for exp in -lm... yes
>>>> checking for pkg-config... /usr/local/bin/pkg-config
>>>> checking for libxml-2.0 >= 2.6.0... yes
>>>> checking LIBXML_CFLAGS... -I/usr/local/include/libxml2
>>>> checking LIBXML_LIBS... -L/usr/local/lib -lxml2 -lpthread -lz -lm
>>>> checking for glib-2.0 >= 0.0.1... yes
>>>> checking LIBGLIB_CFLAGS... -I/usr/local/include/glib-2.0
>>>> -I/usr/local/lib/glib-2.0/include
>>>> checking LIBGLIB_LIBS... -L/usr/local/lib -lglib-2.0
>>>> checking for gmodule-2.0 >= 0.0.1... yes
>>>> checking LIBGMODULE_CFLAGS... -I/usr/local/include/glib-2.0
>>>> -I/usr/local/lib/glib-2.0/include
>>>> checking LIBGMODULE_LIBS... -Wl,--export-dynamic -L/usr/local/lib
>>>> -lgmodule-2.0 -ldl -lglib-2.0
>>>> checking for mysql_config... /usr/bin/mysql_config
>>>> checking for pg_config... /usr/bin/pg_config
>>>> checking for ODBC files... configure: WARNING: ODBC input method is
>>>> not
>>>> going to be used
>>>> checking for php-config... no
>>>> *** WARNING: PHP NOT FOUND IN PATH. RLIB WILL NOT BE COMPILED WITH
>>>> SUPPORT FOR IT
>>>> TEST 1
>>>> checking for a Python interpreter with version >= 2.4... python
>>>> checking for python... /usr/local/bin/python
>>>> checking for python version... 2.4
>>>> checking for python platform... linux2
>>>> TEST 2
>>>> -I ${prefix}/include/python2.4
>>>> checking for PERL files... configure: WARNING: PERL bindings are not
>>>> going
>>>> to be used
>>>> checking iconv.h usability... yes
>>>> checking iconv.h presence... yes
>>>> checking for iconv.h... yes
>>>> checking for iconv_open... yes
>>>> checking for iconv_open in -liconv... no
>>>> checking for libiconv_open in -liconv... no
>>>> checking where to find iconv_open... libc
>>>> checking whether iconv takes const char ** or char **... char **
>>>> checking whether iconv takes ISO8859-1 or ISO-8859-1... ISO8859-1
>>>> checking cpdflib.h usability... yes
>>>> checking cpdflib.h presence... yes
>>>> checking for cpdflib.h... yes
>>>> checking for cpdf_init in -lcpdf... yes
>>>> checking for ANSI C header files... (cached) yes
>>>> checking fcntl.h usability... yes
>>>> checking fcntl.h presence... yes
>>>> checking for fcntl.h... yes
>>>> checking for unistd.h... (cached) yes
>>>> checking for an ANSI C-conforming const... yes
>>>> configure: creating ./config.status
>>>> config.status: creating Makefile
>>>> config.status: creating rlib.pc
>>>> config.status: creating libsrc/Makefile
>>>> config.status: creating src/Makefile
>>>> config.status: creating src/examples/Makefile
>>>> config.status: creating src/examples/common/Makefile
>>>> config.status: creating src/examples/c/Makefile
>>>> config.status: creating src/examples/php/Makefile
>>>> config.status: creating src/examples/python/Makefile
>>>> config.status: creating src/examples/java/Makefile
>>>> config.status: creating bindings/Makefile
>>>> config.status: creating bindings/php/Makefile
>>>> config.status: creating bindings/python/Makefile
>>>> config.status: creating bindings/perl/Makefile
>>>> config.status: creating bindings/java/Makefile
>>>> config.status: creating bindings/interfaces/Makefile
>>>> config.status: creating inputs/Makefile
>>>> config.status: creating inputs/mysql/Makefile
>>>> config.status: creating inputs/odbc/Makefile
>>>> config.status: creating inputs/postgre/Makefile
>>>> config.status: creating tests/Makefile
>>>> config.status: creating config.h
>>>> config.status: executing depfiles commands
>>>>
>>>> rlib-1.3.0:
>>>>
>>>> prefix: /usr/local
>>>> compiler: gcc
>>>> Memory debugging: no
>>>> Warning Fun: no
>>>> Crash detection: yes
>>>> UTF8 disabled: no
>>>>
>>>> INPUTS:
>>>> MYSQL: yes
>>>> POSTGRE: yes
>>>> ODBC: no
>>>>
>>>> OUTPUTS:
>>>> PDF: yes
>>>> HTML: Always
>>>> CSV: Always
>>>> TEXT: Always
>>>>
>>>> BINDINGS:
>>>> PHP: no
>>>> PHP entension dir:
>>>> PYTHON: yes
>>>> PYTHON version: 2.4
>>>> PYTHON entension dir:
>>>> ${exec_prefix}/lib/python2.4/site-packages
>>>> JAVA: no
>>>> PERL: no
>>>> PERL entension dir:
>>>>
>>>> Music: Velvet Revolver
>>>>
>>>> Having Problems: rlib-users-TtF/[email protected]
>>>> Want to contribute: rlib-devel-TtF/[email protected]
>>>> [foo rlib-1.3.0]$
>>>>
>>>> Output of make:
>>>> [foo rlib-1.3.0]$ make
>>>> make all-recursive
>>>> make[1]: Entering directory `/usr/ftp/rlib-1.3.0'
>>>> Making all in libsrc
>>>> make[2]: Entering directory `/usr/ftp/rlib-1.3.0/libsrc'
>>>> source='parsexml.c' object='parsexml.lo' libtool=yes \
>>>> depfile='.deps/parsexml.Plo' tmpdepfile='.deps/parsexml.TPlo' \
>>>> depmode=gcc3 /bin/sh ../depcomp \
>>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>>> /usr/include
>>>> -I /usr/local/include/python2.4 -g -O2 -c -o parsexml.lo `test
>>>> -f
>>>> 'parsexml.c' || echo './'`parsexml.c
>>>> mkdir .libs
>>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4
>>>> -g
>>>> -O2 -c parsexml.c -MT parsexml.lo -MD -MP -MF .deps/parsexml.TPlo
>>>> -fPIC
>>>> -DPIC -o .libs/parsexml.o
>>>> source='reportgen.c' object='reportgen.lo' libtool=yes \
>>>> depfile='.deps/reportgen.Plo' tmpdepfile='.deps/reportgen.TPlo' \
>>>> depmode=gcc3 /bin/sh ../depcomp \
>>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>>> /usr/include
>>>> -I /usr/local/include/python2.4 -g -O2 -c -o reportgen.lo
>>>> `test
>>>> -f
>>>> 'reportgen.c' || echo './'`reportgen.c
>>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4
>>>> -g
>>>> -O2 -c reportgen.c -MT reportgen.lo -MD -MP -MF .deps/reportgen.TPlo
>>>> -fPIC -DPIC -o .libs/reportgen.o
>>>> source='layout.c' object='layout.lo' libtool=yes \
>>>> depfile='.deps/layout.Plo' tmpdepfile='.deps/layout.TPlo' \
>>>> depmode=gcc3 /bin/sh ../depcomp \
>>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>>> /usr/include
>>>> -I /usr/local/include/python2.4 -g -O2 -c -o layout.lo `test
>>>> -f
>>>> 'layout.c' || echo './'`layout.c
>>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4
>>>> -g
>>>> -O2 -c layout.c -MT layout.lo -MD -MP -MF .deps/layout.TPlo -fPIC
>>>> -DPIC
>>>> -o .libs/layout.o
>>>> source='api.c' object='api.lo' libtool=yes \
>>>> depfile='.deps/api.Plo' tmpdepfile='.deps/api.TPlo' \
>>>> depmode=gcc3 /bin/sh ../depcomp \
>>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>>> /usr/include
>>>> -I /usr/local/include/python2.4 -g -O2 -c -o api.lo `test -f
>>>> 'api.c' || echo './'`api.c
>>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4
>>>> -g
>>>> -O2 -c api.c -MT api.lo -MD -MP -MF .deps/api.TPlo -fPIC -DPIC -o
>>>> .libs/api.o
>>>> source='resolution.c' object='resolution.lo' libtool=yes \
>>>> depfile='.deps/resolution.Plo' tmpdepfile='.deps/resolution.TPlo' \
>>>> depmode=gcc3 /bin/sh ../depcomp \
>>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>>> /usr/include
>>>> -I /usr/local/include/python2.4 -g -O2 -c -o resolution.lo
>>>> `test
>>>> -f 'resolution.c' || echo './'`resolution.c
>>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4
>>>> -g
>>>> -O2 -c resolution.c -MT resolution.lo -MD -MP -MF
>>>> .deps/resolution.TPlo
>>>> -fPIC -DPIC -o .libs/resolution.o
>>>> source='util.c' object='util.lo' libtool=yes \
>>>> depfile='.deps/util.Plo' tmpdepfile='.deps/util.TPlo' \
>>>> depmode=gcc3 /bin/sh ../depcomp \
>>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>>> /usr/include
>>>> -I /usr/local/include/python2.4 -g -O2 -c -o util.lo `test -f
>>>> 'util.c' || echo './'`util.c
>>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4
>>>> -g
>>>> -O2 -c util.c -MT util.lo -MD -MP -MF .deps/util.TPlo -fPIC -DPIC -o
>>>> .libs/util.o
>>>> util.c:37: error: conflicting types for 'llabs'
>>>> util.c:37: error: conflicting types for 'llabs'
>>>> make[2]: *** [util.lo] Error 1
>>>> make[2]: Leaving directory `/usr/ftp/rlib-1.3.0/libsrc'
>>>> make[1]: *** [all-recursive] Error 1
>>>> make[1]: Leaving directory `/usr/ftp/rlib-1.3.0'
>>>> make: *** [all] Error 2
>>>> [foo rlib-1.3.0]$
>>>>
>>>>
>>>> Thank you in advance!
>>>> Billy-
>>>>
>>>>
>>>> -------------------------------------------------------
>>>> SF email is sponsored by - The IT Product Guide
>>>> Read honest & candid reviews on hundreds of IT Products from real
>>>> users.
>>>> Discover which products truly live up to the hype. Start reading now.
>>>> http://productguide.itmanagersjournal.com/
>>>> _______________________________________________
>>>> Rlib-users mailing list
>>>> [email protected]
>>>> https://lists.sourceforge.net/lists/listinfo/rlib-users
>>>>
>>>
>>>
>>
>>
>>
>> -------------------------------------------------------
>> SF email is sponsored by - The IT Product Guide
>> Read honest & candid reviews on hundreds of IT Products from real users.
>> Discover which products truly live up to the hype. Start reading now.
>> http://productguide.itmanagersjournal.com/
>> _______________________________________________
>> Rlib-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/rlib-users
>>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Rlib-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/rlib-users
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/