Re: Unable to compile rlib 1.3.0 Opteron 64 bit CPU
"Bob Doan" <bdoan-J0aWFLYJOWhWk0Htik3J/[email protected]>
| Newsgroups | gmane.text.rlib.user |
|---|---|
| Message-ID | <[email protected]> |
Did cpdflib get compiled w/ fpic?
> Bob,
>
> I feel one step closer... but not quite there yet. I have made the
> recommended change to pcode.h, did the make clean, make distclean, and
> ./configure --with-pythonver=2.4. Compilation went past the pcode.h error,
> and now I have a new one from ld for libcpdf.a asking to recompile with
> -fPIC. As a result, I tried make clean, make distclean, and ./configure
> --with-pythonver=2.4 --with-pic, but got the same erorr as without.
>
> Thoughts?
> NOTE: Only last few lines of make output have been included below.
>
> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
> -O2 -c value.c -MT value.lo -MD -MP -MF .deps/value.TPlo -fPIC -DPIC -o
> .libs/value.o
> /bin/sh ../libtool --mode=link gcc -g -O2 -o libr.la -rpath
> /usr/local/lib -release 1.3.0 parsexml.lo reportgen.lo layout.lo api.lo
> resolution.lo util.lo pcode.lo pcode_op_functions.lo formatstring.lo
> fxp.lo breaks.lo pdf.lo html.lo txt.lo datasource.lo csv.lo ralloc.lo
> environment.lo free.lo navigation.lo save.lo load.lo containers.lo
> charencoder.lo datetime.lo value.lo -L/usr/local/lib -lxml2 -lpthread -lz
> -lm -L/usr/local/lib -lglib-2.0 -Wl,--export-dynamic -L/usr/local/lib
> -lgmodule-2.0 -ldl -lglib-2.0 -L/usr/lib64/mysql -lmysqlclient -lz
> -lcrypt -lnsl -lm -L/usr/lib64 -lpq -lcpdf -ldl -lcpdf -lm -lc
>
> gcc -shared .libs/parsexml.o .libs/reportgen.o .libs/layout.o .libs/api.o
> .libs/resolution.o .libs/util.o .libs/pcode.o .libs/pcode_op_functions.o
> .libs/formatstring.o .libs/fxp.o .libs/breaks.o .libs/pdf.o .libs/html.o
> .libs/txt.o .libs/datasource.o .libs/csv.o .libs/ralloc.o
> .libs/environment.o .libs/free.o .libs/navigation.o .libs/save.o
> .libs/load.o .libs/containers.o .libs/charencoder.o .libs/datetime.o
> .libs/value.o -Wl,--rpath -Wl,/usr/local/lib -Wl,--rpath
> -Wl,/usr/local/lib -L/usr/local/lib /usr/local/lib/libxml2.so -lpthread
> /usr/local/lib/libgmodule-2.0.so /usr/local/lib/libglib-2.0.so
> -L/usr/lib64/mysql -lmysqlclient -lz -lcrypt -lnsl -L/usr/lib64 -lpq -ldl
> -lcpdf -lm -lc -Wl,--export-dynamic -Wl,-soname -Wl,libr-1.3.0.so -o
> .libs/libr-1.3.0.so
> /usr/bin/ld: /usr/local/lib/libcpdf.a(cpdfInit.o): relocation R_X86_64_32
> can not be used when making a shared object; recompile with -fPIC
> /usr/local/lib/libcpdf.a: could not read symbols: Bad value
> collect2: ld returned 1 exit status
> make[2]: *** [libr.la] Error 1
> make[2]: Leaving directory `/usr/ftp/rlib-1.3.0/libsrc'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/usr/ftp/rlib-1.3.0'
> make: *** [all] Error 2
>
>
>> Seems like you are the 1st 64bit user of rlib
>>
>> in pcode.h line 172 make the "long long" a "gint64"
>>
>> -- bob
>>
>>> Hi,
>>>
>>> Thank you for the suggestion. I just tried it. It created a new set of
>>> erorrs during make. Before running make again, I did a make clean, make
>>> distclean, and ran ./configure --with-pythonver=2.4 again.
>>>
>>> [foo rlib-1.3.0]$ make
>>> make all-recursive
>>> make[1]: Entering directory `/usr/ftp/rlib-1.3.0'
>>> Making all in libsrc
>>> make[2]: Entering directory `/usr/ftp/rlib-1.3.0/libsrc'
>>> source='parsexml.c' object='parsexml.lo' libtool=yes \
>>> depfile='.deps/parsexml.Plo' tmpdepfile='.deps/parsexml.TPlo' \
>>> depmode=gcc3 /bin/sh ../depcomp \
>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>> /usr/include
>>> -I /usr/local/include/python2.4 -g -O2 -c -o parsexml.lo `test
>>> -f
>>> 'parsexml.c' || echo './'`parsexml.c
>>> mkdir .libs
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>>> -O2 -c parsexml.c -MT parsexml.lo -MD -MP -MF .deps/parsexml.TPlo
>>> -fPIC
>>> -DPIC -o .libs/parsexml.o
>>> source='reportgen.c' object='reportgen.lo' libtool=yes \
>>> depfile='.deps/reportgen.Plo' tmpdepfile='.deps/reportgen.TPlo' \
>>> depmode=gcc3 /bin/sh ../depcomp \
>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>> /usr/include
>>> -I /usr/local/include/python2.4 -g -O2 -c -o reportgen.lo `test
>>> -f
>>> 'reportgen.c' || echo './'`reportgen.c
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>>> -O2 -c reportgen.c -MT reportgen.lo -MD -MP -MF .deps/reportgen.TPlo
>>> -fPIC -DPIC -o .libs/reportgen.o
>>> source='layout.c' object='layout.lo' libtool=yes \
>>> depfile='.deps/layout.Plo' tmpdepfile='.deps/layout.TPlo' \
>>> depmode=gcc3 /bin/sh ../depcomp \
>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>> /usr/include
>>> -I /usr/local/include/python2.4 -g -O2 -c -o layout.lo `test -f
>>> 'layout.c' || echo './'`layout.c
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>>> -O2 -c layout.c -MT layout.lo -MD -MP -MF .deps/layout.TPlo -fPIC
>>> -DPIC
>>> -o .libs/layout.o
>>> source='api.c' object='api.lo' libtool=yes \
>>> depfile='.deps/api.Plo' tmpdepfile='.deps/api.TPlo' \
>>> depmode=gcc3 /bin/sh ../depcomp \
>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>> /usr/include
>>> -I /usr/local/include/python2.4 -g -O2 -c -o api.lo `test -f
>>> 'api.c' || echo './'`api.c
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>>> -O2 -c api.c -MT api.lo -MD -MP -MF .deps/api.TPlo -fPIC -DPIC -o
>>> .libs/api.o
>>> source='resolution.c' object='resolution.lo' libtool=yes \
>>> depfile='.deps/resolution.Plo' tmpdepfile='.deps/resolution.TPlo' \
>>> depmode=gcc3 /bin/sh ../depcomp \
>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>> /usr/include
>>> -I /usr/local/include/python2.4 -g -O2 -c -o resolution.lo
>>> `test
>>> -f 'resolution.c' || echo './'`resolution.c
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>>> -O2 -c resolution.c -MT resolution.lo -MD -MP -MF .deps/resolution.TPlo
>>> -fPIC -DPIC -o .libs/resolution.o
>>> source='util.c' object='util.lo' libtool=yes \
>>> depfile='.deps/util.Plo' tmpdepfile='.deps/util.TPlo' \
>>> depmode=gcc3 /bin/sh ../depcomp \
>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>> /usr/include
>>> -I /usr/local/include/python2.4 -g -O2 -c -o util.lo `test -f
>>> 'util.c' || echo './'`util.c
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>>> -O2 -c util.c -MT util.lo -MD -MP -MF .deps/util.TPlo -fPIC -DPIC -o
>>> .libs/util.o
>>> source='pcode.c' object='pcode.lo' libtool=yes \
>>> depfile='.deps/pcode.Plo' tmpdepfile='.deps/pcode.TPlo' \
>>> depmode=gcc3 /bin/sh ../depcomp \
>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>> /usr/include
>>> -I /usr/local/include/python2.4 -g -O2 -c -o pcode.lo `test -f
>>> 'pcode.c' || echo './'`pcode.c
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4 -g
>>> -O2 -c pcode.c -MT pcode.lo -MD -MP -MF .deps/pcode.TPlo -fPIC -DPIC
>>> -o
>>> .libs/pcode.o
>>> pcode.c: In function `rlib_new_operand':
>>> pcode.c:279: warning: cast to pointer from integer of different size
>>> pcode.c: At top level:
>>> pcode.c:655: error: conflicting types for 'rlib_value_new_number'
>>> pcode.h:172: error: previous declaration of 'rlib_value_new_number' was
>>> here
>>> pcode.c:655: error: conflicting types for 'rlib_value_new_number'
>>> pcode.h:172: error: previous declaration of 'rlib_value_new_number' was
>>> here
>>> make[2]: *** [pcode.lo] Error 1
>>> make[2]: Leaving directory `/usr/ftp/rlib-1.3.0/libsrc'
>>> make[1]: *** [all-recursive] Error 1
>>> make[1]: Leaving directory `/usr/ftp/rlib-1.3.0'
>>> make: *** [all] Error 2
>>> [foo rlib-1.3.0]$
>>>
>>>> Hi,
>>>>
>>>> Just comment out or remove line 37 in util.c
>>>>
>>>> I also noticed you don't have php-devel installed. You might want to
>>>> install that if you want php support to work
>>>>
>>>> - bob
>>>>
>>>>> Hello,
>>>>>
>>>>> I am trying to compile rlib 1.3.0 on a server with dual AMD Opteron
>>>>> (tm)
>>>>> Processor 848 (64 bit) CPU's running Red Hat Enterprise Linux AS
>>>>> (version
>>>>> 3 update 2).
>>>>>
>>>>> Info about server:
>>>>> [foo rlib-1.3.0]$ uname -a
>>>>> Linux host.somewhere.com 2.4.21-15.ELsmp #1 SMP Thu Apr 22 00:09:01
>>>>> EDT
>>>>> 2004 x86_64 x86_64 x86_64 GNU/Linux
>>>>> [foo rlib-1.3.0]$
>>>>>
>>>>> I am using GNU Make 3.8.0, gcc version 3.4.3. The configure script
>>>>> works
>>>>> fine (see output below), but make gives an error about conflicting
>>>>> types
>>>>> for llabs. I have tried enabling and disabling various options
>>>>> availble
>>>>> to
>>>>> configure (disabling everything) and still get the error.
>>>>>
>>>>> Any help to get this compiled would be greatly appreciated.
>>>>>
>>>>>
>>>>>
>>>>> Output of configure:
>>>>> [foo rlib-1.3.0]$ ./configure --with-pythonver=2.4
>>>>> checking for a BSD-compatible install... /usr/bin/install -c
>>>>> checking whether build environment is sane... yes
>>>>> checking for gawk... gawk
>>>>> checking whether make sets $(MAKE)... yes
>>>>> checking whether to enable maintainer-specific portions of
>>>>> Makefiles...
>>>>> no
>>>>> checking for gcc... gcc
>>>>> checking for C compiler default output file name... a.out
>>>>> checking whether the C compiler works... yes
>>>>> checking whether we are cross compiling... no
>>>>> checking for suffix of executables...
>>>>> checking for suffix of object files... o
>>>>> checking whether we are using the GNU C compiler... yes
>>>>> checking whether gcc accepts -g... yes
>>>>> checking for gcc option to accept ANSI C... none needed
>>>>> checking for style of include used by make... GNU
>>>>> checking dependency style of gcc... gcc3
>>>>> checking whether make sets $(MAKE)... (cached) yes
>>>>> checking for a BSD-compatible install... /usr/bin/install -c
>>>>> checking build system type... x86_64-redhat-linux-gnu
>>>>> checking host system type... x86_64-redhat-linux-gnu
>>>>> checking for a sed that does not truncate output... /bin/sed
>>>>> checking for egrep... grep -E
>>>>> checking for ld used by gcc... /usr/bin/ld
>>>>> checking if the linker (/usr/bin/ld) is GNU ld... yes
>>>>> checking for /usr/bin/ld option to reload object files... -r
>>>>> checking for BSD-compatible nm... /usr/bin/nm -B
>>>>> checking whether ln -s works... yes
>>>>> checking how to recognise dependent libraries... pass_all
>>>>> checking how to run the C preprocessor... gcc -E
>>>>> checking for ANSI C header files... yes
>>>>> checking for sys/types.h... yes
>>>>> checking for sys/stat.h... yes
>>>>> checking for stdlib.h... yes
>>>>> checking for string.h... yes
>>>>> checking for memory.h... yes
>>>>> checking for strings.h... yes
>>>>> checking for inttypes.h... yes
>>>>> checking for stdint.h... yes
>>>>> checking for unistd.h... yes
>>>>> checking dlfcn.h usability... yes
>>>>> checking dlfcn.h presence... yes
>>>>> checking for dlfcn.h... yes
>>>>> checking for g++... g++
>>>>> checking whether we are using the GNU C++ compiler... yes
>>>>> checking whether g++ accepts -g... yes
>>>>> checking dependency style of g++... gcc3
>>>>> checking how to run the C++ preprocessor... g++ -E
>>>>> checking for g77... g77
>>>>> checking whether we are using the GNU Fortran 77 compiler... yes
>>>>> checking whether g77 accepts -g... yes
>>>>> checking the maximum length of command line arguments... 32768
>>>>> checking command to parse /usr/bin/nm -B output from gcc object... ok
>>>>> checking for objdir... .libs
>>>>> checking for ar... ar
>>>>> checking for ranlib... ranlib
>>>>> checking for strip... strip
>>>>> checking if gcc static flag works... yes
>>>>> checking if gcc supports -fno-rtti -fno-exceptions... no
>>>>> checking for gcc option to produce PIC... -fPIC
>>>>> checking if gcc PIC flag -fPIC works... yes
>>>>> checking if gcc supports -c -o file.o... yes
>>>>> checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports
>>>>> shared libraries... yes
>>>>> checking whether -lc should be explicitly linked in... no
>>>>> checking dynamic linker characteristics... GNU/Linux ld.so
>>>>> checking how to hardcode library paths into programs... immediate
>>>>> checking whether stripping libraries is possible... yes
>>>>> checking for shl_load... no
>>>>> checking for shl_load in -ldld... no
>>>>> checking for dlopen... no
>>>>> checking for dlopen in -ldl... yes
>>>>> checking whether a program can dlopen itself... yes
>>>>> checking whether a statically linked program can dlopen itself... yes
>>>>> checking if libtool supports shared libraries... yes
>>>>> checking whether to build shared libraries... yes
>>>>> checking whether to build static libraries... no
>>>>> configure: creating libtool
>>>>> appending configuration tag "CXX" to libtool
>>>>> checking for ld used by g++... /usr/bin/ld -m elf_x86_64
>>>>> checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
>>>>> checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports
>>>>> shared libraries... yes
>>>>> checking for g++ option to produce PIC... -fPIC
>>>>> checking if g++ PIC flag -fPIC works... yes
>>>>> checking if g++ supports -c -o file.o... yes
>>>>> checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports
>>>>> shared libraries... yes
>>>>> checking dynamic linker characteristics... GNU/Linux ld.so
>>>>> checking how to hardcode library paths into programs... immediate
>>>>> checking whether stripping libraries is possible... yes
>>>>> checking for shl_load... (cached) no
>>>>> checking for shl_load in -ldld... (cached) no
>>>>> checking for dlopen... (cached) no
>>>>> checking for dlopen in -ldl... (cached) yes
>>>>> checking whether a program can dlopen itself... (cached) yes
>>>>> checking whether a statically linked program can dlopen itself...
>>>>> (cached)
>>>>> yes
>>>>> appending configuration tag "F77" to libtool
>>>>> checking if libtool supports shared libraries... yes
>>>>> checking whether to build shared libraries... yes
>>>>> checking whether to build static libraries... no
>>>>> checking for g77 option to produce PIC... -fPIC
>>>>> checking if g77 PIC flag -fPIC works... yes
>>>>> checking if g77 supports -c -o file.o... yes
>>>>> checking whether the g77 linker (/usr/bin/ld -m elf_x86_64) supports
>>>>> shared libraries... yes
>>>>> checking dynamic linker characteristics... GNU/Linux ld.so
>>>>> checking how to hardcode library paths into programs... immediate
>>>>> checking whether stripping libraries is possible... yes
>>>>> checking for exit in -lc... yes
>>>>> checking for exp in -lm... yes
>>>>> checking for pkg-config... /usr/local/bin/pkg-config
>>>>> checking for libxml-2.0 >= 2.6.0... yes
>>>>> checking LIBXML_CFLAGS... -I/usr/local/include/libxml2
>>>>> checking LIBXML_LIBS... -L/usr/local/lib -lxml2 -lpthread -lz -lm
>>>>> checking for glib-2.0 >= 0.0.1... yes
>>>>> checking LIBGLIB_CFLAGS... -I/usr/local/include/glib-2.0
>>>>> -I/usr/local/lib/glib-2.0/include
>>>>> checking LIBGLIB_LIBS... -L/usr/local/lib -lglib-2.0
>>>>> checking for gmodule-2.0 >= 0.0.1... yes
>>>>> checking LIBGMODULE_CFLAGS... -I/usr/local/include/glib-2.0
>>>>> -I/usr/local/lib/glib-2.0/include
>>>>> checking LIBGMODULE_LIBS... -Wl,--export-dynamic -L/usr/local/lib
>>>>> -lgmodule-2.0 -ldl -lglib-2.0
>>>>> checking for mysql_config... /usr/bin/mysql_config
>>>>> checking for pg_config... /usr/bin/pg_config
>>>>> checking for ODBC files... configure: WARNING: ODBC input method is
>>>>> not
>>>>> going to be used
>>>>> checking for php-config... no
>>>>> *** WARNING: PHP NOT FOUND IN PATH. RLIB WILL NOT BE COMPILED WITH
>>>>> SUPPORT FOR IT
>>>>> TEST 1
>>>>> checking for a Python interpreter with version >= 2.4... python
>>>>> checking for python... /usr/local/bin/python
>>>>> checking for python version... 2.4
>>>>> checking for python platform... linux2
>>>>> TEST 2
>>>>> -I ${prefix}/include/python2.4
>>>>> checking for PERL files... configure: WARNING: PERL bindings are not
>>>>> going
>>>>> to be used
>>>>> checking iconv.h usability... yes
>>>>> checking iconv.h presence... yes
>>>>> checking for iconv.h... yes
>>>>> checking for iconv_open... yes
>>>>> checking for iconv_open in -liconv... no
>>>>> checking for libiconv_open in -liconv... no
>>>>> checking where to find iconv_open... libc
>>>>> checking whether iconv takes const char ** or char **... char **
>>>>> checking whether iconv takes ISO8859-1 or ISO-8859-1... ISO8859-1
>>>>> checking cpdflib.h usability... yes
>>>>> checking cpdflib.h presence... yes
>>>>> checking for cpdflib.h... yes
>>>>> checking for cpdf_init in -lcpdf... yes
>>>>> checking for ANSI C header files... (cached) yes
>>>>> checking fcntl.h usability... yes
>>>>> checking fcntl.h presence... yes
>>>>> checking for fcntl.h... yes
>>>>> checking for unistd.h... (cached) yes
>>>>> checking for an ANSI C-conforming const... yes
>>>>> configure: creating ./config.status
>>>>> config.status: creating Makefile
>>>>> config.status: creating rlib.pc
>>>>> config.status: creating libsrc/Makefile
>>>>> config.status: creating src/Makefile
>>>>> config.status: creating src/examples/Makefile
>>>>> config.status: creating src/examples/common/Makefile
>>>>> config.status: creating src/examples/c/Makefile
>>>>> config.status: creating src/examples/php/Makefile
>>>>> config.status: creating src/examples/python/Makefile
>>>>> config.status: creating src/examples/java/Makefile
>>>>> config.status: creating bindings/Makefile
>>>>> config.status: creating bindings/php/Makefile
>>>>> config.status: creating bindings/python/Makefile
>>>>> config.status: creating bindings/perl/Makefile
>>>>> config.status: creating bindings/java/Makefile
>>>>> config.status: creating bindings/interfaces/Makefile
>>>>> config.status: creating inputs/Makefile
>>>>> config.status: creating inputs/mysql/Makefile
>>>>> config.status: creating inputs/odbc/Makefile
>>>>> config.status: creating inputs/postgre/Makefile
>>>>> config.status: creating tests/Makefile
>>>>> config.status: creating config.h
>>>>> config.status: executing depfiles commands
>>>>>
>>>>> rlib-1.3.0:
>>>>>
>>>>> prefix: /usr/local
>>>>> compiler: gcc
>>>>> Memory debugging: no
>>>>> Warning Fun: no
>>>>> Crash detection: yes
>>>>> UTF8 disabled: no
>>>>>
>>>>> INPUTS:
>>>>> MYSQL: yes
>>>>> POSTGRE: yes
>>>>> ODBC: no
>>>>>
>>>>> OUTPUTS:
>>>>> PDF: yes
>>>>> HTML: Always
>>>>> CSV: Always
>>>>> TEXT: Always
>>>>>
>>>>> BINDINGS:
>>>>> PHP: no
>>>>> PHP entension dir:
>>>>> PYTHON: yes
>>>>> PYTHON version: 2.4
>>>>> PYTHON entension dir:
>>>>> ${exec_prefix}/lib/python2.4/site-packages
>>>>> JAVA: no
>>>>> PERL: no
>>>>> PERL entension dir:
>>>>>
>>>>> Music: Velvet Revolver
>>>>>
>>>>> Having Problems: rlib-users-TtF/[email protected]
>>>>> Want to contribute: rlib-devel-TtF/[email protected]
>>>>> [foo rlib-1.3.0]$
>>>>>
>>>>> Output of make:
>>>>> [foo rlib-1.3.0]$ make
>>>>> make all-recursive
>>>>> make[1]: Entering directory `/usr/ftp/rlib-1.3.0'
>>>>> Making all in libsrc
>>>>> make[2]: Entering directory `/usr/ftp/rlib-1.3.0/libsrc'
>>>>> source='parsexml.c' object='parsexml.lo' libtool=yes \
>>>>> depfile='.deps/parsexml.Plo' tmpdepfile='.deps/parsexml.TPlo' \
>>>>> depmode=gcc3 /bin/sh ../depcomp \
>>>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>>>> /usr/include
>>>>> -I /usr/local/include/python2.4 -g -O2 -c -o parsexml.lo
>>>>> `test
>>>>> -f
>>>>> 'parsexml.c' || echo './'`parsexml.c
>>>>> mkdir .libs
>>>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4
>>>>> -g
>>>>> -O2 -c parsexml.c -MT parsexml.lo -MD -MP -MF .deps/parsexml.TPlo
>>>>> -fPIC
>>>>> -DPIC -o .libs/parsexml.o
>>>>> source='reportgen.c' object='reportgen.lo' libtool=yes \
>>>>> depfile='.deps/reportgen.Plo' tmpdepfile='.deps/reportgen.TPlo' \
>>>>> depmode=gcc3 /bin/sh ../depcomp \
>>>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>>>> /usr/include
>>>>> -I /usr/local/include/python2.4 -g -O2 -c -o reportgen.lo
>>>>> `test
>>>>> -f
>>>>> 'reportgen.c' || echo './'`reportgen.c
>>>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4
>>>>> -g
>>>>> -O2 -c reportgen.c -MT reportgen.lo -MD -MP -MF .deps/reportgen.TPlo
>>>>> -fPIC -DPIC -o .libs/reportgen.o
>>>>> source='layout.c' object='layout.lo' libtool=yes \
>>>>> depfile='.deps/layout.Plo' tmpdepfile='.deps/layout.TPlo' \
>>>>> depmode=gcc3 /bin/sh ../depcomp \
>>>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>>>> /usr/include
>>>>> -I /usr/local/include/python2.4 -g -O2 -c -o layout.lo `test
>>>>> -f
>>>>> 'layout.c' || echo './'`layout.c
>>>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4
>>>>> -g
>>>>> -O2 -c layout.c -MT layout.lo -MD -MP -MF .deps/layout.TPlo -fPIC
>>>>> -DPIC
>>>>> -o .libs/layout.o
>>>>> source='api.c' object='api.lo' libtool=yes \
>>>>> depfile='.deps/api.Plo' tmpdepfile='.deps/api.TPlo' \
>>>>> depmode=gcc3 /bin/sh ../depcomp \
>>>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>>>> /usr/include
>>>>> -I /usr/local/include/python2.4 -g -O2 -c -o api.lo `test -f
>>>>> 'api.c' || echo './'`api.c
>>>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4
>>>>> -g
>>>>> -O2 -c api.c -MT api.lo -MD -MP -MF .deps/api.TPlo -fPIC -DPIC -o
>>>>> .libs/api.o
>>>>> source='resolution.c' object='resolution.lo' libtool=yes \
>>>>> depfile='.deps/resolution.Plo' tmpdepfile='.deps/resolution.TPlo' \
>>>>> depmode=gcc3 /bin/sh ../depcomp \
>>>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>>>> /usr/include
>>>>> -I /usr/local/include/python2.4 -g -O2 -c -o resolution.lo
>>>>> `test
>>>>> -f 'resolution.c' || echo './'`resolution.c
>>>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4
>>>>> -g
>>>>> -O2 -c resolution.c -MT resolution.lo -MD -MP -MF
>>>>> .deps/resolution.TPlo
>>>>> -fPIC -DPIC -o .libs/resolution.o
>>>>> source='util.c' object='util.lo' libtool=yes \
>>>>> depfile='.deps/util.Plo' tmpdepfile='.deps/util.TPlo' \
>>>>> depmode=gcc3 /bin/sh ../depcomp \
>>>>> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>>>>> -I/usr/local/include/libxml2 -I/usr/local/include/glib-2.0
>>>>> -I/usr/local/lib/glib-2.0/include -I/usr/local/include/glib-2.0
>>>>> -I/usr/local/lib/glib-2.0/include -I'/usr/include/mysql' -I
>>>>> /usr/include
>>>>> -I /usr/local/include/python2.4 -g -O2 -c -o util.lo `test -f
>>>>> 'util.c' || echo './'`util.c
>>>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/libxml2
>>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>>> -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
>>>>> -I/usr/include/mysql -I /usr/include -I /usr/local/include/python2.4
>>>>> -g
>>>>> -O2 -c util.c -MT util.lo -MD -MP -MF .deps/util.TPlo -fPIC -DPIC -o
>>>>> .libs/util.o
>>>>> util.c:37: error: conflicting types for 'llabs'
>>>>> util.c:37: error: conflicting types for 'llabs'
>>>>> make[2]: *** [util.lo] Error 1
>>>>> make[2]: Leaving directory `/usr/ftp/rlib-1.3.0/libsrc'
>>>>> make[1]: *** [all-recursive] Error 1
>>>>> make[1]: Leaving directory `/usr/ftp/rlib-1.3.0'
>>>>> make: *** [all] Error 2
>>>>> [foo rlib-1.3.0]$
>>>>>
>>>>>
>>>>> Thank you in advance!
>>>>> Billy-
>>>>>
>>>>>
>>>>> -------------------------------------------------------
>>>>> SF email is sponsored by - The IT Product Guide
>>>>> Read honest & candid reviews on hundreds of IT Products from real
>>>>> users.
>>>>> Discover which products truly live up to the hype. Start reading now.
>>>>> http://productguide.itmanagersjournal.com/
>>>>> _______________________________________________
>>>>> Rlib-users mailing list
>>>>> [email protected]
>>>>> https://lists.sourceforge.net/lists/listinfo/rlib-users
>>>>>
>>>>
>>>>
>>>
>>>
>>>
>>> -------------------------------------------------------
>>> SF email is sponsored by - The IT Product Guide
>>> Read honest & candid reviews on hundreds of IT Products from real
>>> users.
>>> Discover which products truly live up to the hype. Start reading now.
>>> http://productguide.itmanagersjournal.com/
>>> _______________________________________________
>>> Rlib-users mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/rlib-users
>>>
>>
>>
>>
>> -------------------------------------------------------
>> SF email is sponsored by - The IT Product Guide
>> Read honest & candid reviews on hundreds of IT Products from real users.
>> Discover which products truly live up to the hype. Start reading now.
>> http://productguide.itmanagersjournal.com/
>> _______________________________________________
>> Rlib-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/rlib-users
>>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Rlib-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/rlib-users
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/