make error rlib 1.3.6

Hi
Trying to build rlib 1.3.6 resulted in the following make errors (configure 
did not throw up any errors but).
What is missing?
Thanks in advance
Pramathesh


perl.c:1791: warning: type defaults to `int' in declaration of `arg3'
perl.c:1791: error: initializer element is not constant
perl.c:1791: warning: data definition has no type or storage class
perl.c:1792: warning: type defaults to `int' in declaration of `result'
perl.c:1792: error: redefinition of 'result'
perl.c:1760: error: previous definition of 'result' was here
perl.c:1792: error: redefinition of 'result'
perl.c:866: error: previous definition of 'result' was here
perl.c:1792: error: initializer element is not constant
perl.c:1792: warning: data definition has no type or storage class
perl.c:1794: warning: type defaults to `int' in declaration of `ST'
perl.c:1794: warning: parameter names (without types) in function declaration
perl.c:1794: error: function `ST' is initialized like a variable
perl.c:1794: warning: data definition has no type or storage class
perl.c:1795: error: syntax error before '(' token
perl.c:1795: warning: type defaults to `int' in declaration of `sv_setiv'
perl.c:1795: error: syntax error before "IV"
perl.c:1796: warning: type defaults to `int' in declaration of `XSRETURN'
perl.c:1796: warning: parameter names (without types) in function declaration
perl.c:1796: warning: data definition has no type or storage class
perl.c:1797: error: syntax error before ':' token
perl.c:1800: warning: type defaults to `int' in declaration of `croak'
perl.c:1800: warning: parameter names (without types) in function declaration
perl.c:1800: warning: data definition has no type or storage class
perl.c:1801: error: syntax error before '}' token
perl.c:1828: error: syntax error before "swig_commands"
perl.c:1828: warning: type defaults to `int' in declaration of `swig_commands'
perl.c:1829: warning: braces around scalar initializer
perl.c:1829: warning: (near initialization for `swig_commands[0]')
perl.c:1829: warning: initialization makes integer from pointer without a cast
perl.c:1829: error: `_wrap_rlib_init' undeclared here (not in a function)
perl.c:1829: warning: excess elements in scalar initializer
perl.c:1829: warning: (near initialization for `swig_commands[0]')
perl.c:1830: warning: braces around scalar initializer
perl.c:1830: warning: (near initialization for `swig_commands[1]')
perl.c:1830: warning: initialization makes integer from pointer without a cast
perl.c:1830: error: `_wrap_rlib_add_datasource_mysql' undeclared here (not in 
a function)
perl.c:1830: warning: excess elements in scalar initializer
perl.c:1830: warning: (near initialization for `swig_commands[1]')
perl.c:1831: warning: braces around scalar initializer
perl.c:1831: warning: (near initialization for `swig_commands[2]')
perl.c:1831: warning: initialization makes integer from pointer without a cast
perl.c:1831: error: `_wrap_rlib_add_datasource_postgres' undeclared here (not 
in a function)
perl.c:1831: warning: excess elements in scalar initializer
perl.c:1831: warning: (near initialization for `swig_commands[2]')
perl.c:1832: warning: braces around scalar initializer
perl.c:1832: warning: (near initialization for `swig_commands[3]')
perl.c:1832: warning: initialization makes integer from pointer without a cast
perl.c:1832: error: `_wrap_rlib_add_datasource_odbc' undeclared here (not in a 
function)
perl.c:1832: warning: excess elements in scalar initializer
perl.c:1832: warning: (near initialization for `swig_commands[3]')
perl.c:1833: warning: braces around scalar initializer
perl.c:1833: warning: (near initialization for `swig_commands[4]')
perl.c:1833: warning: initialization makes integer from pointer without a cast
perl.c:1833: error: `_wrap_rlib_add_datasource_xml' undeclared here (not in a 
function)
perl.c:1833: warning: excess elements in scalar initializer
perl.c:1833: warning: (near initialization for `swig_commands[4]')
perl.c:1834: warning: braces around scalar initializer
perl.c:1834: warning: (near initialization for `swig_commands[5]')
perl.c:1834: warning: initialization makes integer from pointer without a cast
perl.c:1834: error: `_wrap_rlib_add_query_as' undeclared here (not in a 
function)
perl.c:1834: warning: excess elements in scalar initializer
perl.c:1834: warning: (near initialization for `swig_commands[5]')
perl.c:1835: warning: braces around scalar initializer
perl.c:1835: warning: (near initialization for `swig_commands[6]')
perl.c:1835: warning: initialization makes integer from pointer without a cast
perl.c:1835: error: `_wrap_rlib_add_report' undeclared here (not in a 
function)
perl.c:1835: warning: excess elements in scalar initializer
perl.c:1835: warning: (near initialization for `swig_commands[6]')
perl.c:1836: warning: braces around scalar initializer
perl.c:1836: warning: (near initialization for `swig_commands[7]')
perl.c:1836: warning: initialization makes integer from pointer without a cast
perl.c:1836: error: `_wrap_rlib_add_report_from_buffer' undeclared here (not 
in a function)
perl.c:1836: warning: excess elements in scalar initializer
perl.c:1836: warning: (near initialization for `swig_commands[7]')
perl.c:1837: warning: braces around scalar initializer
perl.c:1837: warning: (near initialization for `swig_commands[8]')
perl.c:1837: warning: initialization makes integer from pointer without a cast
perl.c:1837: error: `_wrap_rlib_execute' undeclared here (not in a function)
perl.c:1837: warning: excess elements in scalar initializer
perl.c:1837: warning: (near initialization for `swig_commands[8]')
perl.c:1838: warning: braces around scalar initializer
perl.c:1838: warning: (near initialization for `swig_commands[9]')
perl.c:1838: warning: initialization makes integer from pointer without a cast
perl.c:1838: error: `_wrap_rlib_get_content_type_as_text' undeclared here (not 
in a function)
perl.c:1838: warning: excess elements in scalar initializer
perl.c:1838: warning: (near initialization for `swig_commands[9]')
perl.c:1839: warning: braces around scalar initializer
perl.c:1839: warning: (near initialization for `swig_commands[10]')
perl.c:1839: warning: initialization makes integer from pointer without a cast
perl.c:1839: error: `_wrap_rlib_spool' undeclared here (not in a function)
perl.c:1839: warning: excess elements in scalar initializer
perl.c:1839: warning: (near initialization for `swig_commands[10]')
perl.c:1840: warning: braces around scalar initializer
perl.c:1840: warning: (near initialization for `swig_commands[11]')
perl.c:1840: warning: initialization makes integer from pointer without a cast
perl.c:1840: error: `_wrap_rlib_set_output_format' undeclared here (not in a 
function)
perl.c:1840: warning: excess elements in scalar initializer
perl.c:1840: warning: (near initialization for `swig_commands[11]')
perl.c:1841: warning: braces around scalar initializer
perl.c:1841: warning: (near initialization for `swig_commands[12]')
perl.c:1841: warning: initialization makes integer from pointer without a cast
perl.c:1841: error: `_wrap_rlib_add_resultset_follower_n_to_1' undeclared here 
(not in a function)
perl.c:1841: warning: excess elements in scalar initializer
perl.c:1841: warning: (near initialization for `swig_commands[12]')
perl.c:1842: warning: braces around scalar initializer
perl.c:1842: warning: (near initialization for `swig_commands[13]')
perl.c:1842: warning: initialization makes integer from pointer without a cast
perl.c:1842: error: `_wrap_rlib_add_resultset_follower' undeclared here (not 
in a function)
perl.c:1842: warning: excess elements in scalar initializer
perl.c:1842: warning: (near initialization for `swig_commands[13]')
perl.c:1843: warning: braces around scalar initializer
perl.c:1843: warning: (near initialization for `swig_commands[14]')
perl.c:1843: warning: initialization makes integer from pointer without a cast
perl.c:1843: error: `_wrap_rlib_set_output_format_from_text' undeclared here 
(not in a function)
perl.c:1843: warning: excess elements in scalar initializer
perl.c:1843: warning: (near initialization for `swig_commands[14]')
perl.c:1844: warning: braces around scalar initializer
perl.c:1844: warning: (near initialization for `swig_commands[15]')
perl.c:1844: warning: initialization makes integer from pointer without a cast
perl.c:1844: error: `_wrap_rlib_get_output' undeclared here (not in a 
function)
perl.c:1844: warning: excess elements in scalar initializer
perl.c:1844: warning: (near initialization for `swig_commands[15]')
perl.c:1845: warning: braces around scalar initializer
perl.c:1845: warning: (near initialization for `swig_commands[16]')
perl.c:1845: warning: initialization makes integer from pointer without a cast
perl.c:1845: error: `_wrap_rlib_get_output_length' undeclared here (not in a 
function)
perl.c:1845: warning: excess elements in scalar initializer
perl.c:1845: warning: (near initialization for `swig_commands[16]')
perl.c:1846: warning: braces around scalar initializer
perl.c:1846: warning: (near initialization for `swig_commands[17]')
perl.c:1846: warning: initialization makes integer from pointer without a cast
perl.c:1846: error: `_wrap_rlib_signal_connect' undeclared here (not in a 
function)
perl.c:1846: warning: excess elements in scalar initializer
perl.c:1846: warning: (near initialization for `swig_commands[17]')
perl.c:1847: warning: braces around scalar initializer
perl.c:1847: warning: (near initialization for `swig_commands[18]')
perl.c:1847: warning: initialization makes integer from pointer without a cast
perl.c:1847: error: `_wrap_rlib_signal_connect_string' undeclared here (not in 
a function)
perl.c:1847: warning: excess elements in scalar initializer
perl.c:1847: warning: (near initialization for `swig_commands[18]')
perl.c:1848: warning: braces around scalar initializer
perl.c:1848: warning: (near initialization for `swig_commands[19]')
perl.c:1848: warning: initialization makes integer from pointer without a cast
perl.c:1848: error: `_wrap_rlib_query_refresh' undeclared here (not in a 
function)
perl.c:1848: warning: excess elements in scalar initializer
perl.c:1848: warning: (near initialization for `swig_commands[19]')
perl.c:1849: warning: braces around scalar initializer
perl.c:1849: warning: (near initialization for `swig_commands[20]')
perl.c:1849: warning: initialization makes integer from pointer without a cast
perl.c:1849: error: `_wrap_rlib_add_parameter' undeclared here (not in a 
function)
perl.c:1849: warning: excess elements in scalar initializer
perl.c:1849: warning: (near initialization for `swig_commands[20]')
perl.c:1850: warning: braces around scalar initializer
perl.c:1850: warning: (near initialization for `swig_commands[21]')
perl.c:1850: warning: initialization makes integer from pointer without a cast
perl.c:1850: error: `_wrap_rlib_set_locale' undeclared here (not in a 
function)
perl.c:1850: warning: excess elements in scalar initializer
perl.c:1850: warning: (near initialization for `swig_commands[21]')
perl.c:1851: warning: braces around scalar initializer
perl.c:1851: warning: (near initialization for `swig_commands[22]')
perl.c:1851: warning: initialization makes integer from pointer without a cast
perl.c:1851: error: `_wrap_rlib_set_output_parameter' undeclared here (not in 
a function)
perl.c:1851: warning: excess elements in scalar initializer
perl.c:1851: warning: (near initialization for `swig_commands[22]')
perl.c:1852: warning: braces around scalar initializer
perl.c:1852: warning: (near initialization for `swig_commands[23]')
perl.c:1852: warning: initialization makes integer from pointer without a cast
perl.c:1852: error: `_wrap_rlib_set_output_encoding' undeclared here (not in a 
function)
perl.c:1852: warning: excess elements in scalar initializer
perl.c:1852: warning: (near initialization for `swig_commands[23]')
perl.c:1853: warning: braces around scalar initializer
perl.c:1853: warning: (near initialization for `swig_commands[24]')
perl.c:1853: warning: initialization makes integer from pointer without a cast
perl.c:1853: error: `_wrap_rlib_set_datasource_encoding' undeclared here (not 
in a function)
perl.c:1853: warning: excess elements in scalar initializer
perl.c:1853: warning: (near initialization for `swig_commands[24]')
perl.c:1854: warning: braces around scalar initializer
perl.c:1854: warning: (near initialization for `swig_commands[25]')
perl.c:1854: warning: initialization makes integer from pointer without a cast
perl.c:1854: error: `_wrap_rlib_free' undeclared here (not in a function)
perl.c:1854: warning: excess elements in scalar initializer
perl.c:1854: warning: (near initialization for `swig_commands[25]')
perl.c:1855: warning: braces around scalar initializer
perl.c:1855: warning: (near initialization for `swig_commands[26]')
perl.c:1855: warning: initialization makes integer from pointer without a cast
perl.c:1855: error: `_wrap_rlib_version' undeclared here (not in a function)
perl.c:1855: warning: excess elements in scalar initializer
perl.c:1855: warning: (near initialization for `swig_commands[26]')
perl.c:1856: warning: braces around scalar initializer
perl.c:1856: warning: (near initialization for `swig_commands[27]')
perl.c:1856: warning: initialization makes integer from pointer without a cast
perl.c:1856: error: `_wrap_rlib_graph_add_bg_region' undeclared here (not in a 
function)
perl.c:1856: warning: excess elements in scalar initializer
perl.c:1856: warning: (near initialization for `swig_commands[27]')
perl.c:1857: warning: braces around scalar initializer
perl.c:1857: warning: (near initialization for `swig_commands[28]')
perl.c:1857: warning: initialization makes integer from pointer without a cast
perl.c:1857: error: `_wrap_rlib_graph_clear_bg_region' undeclared here (not in 
a function)
perl.c:1857: warning: excess elements in scalar initializer
perl.c:1857: warning: (near initialization for `swig_commands[28]')
perl.c:1858: warning: braces around scalar initializer
perl.c:1858: warning: (near initialization for `swig_commands[29]')
perl.c:1858: warning: initialization makes integer from pointer without a cast
perl.c:1858: error: `_wrap_rlib_graph_set_x_minor_tick' undeclared here (not 
in a function)
perl.c:1858: warning: excess elements in scalar initializer
perl.c:1858: warning: (near initialization for `swig_commands[29]')
perl.c:1859: warning: braces around scalar initializer
perl.c:1859: warning: (near initialization for `swig_commands[30]')
perl.c:1859: warning: initialization makes integer from pointer without a cast
perl.c:1859: error: `_wrap_rlib_graph_set_x_minor_tick_by_location' undeclared 
here (not in a function)
perl.c:1859: warning: excess elements in scalar initializer
perl.c:1859: warning: (near initialization for `swig_commands[30]')
perl.c:1860: warning: braces around scalar initializer
perl.c:1860: warning: (near initialization for `swig_commands[31]')
perl.c:1860: warning: excess elements in scalar initializer
perl.c:1860: warning: (near initialization for `swig_commands[31]')
perl.c:1861: warning: data definition has no type or storage class
perl.c:1867: error: syntax error before '{' token
perl.c:1871: error: syntax error before "if"
perl.c:1872: warning: type defaults to `int' in declaration of 
`swig_types_initial'
perl.c:1872: error: variable-size type declared outside of any function
perl.c:1872: error: conflicting types for 'swig_types_initial'
perl.c:1810: error: previous definition of 'swig_types_initial' was here
perl.c:1872: warning: data definition has no type or storage class
perl.c:1872: error: syntax error before '++' token
perl.c:1875: warning: type defaults to `int' in declaration of `_init'
perl.c:1875: error: redefinition of '_init'
perl.c:1870: error: previous definition of '_init' was here
perl.c:1875: warning: data definition has no type or storage class
perl.c:1876: error: syntax error before '}' token
perl.c:1879: error: syntax error before '.' token
perl.c:1884: error: syntax error before '.' token
perl.c:1886: warning: type defaults to `int' in declaration of `sv'
perl.c:1886: error: initializer element is not constant
perl.c:1886: warning: data definition has no type or storage class
perl.c:1887: error: syntax error before "if"
perl.c:1892: error: syntax error before '(' token
perl.c:1892: error: syntax error before '.' token
perl.c:1896: error: syntax error before '.' token
perl.c:1898: warning: type defaults to `int' in declaration of `sv'
perl.c:1898: error: redefinition of 'sv'
perl.c:1886: error: previous definition of 'sv' was here
perl.c:1898: error: initializer element is not constant
perl.c:1898: warning: data definition has no type or storage class
perl.c:1899: error: syntax error before "switch"
perl.c:1918: warning: type defaults to `int' in declaration of `SvREADONLY_on'
perl.c:1918: warning: parameter names (without types) in function declaration
perl.c:1918: warning: data definition has no type or storage class
perl.c:1919: error: syntax error before '}' token
perl.c:1921: error: syntax error before numeric constant
perl.c:1921: warning: type defaults to `int' in declaration of `ST'
perl.c:1921: error: function `ST' is initialized like a variable
perl.c:1921: error: `sv_yes' undeclared here (not in a function)
perl.c:1921: warning: data definition has no type or storage class
perl.c:1922: error: syntax error before numeric constant
perl.c:1922: warning: type defaults to `int' in declaration of `XSRETURN'
perl.c:1922: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3087: warning: array 'PL_sig_name' 
assumed to have one element
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3088: warning: array 'PL_sig_num' 
assumed to have one element
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3166: warning: array 'PL_fold' 
assumed to have one element
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3205: warning: array 
'PL_fold_locale' assumed to have one element
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3281: warning: array 'PL_freq' 
assumed to have one element
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3711: error: storage size of 
`PL_vtbl_sv' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3712: error: storage size of 
`PL_vtbl_env' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3713: error: storage size of 
`PL_vtbl_envelem' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3714: error: storage size of 
`PL_vtbl_sig' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3715: error: storage size of 
`PL_vtbl_sigelem' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3716: error: storage size of 
`PL_vtbl_pack' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3717: error: storage size of 
`PL_vtbl_packelem' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3718: error: storage size of 
`PL_vtbl_dbline' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3719: error: storage size of 
`PL_vtbl_isa' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3720: error: storage size of 
`PL_vtbl_isaelem' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3721: error: storage size of 
`PL_vtbl_arylen' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3722: error: storage size of 
`PL_vtbl_glob' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3723: error: storage size of 
`PL_vtbl_mglob' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3724: error: storage size of 
`PL_vtbl_nkeys' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3725: error: storage size of 
`PL_vtbl_taint' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3726: error: storage size of 
`PL_vtbl_substr' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3727: error: storage size of 
`PL_vtbl_vec' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3728: error: storage size of 
`PL_vtbl_pos' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3729: error: storage size of 
`PL_vtbl_bm' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3730: error: storage size of 
`PL_vtbl_fm' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3731: error: storage size of 
`PL_vtbl_uvar' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3732: error: storage size of 
`PL_vtbl_ovrld' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3738: error: storage size of 
`PL_vtbl_defelem' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3739: error: storage size of 
`PL_vtbl_regexp' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3740: error: storage size of 
`PL_vtbl_regdata' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3741: error: storage size of 
`PL_vtbl_regdatum' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3744: error: storage size of 
`PL_vtbl_collxfrm' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3747: error: storage size of 
`PL_vtbl_amagic' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3748: error: storage size of 
`PL_vtbl_amagicelem' isn'tknown
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3750: error: storage size of 
`PL_vtbl_backref' isn't known
/usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3751: error: storage size of 
`PL_vtbl_utf8' isn't known
perl.c:111: warning: 'SWIG_Perl_TypeRegister' defined but not used
perl.c:183: warning: 'SWIG_Perl_TypeDynamicCast' defined but not used
perl.c:195: warning: 'SWIG_Perl_TypeName' defined but not used
perl.c:201: warning: 'SWIG_Perl_TypeQuery' defined but not used
perl.c:487: warning: 'SWIG_Perl_ConvertPtr' defined but not used
perl.c:577: warning: 'SWIG_Perl_NewPointerObj' defined but not used
perl.c:584: warning: 'SWIG_Perl_MakePackedObj' defined but not used
perl.c:596: warning: 'SWIG_Perl_ConvertPacked' defined but not used
perl.c:614: warning: 'SWIG_Perl_SetError' defined but not used
perl.c:619: warning: 'SWIG_Perl_SetErrorSV' defined but not used
perl.c:624: warning: 'SWIG_Perl_SetErrorf' defined but not used
perl.c:684: warning: '_swig_create_magic' defined but not used
perl.c:768: warning: 'swig_types' defined but not used
perl.c:800: warning: 'swig_magic_readonly' defined but not used
perl.c:1810: warning: 'swig_types_initial' defined but not used
perl.c:1870: warning: '_init' defined but not used
make[3]: *** [perl.lo] Error 1
make[3]: Leaving directory `/home/prom/MyDownloads/rlib-1.3.6/bindings/perl'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/prom/MyDownloads/rlib-1.3.6/bindings'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/prom/MyDownloads/rlib-1.3.6'
make: *** [all] Error 2



-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642