Re: make error rlib 1.3.6

Hym... What type of system are you building RLIB on?

If you don't want perl you can add --disable-perl to your configure to
get around this.



On Sat, 2006-01-21 at 01:29 +0530, Pramathesh Ambasta wrote:
> Hi
> Trying to build rlib 1.3.6 resulted in the following make errors (configure 
> did not throw up any errors but).
> What is missing?
> Thanks in advance
> Pramathesh
> 
> 
> perl.c:1791: warning: type defaults to `int' in declaration of `arg3'
> perl.c:1791: error: initializer element is not constant
> perl.c:1791: warning: data definition has no type or storage class
> perl.c:1792: warning: type defaults to `int' in declaration of `result'
> perl.c:1792: error: redefinition of 'result'
> perl.c:1760: error: previous definition of 'result' was here
> perl.c:1792: error: redefinition of 'result'
> perl.c:866: error: previous definition of 'result' was here
> perl.c:1792: error: initializer element is not constant
> perl.c:1792: warning: data definition has no type or storage class
> perl.c:1794: warning: type defaults to `int' in declaration of `ST'
> perl.c:1794: warning: parameter names (without types) in function declaration
> perl.c:1794: error: function `ST' is initialized like a variable
> perl.c:1794: warning: data definition has no type or storage class
> perl.c:1795: error: syntax error before '(' token
> perl.c:1795: warning: type defaults to `int' in declaration of `sv_setiv'
> perl.c:1795: error: syntax error before "IV"
> perl.c:1796: warning: type defaults to `int' in declaration of `XSRETURN'
> perl.c:1796: warning: parameter names (without types) in function declaration
> perl.c:1796: warning: data definition has no type or storage class
> perl.c:1797: error: syntax error before ':' token
> perl.c:1800: warning: type defaults to `int' in declaration of `croak'
> perl.c:1800: warning: parameter names (without types) in function declaration
> perl.c:1800: warning: data definition has no type or storage class
> perl.c:1801: error: syntax error before '}' token
> perl.c:1828: error: syntax error before "swig_commands"
> perl.c:1828: warning: type defaults to `int' in declaration of `swig_commands'
> perl.c:1829: warning: braces around scalar initializer
> perl.c:1829: warning: (near initialization for `swig_commands[0]')
> perl.c:1829: warning: initialization makes integer from pointer without a cast
> perl.c:1829: error: `_wrap_rlib_init' undeclared here (not in a function)
> perl.c:1829: warning: excess elements in scalar initializer
> perl.c:1829: warning: (near initialization for `swig_commands[0]')
> perl.c:1830: warning: braces around scalar initializer
> perl.c:1830: warning: (near initialization for `swig_commands[1]')
> perl.c:1830: warning: initialization makes integer from pointer without a cast
> perl.c:1830: error: `_wrap_rlib_add_datasource_mysql' undeclared here (not in 
> a function)
> perl.c:1830: warning: excess elements in scalar initializer
> perl.c:1830: warning: (near initialization for `swig_commands[1]')
> perl.c:1831: warning: braces around scalar initializer
> perl.c:1831: warning: (near initialization for `swig_commands[2]')
> perl.c:1831: warning: initialization makes integer from pointer without a cast
> perl.c:1831: error: `_wrap_rlib_add_datasource_postgres' undeclared here (not 
> in a function)
> perl.c:1831: warning: excess elements in scalar initializer
> perl.c:1831: warning: (near initialization for `swig_commands[2]')
> perl.c:1832: warning: braces around scalar initializer
> perl.c:1832: warning: (near initialization for `swig_commands[3]')
> perl.c:1832: warning: initialization makes integer from pointer without a cast
> perl.c:1832: error: `_wrap_rlib_add_datasource_odbc' undeclared here (not in a 
> function)
> perl.c:1832: warning: excess elements in scalar initializer
> perl.c:1832: warning: (near initialization for `swig_commands[3]')
> perl.c:1833: warning: braces around scalar initializer
> perl.c:1833: warning: (near initialization for `swig_commands[4]')
> perl.c:1833: warning: initialization makes integer from pointer without a cast
> perl.c:1833: error: `_wrap_rlib_add_datasource_xml' undeclared here (not in a 
> function)
> perl.c:1833: warning: excess elements in scalar initializer
> perl.c:1833: warning: (near initialization for `swig_commands[4]')
> perl.c:1834: warning: braces around scalar initializer
> perl.c:1834: warning: (near initialization for `swig_commands[5]')
> perl.c:1834: warning: initialization makes integer from pointer without a cast
> perl.c:1834: error: `_wrap_rlib_add_query_as' undeclared here (not in a 
> function)
> perl.c:1834: warning: excess elements in scalar initializer
> perl.c:1834: warning: (near initialization for `swig_commands[5]')
> perl.c:1835: warning: braces around scalar initializer
> perl.c:1835: warning: (near initialization for `swig_commands[6]')
> perl.c:1835: warning: initialization makes integer from pointer without a cast
> perl.c:1835: error: `_wrap_rlib_add_report' undeclared here (not in a 
> function)
> perl.c:1835: warning: excess elements in scalar initializer
> perl.c:1835: warning: (near initialization for `swig_commands[6]')
> perl.c:1836: warning: braces around scalar initializer
> perl.c:1836: warning: (near initialization for `swig_commands[7]')
> perl.c:1836: warning: initialization makes integer from pointer without a cast
> perl.c:1836: error: `_wrap_rlib_add_report_from_buffer' undeclared here (not 
> in a function)
> perl.c:1836: warning: excess elements in scalar initializer
> perl.c:1836: warning: (near initialization for `swig_commands[7]')
> perl.c:1837: warning: braces around scalar initializer
> perl.c:1837: warning: (near initialization for `swig_commands[8]')
> perl.c:1837: warning: initialization makes integer from pointer without a cast
> perl.c:1837: error: `_wrap_rlib_execute' undeclared here (not in a function)
> perl.c:1837: warning: excess elements in scalar initializer
> perl.c:1837: warning: (near initialization for `swig_commands[8]')
> perl.c:1838: warning: braces around scalar initializer
> perl.c:1838: warning: (near initialization for `swig_commands[9]')
> perl.c:1838: warning: initialization makes integer from pointer without a cast
> perl.c:1838: error: `_wrap_rlib_get_content_type_as_text' undeclared here (not 
> in a function)
> perl.c:1838: warning: excess elements in scalar initializer
> perl.c:1838: warning: (near initialization for `swig_commands[9]')
> perl.c:1839: warning: braces around scalar initializer
> perl.c:1839: warning: (near initialization for `swig_commands[10]')
> perl.c:1839: warning: initialization makes integer from pointer without a cast
> perl.c:1839: error: `_wrap_rlib_spool' undeclared here (not in a function)
> perl.c:1839: warning: excess elements in scalar initializer
> perl.c:1839: warning: (near initialization for `swig_commands[10]')
> perl.c:1840: warning: braces around scalar initializer
> perl.c:1840: warning: (near initialization for `swig_commands[11]')
> perl.c:1840: warning: initialization makes integer from pointer without a cast
> perl.c:1840: error: `_wrap_rlib_set_output_format' undeclared here (not in a 
> function)
> perl.c:1840: warning: excess elements in scalar initializer
> perl.c:1840: warning: (near initialization for `swig_commands[11]')
> perl.c:1841: warning: braces around scalar initializer
> perl.c:1841: warning: (near initialization for `swig_commands[12]')
> perl.c:1841: warning: initialization makes integer from pointer without a cast
> perl.c:1841: error: `_wrap_rlib_add_resultset_follower_n_to_1' undeclared here 
> (not in a function)
> perl.c:1841: warning: excess elements in scalar initializer
> perl.c:1841: warning: (near initialization for `swig_commands[12]')
> perl.c:1842: warning: braces around scalar initializer
> perl.c:1842: warning: (near initialization for `swig_commands[13]')
> perl.c:1842: warning: initialization makes integer from pointer without a cast
> perl.c:1842: error: `_wrap_rlib_add_resultset_follower' undeclared here (not 
> in a function)
> perl.c:1842: warning: excess elements in scalar initializer
> perl.c:1842: warning: (near initialization for `swig_commands[13]')
> perl.c:1843: warning: braces around scalar initializer
> perl.c:1843: warning: (near initialization for `swig_commands[14]')
> perl.c:1843: warning: initialization makes integer from pointer without a cast
> perl.c:1843: error: `_wrap_rlib_set_output_format_from_text' undeclared here 
> (not in a function)
> perl.c:1843: warning: excess elements in scalar initializer
> perl.c:1843: warning: (near initialization for `swig_commands[14]')
> perl.c:1844: warning: braces around scalar initializer
> perl.c:1844: warning: (near initialization for `swig_commands[15]')
> perl.c:1844: warning: initialization makes integer from pointer without a cast
> perl.c:1844: error: `_wrap_rlib_get_output' undeclared here (not in a 
> function)
> perl.c:1844: warning: excess elements in scalar initializer
> perl.c:1844: warning: (near initialization for `swig_commands[15]')
> perl.c:1845: warning: braces around scalar initializer
> perl.c:1845: warning: (near initialization for `swig_commands[16]')
> perl.c:1845: warning: initialization makes integer from pointer without a cast
> perl.c:1845: error: `_wrap_rlib_get_output_length' undeclared here (not in a 
> function)
> perl.c:1845: warning: excess elements in scalar initializer
> perl.c:1845: warning: (near initialization for `swig_commands[16]')
> perl.c:1846: warning: braces around scalar initializer
> perl.c:1846: warning: (near initialization for `swig_commands[17]')
> perl.c:1846: warning: initialization makes integer from pointer without a cast
> perl.c:1846: error: `_wrap_rlib_signal_connect' undeclared here (not in a 
> function)
> perl.c:1846: warning: excess elements in scalar initializer
> perl.c:1846: warning: (near initialization for `swig_commands[17]')
> perl.c:1847: warning: braces around scalar initializer
> perl.c:1847: warning: (near initialization for `swig_commands[18]')
> perl.c:1847: warning: initialization makes integer from pointer without a cast
> perl.c:1847: error: `_wrap_rlib_signal_connect_string' undeclared here (not in 
> a function)
> perl.c:1847: warning: excess elements in scalar initializer
> perl.c:1847: warning: (near initialization for `swig_commands[18]')
> perl.c:1848: warning: braces around scalar initializer
> perl.c:1848: warning: (near initialization for `swig_commands[19]')
> perl.c:1848: warning: initialization makes integer from pointer without a cast
> perl.c:1848: error: `_wrap_rlib_query_refresh' undeclared here (not in a 
> function)
> perl.c:1848: warning: excess elements in scalar initializer
> perl.c:1848: warning: (near initialization for `swig_commands[19]')
> perl.c:1849: warning: braces around scalar initializer
> perl.c:1849: warning: (near initialization for `swig_commands[20]')
> perl.c:1849: warning: initialization makes integer from pointer without a cast
> perl.c:1849: error: `_wrap_rlib_add_parameter' undeclared here (not in a 
> function)
> perl.c:1849: warning: excess elements in scalar initializer
> perl.c:1849: warning: (near initialization for `swig_commands[20]')
> perl.c:1850: warning: braces around scalar initializer
> perl.c:1850: warning: (near initialization for `swig_commands[21]')
> perl.c:1850: warning: initialization makes integer from pointer without a cast
> perl.c:1850: error: `_wrap_rlib_set_locale' undeclared here (not in a 
> function)
> perl.c:1850: warning: excess elements in scalar initializer
> perl.c:1850: warning: (near initialization for `swig_commands[21]')
> perl.c:1851: warning: braces around scalar initializer
> perl.c:1851: warning: (near initialization for `swig_commands[22]')
> perl.c:1851: warning: initialization makes integer from pointer without a cast
> perl.c:1851: error: `_wrap_rlib_set_output_parameter' undeclared here (not in 
> a function)
> perl.c:1851: warning: excess elements in scalar initializer
> perl.c:1851: warning: (near initialization for `swig_commands[22]')
> perl.c:1852: warning: braces around scalar initializer
> perl.c:1852: warning: (near initialization for `swig_commands[23]')
> perl.c:1852: warning: initialization makes integer from pointer without a cast
> perl.c:1852: error: `_wrap_rlib_set_output_encoding' undeclared here (not in a 
> function)
> perl.c:1852: warning: excess elements in scalar initializer
> perl.c:1852: warning: (near initialization for `swig_commands[23]')
> perl.c:1853: warning: braces around scalar initializer
> perl.c:1853: warning: (near initialization for `swig_commands[24]')
> perl.c:1853: warning: initialization makes integer from pointer without a cast
> perl.c:1853: error: `_wrap_rlib_set_datasource_encoding' undeclared here (not 
> in a function)
> perl.c:1853: warning: excess elements in scalar initializer
> perl.c:1853: warning: (near initialization for `swig_commands[24]')
> perl.c:1854: warning: braces around scalar initializer
> perl.c:1854: warning: (near initialization for `swig_commands[25]')
> perl.c:1854: warning: initialization makes integer from pointer without a cast
> perl.c:1854: error: `_wrap_rlib_free' undeclared here (not in a function)
> perl.c:1854: warning: excess elements in scalar initializer
> perl.c:1854: warning: (near initialization for `swig_commands[25]')
> perl.c:1855: warning: braces around scalar initializer
> perl.c:1855: warning: (near initialization for `swig_commands[26]')
> perl.c:1855: warning: initialization makes integer from pointer without a cast
> perl.c:1855: error: `_wrap_rlib_version' undeclared here (not in a function)
> perl.c:1855: warning: excess elements in scalar initializer
> perl.c:1855: warning: (near initialization for `swig_commands[26]')
> perl.c:1856: warning: braces around scalar initializer
> perl.c:1856: warning: (near initialization for `swig_commands[27]')
> perl.c:1856: warning: initialization makes integer from pointer without a cast
> perl.c:1856: error: `_wrap_rlib_graph_add_bg_region' undeclared here (not in a 
> function)
> perl.c:1856: warning: excess elements in scalar initializer
> perl.c:1856: warning: (near initialization for `swig_commands[27]')
> perl.c:1857: warning: braces around scalar initializer
> perl.c:1857: warning: (near initialization for `swig_commands[28]')
> perl.c:1857: warning: initialization makes integer from pointer without a cast
> perl.c:1857: error: `_wrap_rlib_graph_clear_bg_region' undeclared here (not in 
> a function)
> perl.c:1857: warning: excess elements in scalar initializer
> perl.c:1857: warning: (near initialization for `swig_commands[28]')
> perl.c:1858: warning: braces around scalar initializer
> perl.c:1858: warning: (near initialization for `swig_commands[29]')
> perl.c:1858: warning: initialization makes integer from pointer without a cast
> perl.c:1858: error: `_wrap_rlib_graph_set_x_minor_tick' undeclared here (not 
> in a function)
> perl.c:1858: warning: excess elements in scalar initializer
> perl.c:1858: warning: (near initialization for `swig_commands[29]')
> perl.c:1859: warning: braces around scalar initializer
> perl.c:1859: warning: (near initialization for `swig_commands[30]')
> perl.c:1859: warning: initialization makes integer from pointer without a cast
> perl.c:1859: error: `_wrap_rlib_graph_set_x_minor_tick_by_location' undeclared 
> here (not in a function)
> perl.c:1859: warning: excess elements in scalar initializer
> perl.c:1859: warning: (near initialization for `swig_commands[30]')
> perl.c:1860: warning: braces around scalar initializer
> perl.c:1860: warning: (near initialization for `swig_commands[31]')
> perl.c:1860: warning: excess elements in scalar initializer
> perl.c:1860: warning: (near initialization for `swig_commands[31]')
> perl.c:1861: warning: data definition has no type or storage class
> perl.c:1867: error: syntax error before '{' token
> perl.c:1871: error: syntax error before "if"
> perl.c:1872: warning: type defaults to `int' in declaration of 
> `swig_types_initial'
> perl.c:1872: error: variable-size type declared outside of any function
> perl.c:1872: error: conflicting types for 'swig_types_initial'
> perl.c:1810: error: previous definition of 'swig_types_initial' was here
> perl.c:1872: warning: data definition has no type or storage class
> perl.c:1872: error: syntax error before '++' token
> perl.c:1875: warning: type defaults to `int' in declaration of `_init'
> perl.c:1875: error: redefinition of '_init'
> perl.c:1870: error: previous definition of '_init' was here
> perl.c:1875: warning: data definition has no type or storage class
> perl.c:1876: error: syntax error before '}' token
> perl.c:1879: error: syntax error before '.' token
> perl.c:1884: error: syntax error before '.' token
> perl.c:1886: warning: type defaults to `int' in declaration of `sv'
> perl.c:1886: error: initializer element is not constant
> perl.c:1886: warning: data definition has no type or storage class
> perl.c:1887: error: syntax error before "if"
> perl.c:1892: error: syntax error before '(' token
> perl.c:1892: error: syntax error before '.' token
> perl.c:1896: error: syntax error before '.' token
> perl.c:1898: warning: type defaults to `int' in declaration of `sv'
> perl.c:1898: error: redefinition of 'sv'
> perl.c:1886: error: previous definition of 'sv' was here
> perl.c:1898: error: initializer element is not constant
> perl.c:1898: warning: data definition has no type or storage class
> perl.c:1899: error: syntax error before "switch"
> perl.c:1918: warning: type defaults to `int' in declaration of `SvREADONLY_on'
> perl.c:1918: warning: parameter names (without types) in function declaration
> perl.c:1918: warning: data definition has no type or storage class
> perl.c:1919: error: syntax error before '}' token
> perl.c:1921: error: syntax error before numeric constant
> perl.c:1921: warning: type defaults to `int' in declaration of `ST'
> perl.c:1921: error: function `ST' is initialized like a variable
> perl.c:1921: error: `sv_yes' undeclared here (not in a function)
> perl.c:1921: warning: data definition has no type or storage class
> perl.c:1922: error: syntax error before numeric constant
> perl.c:1922: warning: type defaults to `int' in declaration of `XSRETURN'
> perl.c:1922: warning: data definition has no type or storage class
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3087: warning: array 'PL_sig_name' 
> assumed to have one element
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3088: warning: array 'PL_sig_num' 
> assumed to have one element
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3166: warning: array 'PL_fold' 
> assumed to have one element
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3205: warning: array 
> 'PL_fold_locale' assumed to have one element
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3281: warning: array 'PL_freq' 
> assumed to have one element
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3711: error: storage size of 
> `PL_vtbl_sv' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3712: error: storage size of 
> `PL_vtbl_env' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3713: error: storage size of 
> `PL_vtbl_envelem' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3714: error: storage size of 
> `PL_vtbl_sig' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3715: error: storage size of 
> `PL_vtbl_sigelem' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3716: error: storage size of 
> `PL_vtbl_pack' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3717: error: storage size of 
> `PL_vtbl_packelem' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3718: error: storage size of 
> `PL_vtbl_dbline' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3719: error: storage size of 
> `PL_vtbl_isa' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3720: error: storage size of 
> `PL_vtbl_isaelem' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3721: error: storage size of 
> `PL_vtbl_arylen' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3722: error: storage size of 
> `PL_vtbl_glob' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3723: error: storage size of 
> `PL_vtbl_mglob' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3724: error: storage size of 
> `PL_vtbl_nkeys' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3725: error: storage size of 
> `PL_vtbl_taint' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3726: error: storage size of 
> `PL_vtbl_substr' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3727: error: storage size of 
> `PL_vtbl_vec' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3728: error: storage size of 
> `PL_vtbl_pos' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3729: error: storage size of 
> `PL_vtbl_bm' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3730: error: storage size of 
> `PL_vtbl_fm' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3731: error: storage size of 
> `PL_vtbl_uvar' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3732: error: storage size of 
> `PL_vtbl_ovrld' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3738: error: storage size of 
> `PL_vtbl_defelem' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3739: error: storage size of 
> `PL_vtbl_regexp' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3740: error: storage size of 
> `PL_vtbl_regdata' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3741: error: storage size of 
> `PL_vtbl_regdatum' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3744: error: storage size of 
> `PL_vtbl_collxfrm' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3747: error: storage size of 
> `PL_vtbl_amagic' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3748: error: storage size of 
> `PL_vtbl_amagicelem' isn'tknown
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3750: error: storage size of 
> `PL_vtbl_backref' isn't known
> /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h:3751: error: storage size of 
> `PL_vtbl_utf8' isn't known
> perl.c:111: warning: 'SWIG_Perl_TypeRegister' defined but not used
> perl.c:183: warning: 'SWIG_Perl_TypeDynamicCast' defined but not used
> perl.c:195: warning: 'SWIG_Perl_TypeName' defined but not used
> perl.c:201: warning: 'SWIG_Perl_TypeQuery' defined but not used
> perl.c:487: warning: 'SWIG_Perl_ConvertPtr' defined but not used
> perl.c:577: warning: 'SWIG_Perl_NewPointerObj' defined but not used
> perl.c:584: warning: 'SWIG_Perl_MakePackedObj' defined but not used
> perl.c:596: warning: 'SWIG_Perl_ConvertPacked' defined but not used
> perl.c:614: warning: 'SWIG_Perl_SetError' defined but not used
> perl.c:619: warning: 'SWIG_Perl_SetErrorSV' defined but not used
> perl.c:624: warning: 'SWIG_Perl_SetErrorf' defined but not used
> perl.c:684: warning: '_swig_create_magic' defined but not used
> perl.c:768: warning: 'swig_types' defined but not used
> perl.c:800: warning: 'swig_magic_readonly' defined but not used
> perl.c:1810: warning: 'swig_types_initial' defined but not used
> perl.c:1870: warning: '_init' defined but not used
> make[3]: *** [perl.lo] Error 1
> make[3]: Leaving directory `/home/prom/MyDownloads/rlib-1.3.6/bindings/perl'
> make[2]: *** [all-recursive] Error 1
> make[2]: Leaving directory `/home/prom/MyDownloads/rlib-1.3.6/bindings'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/home/prom/MyDownloads/rlib-1.3.6'
> make: *** [all] Error 2
> 
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
> for problems?  Stop!  Download the new AJAX search engine that makes
> searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
> _______________________________________________
> Rlib-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/rlib-users



-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642