Re: [xeneis rc5] SATA Controller erkennt Platte nicht

Am 08.02.2011 23:37, schrieb Peter Schauder:

Hallo,

> [    4.992805] scsi0 : sata_via
> [    4.994621] scsi1 : sata_via
> [    4.996498] scsi2 : sata_via
> [    4.996604] ata1: SATA max UDMA/133 port i16@0x6400 bmdma 0x7400
> irq 16
> [    4.996611] ata2: SATA max UDMA/133 port i16@0x6800 bmdma 0x7408
> irq 16
> [    4.996615] ata3: PATA max UDMA/133 port i16@0x6c00 bmdma 0x7410
> irq 16
> [    5.305737] ata1: SATA link down (SStatus 0 SControl 310)
> [    5.629732] ata2: SATA link down (SStatus 0 SControl 310)

hmm.
"dmesg | grep ata3"

Was sagt "cat /proc/interrupts"?

Stefan Kuhne